Questions & Answers

Q: QuestionHow do I hook it up? AV 1?

Asked 5 years ago by Turntable.

• A:Answer I hooked up my VIZIO 4K HDTV to the receiver by using Left and Right Audio cables from my HDTV and out to the AV 2 inputs of the receiver. All components (Blue-ray DVD Player, 4K Roku streaming stick are connected to my HDTV. My HDTV has 4 HDMI inputs and I find this as an easier way to connect to the receiver. Just make sure you choose the AV 2 setting of your receiver for playback of sound from your HDTV. Be sure to turn the volume on your HDTV to 0. Then you can choose on your receiver: 2 Channel, 5 Channel and all of the settings on your receiver for the best sound. I have 5 speakers and a Sony powered Subwoofer connected to my receiver. When I watch 4K movies on my 4K HDTV, I set my receiver for Dolby ATMOS for a truer 5.1 surround sound experience. I did not hook up to AV 1 because AV 1 showed a video input next to AV 2 inputs of video, audio left & right. I believe the audio left and right were to the left of the video input but are only labeled as coaxial inputs so not being sure of this connection I opted for AV 2.

  Answered 5 years ago by Johnson

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWhat is the warranty and is it the same for the open box purchase

Asked 5 years ago by Gus.

Q: QuestionI currently have a Soundbar with a Bluetooth subwoofer. Will the subwoofer connect or disconnect if I have music playing through my cellphone?

Asked 5 years ago by Ro.

Q: Questioni had and onkyo reciever that i replaced with the yamaha 5.1 but now the yamaha remote wont work through the IR device .... how can i connect it ?

Asked 5 years ago by trax.

Q: QuestionI have speakers in my bar and out on the deck. Can this be hooked up to play either set of speakers or both (i.e. A, B, or A&B at same time).

Asked 5 years ago by RHart.

• A:Answer It does not have separate zones like an A & B

  Answered 5 years ago by Hood63

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionTHis unit has analog input in the back - will these work for a CD player & does input selector list CD or do I assign AUdio for the CD player?

Asked 5 years ago by MDV999.

• A:Answer the analog input will show up as AV 1 or something like that. You can manually change it to display CD if you like. It will work with a CD player.

  Answered 5 years ago by Hood63

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionCan I hooked this to a woo watts subwoofer

Asked 5 years ago by Anonymous.

• A:Answer As long as that sub woofer uses standard speaker connections you can.

  Answered 5 years ago by KyleVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionCan I hook up a Bose acoustimas 10 with this rcvr?

Asked 5 years ago by Aries.

• A:Answer The Acoustimass 10 series V is rated for 10-200 W per channel, 4-8 ohms so this AV receiver should work fine

  Answered 5 years ago by Hood63

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionDoe's this have am fm radio?

Asked 5 years ago by arnie.

• A:Answer Yes it does

  Answered 5 years ago by KyleVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: Questioncan the ubs port read/play a 128gb flash drive?

Asked 5 years ago by bigal30.

• A:Answer Sigh As long as it's FAT16 or FAT32 format. Supports WAV (PCM format only) MP3, WMA and MPEG4 (1-2 channel audio only). Sampling rate up to 48 kHz Quantization bit rate is 16 bit only. Will not work with Digital Rights Management (DRM) content. Will not work with an extension cord (device must be connected directly) Will not work with encrypted files. OPERATION OF ALL USB DEVICES CANNOT BE GUARANTEED.

  Answered 5 years ago by Hood63

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI see this powers 145w to each channel. I only plan to run two passive speakers and a powered sub. If I get speakers that require over 145w, is there a way to connect two of the channels together to add up to 290w?

Asked 5 years ago by erik.

• A:Answer No you can't do that unless you want to smoke the amplifier section of the receiver. Just hook on speaker to the Left main, and one to the right main, and use your pre-amp sub out plug and go. Just because your speakers are rated for over 145wpc, they will should play just fine with the power this receiver has.

  Answered 5 years ago by AnalogForever

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionDoes this unit support center, left and right front, left and right surround speakers as well as sub woofer?

Asked 5 years ago by jm8029.

• A:Answer It's a 5.1 AVR. That means the five (5) speakers you described and one sub woofer (.1 in the 5.1)

  Answered 5 years ago by Hood63

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill a standard univerSal remote working with the Yamaha RXV385?

Asked 5 years ago by Grumpy.

Q: Questioncan i use 4 ohm speakers in front and 16 ohm speakers in rear for surround and a center channel by pioneer

Asked 5 years ago by bob.

• A:Answer It's recommended 6-8 ohm's so I wouldn't

  Answered 5 years ago by Hood63

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionIf I wanted to just hook up 2 tower speakers initially does this unit have a sound field setting that you would select or will it direct the sound to the 2 tower speakers automatically?

Asked 5 years ago by Gomez.

• A:Answer You would manually have to set it to "STEREO".

  Answered 5 years ago by Hood63

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionCan you use banana plugs for the connections to this receiver?

Asked 5 years ago by Mike.

• A:Answer Yes, all 5 speaker connections will accept banana plugs.

  Answered 5 years ago by DanoVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionIs this compatible with AppleTV 4K

Asked 5 years ago by AdventureDad.

• A:Answer Yes, it has several HDMI inputs on the back to handle Roku’s, AppleTV, Amazon sticks, etc.

  Answered 5 years ago by BradleyVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionAre the speaker connection to the receiver just wire or plug in connections?

Asked 5 years ago by Rikan111.

• A:Answer Bare wire or you can use banana plugs.

  Answered 5 years ago by Hood63

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionIs this receiver compatible with base av35 receiver?

Asked 5 years ago by Anonymous.