Questions & Answers

Name: Sanus - Tilt TV Wall Mount for Most 65" - 140" TVs up to 300lbs - Designed for Extra Large TVs - Black
Brand: Sanus
SKU: 6622614
Price: 187.49 USD
Availability: InStock
Rating: 4.8 (157 reviews)

Sanus - Tilt TV Wall Mount for Most 65" - 140" TVs up to 300lbs - Designed for Extra Large TVs - Black

Model:: BXT7-B1; |
SKU:: 6622614

User rating, 4.8 out of 5 stars with 153 reviews.

Highly rated by customers for:

$187.49

Save $62.50

Comp. Value: $249.99

Show only Answered Questions

Page Showing 1-19 of 19 questions

Ask a Question

QuestionHow is this model different from VXT7-B2?
Asked 7 months ago by TravisW.
- Answer Hello, This is actually the same model. If you have any other questions please reach out to us at 1-800-359-5520 or [email protected]. Thanks, SANUS Support
  Answered 7 months ago by SanusStaff
  Answer this question
QuestionIs this mount compatible with 32 inch stud spacing?
Asked 3 weeks ago by Anonymous.
- Answer yes, it is big enough.
  Answered 3 weeks ago by KevinP
  Answer this question
Questionwill this mount allow me to raise the tv about 4 inches ? it’s mounted holding a TCL 98 and needs to go up 4-5 inches
Asked 1 month ago by Anonymous.
- Answer Yes, you will just have to raise the mounting bracket and then put your TV backnon it.
  Answered 1 month ago by GaryR
  Answer this question
QuestionIs this compatible with TCL 85-Inch QM8 QLED 4K
Asked 1 month ago by Brian.
- Answer Hi Brian, Yes — this mount is compatible with the TCL 85" QM8 QLED. Here’s how it lines up: TV size supported: 65"–140" (QM8 is 85") Weight capacity: up to 300 lbs (QM8 is ~85.8 lbs) VESA range: 200 × 200 through 1100 × 800 (QM8 uses 600 × 500) As long as the TV is installed into solid wood studs or concrete per the instructions, this will be a safe and secure fit. If you’d like help confirming wall type or installation requirements, feel free to contact us at [email protected] or 1-800-359-5520. Thanks, SANUS Support
  Answered 1 month ago by SanusStaff
  Answer this question
QuestionWhat the exact measurements of the wall plate itself and how wide does it expand?
Asked 1 month ago by BracketMeasurements.
- Answer Hello, Thanks for reaching out! I’m happy to clarify the wall plate measurements for this mount. The wall plate itself is approximately 8 inches tall. It features an expandable design with a minimum width of 33.43 inches and a maximum width of 52.93 inches, allowing it to accommodate a wide range of stud spacing for extra-large TVs. If you have any other questions or want to double-check compatibility for your setup, feel free to contact us at [email protected] or 1-800-359-5520. We’re always happy to help. Thanks, SANUS Support
  Answered 1 month ago by SanusStaff
  Answer this question
QuestionDoes this mount work with a 98” Sony Bravia 5?
Asked 2 months ago by Chris.
- Answer Yes, it works on all TVs.
  Answered 1 month ago by GaryR
  Answer this question
QuestionWhat is the maximum length the back plate can be extended?
Asked 2 months ago by Anonymous.
- Answer No extension at all.
  Answered 2 months ago by XinY
  Answer this question
QuestionHi, Is this compatible with the Hisense - 100" Class QD6 Series Hi-QLED 4K UHD HDR Smart Fire TV (2025)
Asked 2 months ago by slashtime.
- Answer Should be fine, this mount comes with extension plates to allow to expand for larger vesa patterns that I’ve ever dealt with.
  Answered 2 months ago by NelsonV
  Answer this question
QuestionMounting 100” TV and am installing a plug. Should the plug be recessed into the wall or will surface mount allow enough space? Proper height of plug? Should the plug be offset from center is so by how much so it does. It interfere with TV mount bolts
Asked 3 months ago by Robert.
- Answer Hello, We need a bit more info about your setup to give an accurate answer. Please reach out to our team at [email protected] or 1-800-359-5520. We’re happy to help. Thanks, SANUS Support
  Answered 2 months ago by SanusStaff
  Answer this question
QuestionIs this compatible with a 08 inch tcl google tv?(model number 98q55k) The manual says to purchase a vesa 600x500 wall mount.
Asked 3 months ago by PS.
- Answer yes I have the TCL Qm8k same vesa 600x500 and it works perfectly
  Answered 2 months ago by RayS
  Answer this question
QuestionIs this mount compatible with samsung 83 inch model qn83s95fae
Asked 3 months ago by Nampa.
- Answer Hello, Yes — this mount is compatible with the Samsung QN83S95FAE. It supports TVs from 65 to 140 inches and works with VESA patterns up to 900 x 600, which covers the mounting pattern on that Samsung model. If you have any other questions, feel free to reach out to us at [email protected] or 1-800-359-5520. Thanks, SANUS Support
  Answered 2 months ago by SanusStaff
  Answer this question
QuestionCan this be mounted if my wall studs are 36 inches apart?
Asked 5 months ago by Amber.
- Answer ChatGPT said: Hello, This SANUS tilt mount is designed to install on wall studs that are 16" or 24" apart, which are the standard stud spacings. Unfortunately, it cannot be mounted to studs that are 36" apart, as the wall plate will not span that distance for a secure installation. If you’d like more details on compatible installation surfaces, feel free to reach out to SANUS Customer Care at [email protected] or 1-800-359-5520. Thanks, SANUS Support
  Answered 4 months ago by SanusStaff
  Answer this question
QuestionI have a 65' SONY flat TV. Will this wall mount allow sufficient access to all the plugs in the back of the TV (HDMI, Ethernet, Apple TV, Direct TV box, etc.)?
Asked 5 months ago by Sue.
- Answer Hi Sue, This mount features upward tilt of 7 degrees and down 10 degrees so it should allow for sufficient access to the ports and cables on the back of your TV. Thanks, SANUS Support
  Answered 4 months ago by SanusStaff
  Answer this question
QuestionCan this mount be used with metal studs in commercial building?
Asked 5 months ago by CallumR.
- Answer Hello, We’d need a bit more information about your setup before confirming whether this mount can be used with metal studs in your building. Please reach out to us at [email protected] or call 1-800-359-5520, and our support team will be happy to walk you through the best installation options. Thanks, SANUS Support
  Answered 5 months ago by SanusStaff
  Answer this question
QuestionWill this work with a Sam sung curve model un65nu7300
Asked 5 months ago by G.
- Answer Hello, Yes this mount should be compatible with your TV. If you have any other questions please reach out to us at [email protected] or call 1-800-359-5520. Thanks, SANUS Support
  Answered 5 months ago by SanusStaff
  Answer this question
QuestionCan this be mounted on to an angled wall that is not 100% vertical? The wall is at a 15% pitch and we would like to mount a TV to the wall.
Asked 6 months ago by Anonymous.
- Answer It does lock into the mount. I would think it would work as long as the wall mount is in studs.
  Answered 5 months ago by JoeD
  Answer this question
QuestionWill this mount on cinder block wall with obviously anchor screws?
Asked 6 months ago by T.
- Answer Hello, Yes, this SANUS tilt mount can be installed on a cinder block wall using the proper anchors. The included hardware is designed for wood studs, so for a cinder block installation you’ll need to use heavy-duty masonry anchors (not included) that are rated to support your TV’s weight. A hammer drill is also recommended to ensure a secure fit. If you’d like guidance on selecting the right anchors or have any other installation questions, feel free to reach out to us at [email protected] or call 1-800-359-5520. Thanks, SANUS Support
  Answered 5 months ago by SanusStaff
  Answer this question
QuestionDoes this TV tilt wall mount also move side to side?
Asked 6 months ago by erjlg3.
- Answer Yes. Depending on the size of the TV, it will move 1 to 6 inches or more.
  Answered 5 months ago by JoeD
  Answer this question
QuestionI know the specifications state - "Ideal for extra-large TVs including TCL 98", Hisense 100", and Samsung 98." Would this also work for a Large LG TV as well?
Asked 8 months ago by Doctor.
- Answer Yes. They all have similar mount locators on the back of the TV.
  Answered 5 months ago by JoeD
  Answer this question

Showing 1-19 of 19 questions

Questions & Answers

Sanus - Tilt TV Wall Mount for Most 65" - 140" TVs up to 300lbs - Designed for Extra Large TVs - Black

Q: QuestionHow is this model different from VXT7-B2?

Q: QuestionIs this mount compatible with 32 inch stud spacing?

Q: Questionwill this mount allow me to raise the tv about 4 inches ? it’s mounted holding a TCL 98 and needs to go up 4-5 inches

Q: QuestionIs this compatible with TCL 85-Inch QM8 QLED 4K

Q: QuestionWhat the exact measurements of the wall plate itself and how wide does it expand?

Q: QuestionDoes this mount work with a 98” Sony Bravia 5?

Q: QuestionWhat is the maximum length the back plate can be extended?

Q: QuestionHi, Is this compatible with the Hisense - 100" Class QD6 Series Hi-QLED 4K UHD HDR Smart Fire TV (2025)

Q: QuestionMounting 100” TV and am installing a plug. Should the plug be recessed into the wall or will surface mount allow enough space? Proper height of plug? Should the plug be offset from center is so by how much so it does. It interfere with TV mount bolts

Q: QuestionIs this compatible with a 08 inch tcl google tv?(model number 98q55k) The manual says to purchase a vesa 600x500 wall mount.

Q: QuestionIs this mount compatible with samsung 83 inch model qn83s95fae

Q: QuestionCan this be mounted if my wall studs are 36 inches apart?

Q: QuestionI have a 65' SONY flat TV. Will this wall mount allow sufficient access to all the plugs in the back of the TV (HDMI, Ethernet, Apple TV, Direct TV box, etc.)?

Q: QuestionCan this mount be used with metal studs in commercial building?

Q: QuestionWill this work with a Sam sung curve model un65nu7300

Q: QuestionCan this be mounted on to an angled wall that is not 100% vertical? The wall is at a 15% pitch and we would like to mount a TV to the wall.

Q: QuestionWill this mount on cinder block wall with obviously anchor screws?

Q: QuestionDoes this TV tilt wall mount also move side to side?

Q: QuestionI know the specifications state - "Ideal for extra-large TVs including TCL 98", Hisense 100", and Samsung 98." Would this also work for a Large LG TV as well?

Most-viewed items

QuestionHow is this model different from VXT7-B2?

QuestionIs this mount compatible with 32 inch stud spacing?

Questionwill this mount allow me to raise the tv about 4 inches ? it’s mounted holding a TCL 98 and needs to go up 4-5 inches

QuestionIs this compatible with TCL 85-Inch QM8 QLED 4K

QuestionWhat the exact measurements of the wall plate itself and how wide does it expand?

QuestionDoes this mount work with a 98” Sony Bravia 5?

QuestionWhat is the maximum length the back plate can be extended?

QuestionHi, Is this compatible with the Hisense - 100" Class QD6 Series Hi-QLED 4K UHD HDR Smart Fire TV (2025)

QuestionMounting 100” TV and am installing a plug. Should the plug be recessed into the wall or will surface mount allow enough space? Proper height of plug? Should the plug be offset from center is so by how much so it does. It interfere with TV mount bolts

QuestionIs this compatible with a 08 inch tcl google tv?(model number 98q55k) The manual says to purchase a vesa 600x500 wall mount.

QuestionIs this mount compatible with samsung 83 inch model qn83s95fae

QuestionCan this be mounted if my wall studs are 36 inches apart?

QuestionI have a 65' SONY flat TV. Will this wall mount allow sufficient access to all the plugs in the back of the TV (HDMI, Ethernet, Apple TV, Direct TV box, etc.)?

QuestionCan this mount be used with metal studs in commercial building?

QuestionWill this work with a Sam sung curve model un65nu7300

QuestionCan this be mounted on to an angled wall that is not 100% vertical? The wall is at a 15% pitch and we would like to mount a TV to the wall.

QuestionWill this mount on cinder block wall with obviously anchor screws?

QuestionDoes this TV tilt wall mount also move side to side?

QuestionI know the specifications state - "Ideal for extra-large TVs including TCL 98", Hisense 100", and Samsung 98." Would this also work for a Large LG TV as well?