Questions & Answers

Q: QuestionDoes this wall mount have a cable management system?

• A:Answer Yes, this wall mount has built-in wire management to keep cables hidden.

Q: QuestionWhat is the weight capacity of this Sanus TV wall mount?

• A:Answer This Sanus TV wall mount can hold up to 175 lbs.

Q: QuestionWhat is the warranty on this Sanus TV wall mount?

• A:Answer This mount comes with a 10-year warranty on parts.

Q: QuestionHow far does the adjustable arm on this TV mount extend?

• A:Answer The adjustable arm on this TV mount extends up to 30 inches from the wall.

Q: QuestionWhat type of finish does this TV mount have?

• A:Answer This TV mount has a brushed finish for a sleek look.

Q: QuestionHow many inches does the wall mount extend, when fully extended?

Asked 6 years ago by Artie.

• A:Answer The box it comes with says it extends 30 inches.

  Answered 6 years ago by Artie

  Helpful (16)Unhelpful (0)ReportAnswer this question

Q: QuestionI have a Sony Z9G 85 inches. I want to mount the tv over my fireplace but with bookshelves flanking the space will require the TV to be pulled out 13 inches for clearance. The TV weighs 158lbs. Will the Sanus-Elite mount support it long term?

Asked 3 years ago by solaire.

• A:Answer Yes being the max weight rating is 175lb, the rating is always taken while pulled fully out. Most important thing is that your in studs 16 in on center. Ive installed many of these mounts for my customers and to be honest the 175lb rating is actually dumbed down for construction, environment, reasons. In actuality it could probably hold 200 and some change. The mount it self is made out of mild steel and built like workout equipment.

  Answered 3 years ago by AZTECSAVAGEVerified Purchase

  Helpful (6)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionI wasn't asking how much weight the device can support, I was asking the weight of the wall mount itself.

Asked 6 years ago by Artie.

• A:Answer The mount itself weighs 42 lbs. - Katie @ SANUS

  Answered 6 years ago by SanusStaff

  
  Helpful (2)Unhelpful (0)ReportAnswer this question

Q: QuestionIs this mount the same as the Sanus VXF730-B2 mount? How many degrees of swivel will the Sony XR77A80J get with this mount?

Asked 4 years ago by Calvin.

• A:Answer Yes, it's the same mount. This mount can swivel up to 55 degrees. Thanks, - Haydn @ SANUS

  Answered 4 years ago by SanusStaff

  
  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: Questionis this wall mount fit on a samsung q7dr 75" inch tv

Asked 4 years ago by bea.

• A:Answer Hey Bea, Yes this mount should be compatible with your specific TV. This mount can support your TV's 400x400mm VESA pattern and your TV is under the mounts 175lbs weight limit. Thanks, - Haydn @ SANUS

  Answered 4 years ago by SanusStaff

  
  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionWhat's the difference between this mount and the Sanus BLF328-B1, which sells for $320?

Asked 4 years ago by Don.

• A:Answer This mount has more extension, can hold more weight, and support larger TVs than the BLF328 does. Both are top-of-the-line mounts and are great options for larger TVs. Thanks, - Haydn @ SANUS

  Answered 4 years ago by SanusStaff

  
  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionWith professional assistance, can this mount a 77", 86 lb. TV to a Firewall, (or Party Wall) that's paneled? If so are the anchors supplied sufficient?

Asked 4 years ago by needtogetthisright.

• A:Answer Are you able to install into studs on the party wall? If so then this mount should work. This mount can support TV's up to 95" and up to 175lbs. Thanks, - Haydn @ SANUS

  Answered 4 years ago by SanusStaff

  
  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this mount fit the LG 86" NanoCell -86NANO091 Thin Q which I just purchased

Asked 4 years ago by johnsLG86inchnanocell.

• A:Answer Hey John, Yes this mount should be compatible with your specific TV. This mount can support your TVs 600x400mm VESA pattern and your TV is under the mounts 175lbs weight limit. Thanks, - Haydn @ SANUS

  Answered 4 years ago by SanusStaff

  
  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: Questiondoes this tv mount tilt up and down as well as swivel . . if so to what degree? sam

Asked 4 years ago by sampenfield.

• A:Answer Hi Sam, Yes this mount tilts and swivels. It swivels 55° each way. It tilts up 8° and tilts down 17°. Thanks, - Haydn @ SANUS

  Answered 4 years ago by SanusStaff

  
  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionThe Sanus Mount Finder doesn't list a number of 2020 television models, including the Samsung 55" QLED Q90T. Is this mount compatible with that model?

Asked 5 years ago by Laurie.

• A:Answer Hi Laurie, Yes, this mount should be compatible with your specific TV! It will support your TVs 200 x 200mm VESA pattern and your TV is well under the mounts 175 lbs weight limit. Thanks, - Haydn @ SANUS

  Answered 5 years ago by SanusStaff

  
  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionHow far off center will the tv mount?

Asked 5 years ago by Tdale.

• A:Answer Hi Tdale, This mount has up to 6.8" of the lateral shift to the right and left. So you should be able to put it 6.8" off-center and still be able to have your TV centered where you want it. Thanks, - Haydn @ SANUS

  Answered 5 years ago by SanusStaff

  
  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionHow much tilt angle is available? Does this support versa 300 x 300?

Asked 5 years ago by NotSoSatisfiedCustomer.

• A:Answer Hi, This mount can tilt up to 8 degrees up and up to 17 degrees down. Yes this mount can support a 300 x 300 mm VESA pattern. Thanks, - Haydn @ SANUS

  Answered 5 years ago by SanusStaff

  
  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this mount fit an LG OLED 65” B7A?

Asked 5 years ago by xonesandzerosx.

• A:Answer Hi, Thanks for the question. This mount is compatible with your TV! Thanks, Haydn @ Sanus

  Answered 5 years ago by SanusStaff

  
  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionCan i use this if my studs are spaced 24" OC instead of 16" on center?

Asked 5 years ago by rhap.

• A:Answer The wall plate is large enough to accommodate studs spaced 24 inches apart. - Katie @ SANUS

  Answered 5 years ago by SanusStaff

  
  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (1)