Customer Ratings & Reviews

Verdict. The Yale Assure Lock 2 replaced another type of smart lock that didn’t have a keypad. While I loved the old lock because I was able to keep the original external hardware of the door, the rest of the family felt it was a significant inconvenient to find the right app to open the door, so in the end, I was the only one who used it. With this new lock, the whole family can quickly get in with their fingerprint, and/or with a code. The app could use some improvements. Installation. Hardware installation took 25 minutes and getting through the software setup took about 20 minutes. I was lucky that the existing door hole and setup was compatible with this lock. After removing the old hardware, I followed the step-by-step instructions to install the new lock, minus DoorSense since our home alarm system already tracks opening/closing. The installation was easy, all parts aligned nicely and the bolt slides easily and without friction. Four AA batteries are included… thank you! Unfortunately, the previous hardware left marks on the door (see picture) that will require some paint touchup. The software installation was a bit more difficult than the hardware. I downloaded the Yale app, setup an account, updated the photo of my house (it looks like it doesn’t take, but it works when you go back into the app later), and then setup fingerprint and a passcode. This was fairly smooth. Then I tried to setup HomeKit but the app was not able to scan the code or detect the new lock by proximity. I also enabled the skill in Alexa, but could not get that to work either. After about 5 attempts with HomeKit and Alexa, I stopped and moved on. Esthetics. Besides the paint blemish from the old hardware, the lock on the exterior of the door looks very nice. It’s small, sleek, and matches the door color. On the other hand, the door latch on the interior of the door is very large and unappealing, but it’s understandable. App. The app is not elegant, and navigation and settings are not intuitive, but to be fair, it features a decent amount of options. Unfortunately, it also takes a bit of time to connect to the lock from the app. The app allows for locking/unlocking, tracking activity, managing access (codes and fingerprint), and controlling options. Options allow for increased security (both fingerprint and code, like 2-factor), auto-unlock (for example when getting home - location tracking is required), auto-lock (by location or by time), DoorSense, smart integration, and calibration. The best feature for us has been the ability to quickly assign codes and register fingerprints, to include scheduled activation and cancellation of guest codes… that’s fantastic! You can add a user for just fingerprint and register their fingerprint while they stand next to you, without the requirement that they download the app – both of my kids have fingerprint access that way. Performance. Use of the fingerprint has worked flawlessly in the first few days of testing. Use of a code is also very quick and effective. We love both options. Pressing the “Yale” button to lock also works well. However, use of the app to lock/unlock is slow and clunky; we will never use it for that. Yale has included nice security features: various code lengths (must press the check sign after you put all the numbers you want, up to eight), vacation mode to disable all codes, auto-lock, and delayed attempts after too many wrong codes. Things I love. - Most convenient use of our front door in a decade! - Easy hardware install if your door is the right size; the kit includes different size screws to support many door types - Ability to easily manage users as well as guest codes - Ability to set start date and expiration for guest codes - Auto-lock and auto-unlock are great features; we only use auto-lock after 5 minutes - Vacation mode disables all codes; we will use that! Things I don’t love. - Smart integration was disappointing. I wish this lock was just a bit more expensive and included the smart module - The Yale App is not elegant and not intuitive. Lots of opportunities for improvement there - Smart alerts do not work unless you are home AND near enough to be Bluetooth-connected to the lock, or if the lock is connected to WiFi (through the smart module), so… smart alerts essentially don’t work - HomeKit integration (or the HomeKit app) doesn’t work - The “Works With” section indicates that this lock works with Alexa. We enabled the skill in the Alexa app, but it doesn’t work. Generally, Alexa integration is simple and works well. This is disappointing since it would be amazing to be able to voice-command the unlocking of the front door! I guess I will keep trying Overall, this is a great solution for a fingerprint or code entry lock; it works reliably and quickly. The app is not great for locking or unlocking because it’s too slow to connect, but it enables access to many great options. The lock also needs to fully integrate with IOT and smart speakers. Overall, I recommend this lock for fingerprint and code entry. I think we will be very happy with it.

Works great! The keyless entry allows me to add family members their own personal keyless pad entry code or finger printing image. Awesome product

Yale has released their new Assure Smart Lock 2 Touch, and it doesn't disappoint. The box includes the exterior keypad, interior lock, strike plate, adjustable deadbolt, 4 AA batteries, mounting plate, mounting hardware, DoorSense module w/hardware, reset pin, and full user manual/paperwork. The electronics of the lock come with a manufacturer's 2-year warranty; however, has multiple warranty periods depending if the lock is used for a single family home or a rental. Refer to the warranties on Yale's website for more information. DISCLAIMER: My door already had a "regular" Yale deadbolt lock installed, so I did not have to do any special cutting or measuring. I simply removed the old lock, and the new one fit perfectly in its place. The lock I installed did NOT have the Wi-Fi module installed. It was key-free and used a keypad instead of a touchscreen. PROS: ----------- * NO MORE FUMBLING WITH KEYS!! * The lock was extremely easy to install. If no cutting is involved, the installer can simply use the instructions that are dictated by the app (with video too) to get through the installation quickly and easily. It took me about 10-15 minutes to install. * The lock looks great. The finish is classy, and it has a matte finish. * The fingerprint reader works great. There is no code needed when using the fingerprint reader (which is the Yale logo on the keypad). Just choose your finger to save to the system, press it on the Yale symbol, and it opens immediately. To lock, simply touch the Yale logo with any finger - it only needs the actual fingerprint to UNLOCK, but can LOCK with any finger. * Another option is to set up a PIN code for a user. The user can have the option to use a code OR the fingerprint reader - both are not required together to UNLOCK. * The backlit buttons appear when the Yale logo is touched so the user can see the buttons and enter their code. The buttons are easy to see when lit and easy to press. Press the checkmark after entering the PIN in order to UNLOCK the lock. This allows for multiple lengths of PINs to be used and can keep people from simply trying different codes. The software will also create a delay for the next code to be entered if you have too many failed attempts. * The DoorSense module can be installed on the door facing beside the lock or embedded in the door frame for a more stealth look. This is useful if you want to ensure the lock locks itself automatically if someone forgets to lock the door behind them after a predetermined amount of time. If you have the Wi-Fi module, I believe it can also notify a user if the door has been left ajar or is unlocked. * You can also lock or unlock the lock via the app (owner) from the main screen. * You can create guest PINs for anyone in the app. Just enter their name into the app and give them their unique PIN. Then you'll know exactly who entered the home. If you give everyone a generic code, that's fine; however, you won't see in the logs who actually unlocked the lock. * The AA batteries are extremely easy to access on the inside lock module. The top cover slides off easily for access. CONS: ----------- * It comes with a "basic" strike plate. I did not use the one that came in the box. Instead I installed a longer 5-7/8" rectangular strike plate which offers a bit more security. I would have liked to have had that longer strike plate made available in the hardware included. OTHER OBSERVATIONS: ----------- * My lock did not include a wi-fi module, but one can be purchased separately. My lock can only be setup and configured when within bluetooth range if using the app. The wi-fi option would give the user the ability to open the lock from anywhere in the world as long as the lock was wi-fi connected. * A user has to have the Yale lock app in order to be classified as an "owner" in order to have the option to enter a code OR use a fingerprint. A user can still be defined and given a PIN without them having the Yale lock app; however, they won't be able to use the fingerprint reader unless they get the app and become an "owner". * If the Wi-Fi module is used, battery life will be slightly shortened; however, I don't know by how much. Life is shortened because it has to be constantly connected to the wi-fi network. * You can set up the lock to auto-lock or unlock when your phone approaches or gets too far from the lock. This feature will force you to "allow access" all the time on your phone which may cause your phone battery to use more power more often than if this feature is OFF. If activated, then you won't have to enter a PIN or use your fingerprint to get in. This is another user convenience that the user will have to determine if it's worth doing. Keep in mind that if you have a garage door (for your car to enter) that's near this lock, when you pull in, you may trigger the door to unlock even though you're not using it. This could pose a security risk if someone is lurking nearby, so keep proximity or multiple garage door scenarios in mind before using the auto-unlock feature. * The lock has to be lined up perfectly for when the door is closed so it doesn't jam up against or rub hard against the strike plate. It simply won't work unless the deadbolt is lined up correctly to go into the strike plate hole without being obstructed in some way. * This lock works with Apple Home (tap phone to lock); however, I don't utilize this feature since we use Android devices. The manual states it can also works with Google HOme, Alexa, SmartThings, Phillips Hue, ecobee Smart Security, and AirBnB. * The lock can hold up to 250 codes CONCLUSION: ===================== This lock is exactly what I have been wanting for a while now. The biggest positive is that we no longer have to leave with keys or fumble with keys upon returning. If you need the keyed version for a backup option to get in, that's fine; however a majority of the time, a fingerprint or code will be used, making this super easy to unlock without digging into pockets or purses. Even the Apple Home connection is great since most people use iPhones. If you turn on auto-lock, it may be even easier and more convenient if you're able to utilize that feature without creating a security risk. Overall, I love the lock and will absolutely buy another one in the future. Keep in mind that it's not fully remote unless you get the Wi-Fi module. This is an incredible product. Great job, Yale!

A few years ago I reviewed a Yale lock that is pretty much the same lock as this one. However, it included the optional WiFi module and this lock is Bluetooth only. Some things have been improved and some not so much. Keep in mind that since this lock is Bluetooth only, you Must be in range of the lock to use the app. WiFi module needed to use Alexa or use app when not in BT range. Pros: Feels very solid and well-made, like a lock should. I like the fact that you can verify if the door is ajar or locked with the sense feature on the app. You can lock and unlock with the app, fingerprint and PIN number. Being able to give different pass codes to family and friends that can be permanent or expire is a very useful feature. The app can log every time the door is opened and closed, locked and unlocked and by whom or if manually with the knob. I like the auto-lock feature and the “passage” mode that is easy to turn on by pressing a button on the inside part of the lock. It automatically turns this feature off when you manually lock the door or tell it to lock with the app. You can enable the LED under the lock knob to flash the lock’s status. Red is locked and green is unlocked. The fingerprint scanner works great and consistently. They got that Right! Options for requiring password or biometric verification to operate the lock from a mobile device. As in additional security in addition to what is required to access the phone normally. Numbers on the screen are easy to read in the dark. Makes clicking sound when you touch numbers. Plays a little melody upon correct entry and unlocks the door. You can set how many incorrect attempts before a delay, and delay time, and or lock the device out. Comes with 4 AA batteries. Battery cover is easy to remove and replace. The app works fine on our Android phones. What’s better with this lock than the older one: The keypad is improved so that you can see (circles) where the numbers are, but the numbers are not printed on the circles. Meaning that in direct sunlight the backlighting to show the numbers is insufficient. The older lock had a smooth matte finish, and you had to hope you were hitting the exact right spot. The lock mechanically operates faster than the older one. Needs fixed: The keypad is just a backlit membrane numeric pad. It’s completely black until you touch Yale at the top or a circle where a number should be Printed. For anyone that’s visually impaired this could be a problem because it’s smooth with no tactile feel at all. Just makes a clicking sound when you touch the buttons. The numbers are pretty much invisible in direct sunlight. See photo. They should have printed them or embossed them white into the touchpad. If you have someone in your household that is visually impaired, they might not be able to use the keypad to gain entry. But the fingerprint scanner solves that. All of the manufacturer’s photos for all of the Yale smart locks show the numbers visible on the screens / touchpads. There’s no way to tell if the numbers are printed on the pad or not unless you look at reviewer’s photos where some reviewers show a blank dormant screen. Installation: You have two options for installing the door status sensor magnet. Attach it to the case molding around the door inside the house or drill a hole into the doorframe, insert the magnet and then cap it. The manual tells you to use a ⅝” inch wide paddle bit to drill a ½” deep hole. The magnet and cap looked and measured correctly for ⅝”, but I drilled both sizes in a scrap piece of wood just to make sure. I didn’t have to drill holes in my door since I already had to with the previous Yale electronic lock I reviewed. Conclusion: I think the Yale Smart Lock is built tough and looks great. I think it would be just about perfect if they had the numbers printed on the screen and the app worked faster. I think the lack of printed numbers is a style design but not a well thought out one. That cost it a star, again. Recommended.

Yale - Assure Lock 2 Smart Lock Touch Key-Free Keypad with Bluetooth The Assure Lock 2 Smart Lock is a basic Smart lock with Bluetooth integration. It is capable of having a Z-Wave or WiFi module installed easily, but at an additional price. It is powered by 4 AA batteries (included). The inside is a rotating thumbturn, an Indicator light, and a passage button. Externally, there is a keypad with an indicator light, a fingerprint panel, and an emergency 9-volt battery backup connector. This is intended to replace a deadbolt or add one to an exterior door. The manual comes with a tear-out full-size fit checker and an installation FACE BORE template for adding or adjusting holes for the lock. It also comes with an optional magnet for installation, which can be used as a ‘door sense’ to detect whether the door is open or closed. When appropriately installed, the mechanism is strong and sturdy with a smooth-flowing bolt that ensures limited battery drainage. The outside lock can be accessed with fingerprints, a pin number, or a Bluetooth app to lock and unlock the deadbolt. Replacing the standard deadbolt with the Yale Smart lock was easy and only took several minutes. I didn’t install the magnet, despite having both an embedded option and a surface installation option. The Yale Access App is required to set up the lock and to add accounts, access codes, and fingerprints. The App is simple, and I feel it is too simple in terms of versatility. I was surprised that one couldn’t do a complete setup with the Lock’s keypad as the interface, as I have done with other Smart Locks. Since the App communicates with Bluetooth (even if using the lock with different modules) one has to be within the Bluetooth range of the Lock when setting everything up. My initial setup with the App was painful. The app wanted to check and possibly install an updated firmware, but couldn’t communicate with the lock. Stating one could skip this and move on I did so. At this stage, it attempted to establish Bluetooth connectivity between the lock and the app, but the connection continued to fail. I tried it on three separate devices, and they all failed to communicate with the lock's Bluetooth. I tried the autofix and all the recommended troubleshooting and still no communication with the Bluetooth on the Lock. Eventually, I tried a reset to factory specs and a reinstall. This time it didn’t look for a firmware update and installed correctly. Of course, it was 117 °F that day, and I needed to have the door open slightly to the outside while I worked, which didn’t make things any easier. After establishing communication and app settings, things became pretty easy. I was disappointed that only one access code or fingerprint could be assigned per User. I had to set up multiple accounts for the same user to ensure I had backup fingerprints. Additional settings are available in the app – Increasing the wrong code limit, changing the shutdown timing, choosing between vacation mode and Normal operation mode, one-touch locking (On or Off), Door-Sense setting for auto-locking or disabling, access alerts, setting up verified access, and hiding access codes in the App. The Lock is good-looking, and once the app is set up, the unit is working well. Without adding a module, the app is limited to Bluetooth range, but for my use on our back door, it is all I require. I like the smoothness of the bolt locking mechanism. Access codes and fingerprint access had no problems. The App and the connectivity could use some work but after getting past the problems I had during setup the lock has worked well

Yale is well known for their locks. They now offer replacement locks to make your house “smarter” and your life more convenient. I’d helped my sister install one of their deadbolt replacements at her condo and it went well. When I started to get more into outdoor exercise earlier this year, I decided it was time for me to get one as well. I wanted to avoid having to carry my keys when I go out so there’s nothing in my pockets. I went with Yale’s Assure 2 with fingerprint reader. It has physical buttons which light up when the lock is activated. It also has a finger print reader at the top. I can set a guest code for when we need a pet sitter, instead of leaving keys with them now. My wife, kids, and I can have a code as well as program a finger for one-touch operation. While not strictly necessary, this saves a few seconds when I’m ready to come in. I also don’t have to think about the code in the same way. The only drawback to using it is you can only program 1 finger. It worked well in the summer time, even with sweat on it. Hopefully, it will work as well when I go out in the cold. Installation was fairly straight forward. I unscrewed the old lock, including the deadbolt mechanism, then put the Yale lock pieces into the holes which were left behind. The outside lock portion is held in place in a similar way as the original lock, with screws mounted from the inside. This set does not have a key hole, making it impervious to manual lock picking. We have a manual lock on the back door, however, in case the batteries completely fail. Even in that case, Yale suggests leaving a 9V battery nearby as that can power the lock in an emergency. Connecting the lock to your network is as simple as scanning a QR code. Once connected, usage is easy. The only challenge I had was getting the firmware to update using my Android based phone. I ended up using my iPad to connect & configure the lock. I suspect it’s just growing pains as the lock is just on the market. There’s an option to auto lock the door behind you. This can be useful if your kids forget to lock when they leave or come in. The numbers are clear and respond to touches. No hard pressing needed. There’s audible feedback when the lock code is accepted. The lock can also be set to prevent too many unsuccessful attempts within a short period. Yale gives the option to use a plug in module to enable both WiiFi and Bluetooth on the lock, depending on how close you are to it. It comes with only Bluetooth support out of the box. The only external part is a small magnet that mounts to the door frame and allows the lock to know if you accidentally left the door open. Overall, this is a good lock with fairly high security and easy installation at home. The lack of a manual key as a backup may be a concern to some if this is your only door, but the overall convenience of not having to carry keys has been a nice benefit when I go on walks. I would definitely recommend it.

First off: I'll just say it up front...I'm disappointed it doesn't come Wi-Fi ready. This lock is bluetooth based so you can use it with your phone. The touch feature means it comes with a fingerprint reader. Installation: It was easy. I've removed and installed door locks a few times and this one was simple. There are also videos you can follow along, in case you get confused with the written instructions. There are measuring sheets for precise installation. The Yale app is easy to use and is compatible with many other apps. However, if you want to add Wi-Fi, you need to purchase a separate device which is not cheap. That was disappointing. You are able to register multiple users with a pin or fingerprint. The fingerprint reader works very well and is consistent. As long as you're in bluetooth range, you can use your phone. The frustrating part is that if you have a big house and you're out of range, you won't know the lock status. Maybe Yale tried to keep costs down by selling this lock without Wi-Fi, but I just think it should be a standard feature. All in all, better than a physical key. The only thing I can't speak for is how long the batteries will last. I still recommend it but if you're getting it in hopes of Wi-Fi connectivity, do the math first.

Yale began manufacturing bank locks in the 1840’s in Newport, New York, by Linus Yale Sr. Linus' son, Linus Yale Jr., joined the company & developed the pin tumbler lock, which transformed the lock industry. The latest introduction by Yale is the Assure Lock 2 Touch. It is a deadbolt, key-free smart entry door lock with Bluetooth connected keypad and fingerprint scanner for code entry. My favorite feature: you can literally unlock the door with your fingerprint. This takes less than 1/2 second recognition time & is 99% accurate. No more searching for your keys in your pocket or purse! This lock features multiple ways to unlock the door. In addition to fingerprint identification, it accepts keypad codes & virtual keys on the Yale Access App; it can even unlock automatically when the lock senses you are approaching! Yale Assure Lock 2 Touch can be programmed to automatically lock the door when you close it by DoorSense. This newest technology lets you know if your door is open or closed. CONCLUSION: Yale Assure Lock 2 Touch is super easy to use, with state-of-the-art technology, while maintaining ultimate security, for which Yale has staked their recommendation. It earns my highest recommendation.

I was an early adopter of Yale’s smart door lock since 2018, so I’m pretty familiar with the brand and the technology behind their locks. I couldn’t wait see what the newer Yale Assure Lock 2 Touch had to offer. Right off the bat, I’m loving the black suede finish of the lock. I’m impressed with the sleek and minimal design. I’m hoping the finish doesn’t tarnish too much over time as my other Yale lock did. Installing the Lock Installing the lock was a breeze and took me only about 20 minutes. I installed the lock on the front door. Keep in mind that my door is a standard door, so I was able to use all the accessories that came with the Yale Assure Lock 2 Touch Key-Free version. As soon as I setup the Yale Access app on the phone I was prompted to download a firmware update. Once the update was completed, I was ready to start performing my tests. This process was simple and straightforward. Features galore The huge list of features that the lock has to offer is what caught my attention. Having the ability to unlock the door by using my fingerprint was the main draw for me. I was able to assign my fingerprint pretty easily. As of the review, I was only able to assign one finger per profile setup. Using my finger to lock and unlock the door worked instantly. Bluetooth connection does take a couple of seconds to connect while waiting for the app to connect to the lock. Having the ability to assign key codes to multiple users is a huge plus for my family. I utilize the activity feed to monitor my kids going and coming. There is also a option to lock or unlock the door from the Yale app as well. Performance and battery life The biggest drawback for me was the lack of Wi-Fi initially. I had my previous smart lock connected to SmartThings, and Google Home since it was Wi-Fi enabled. Not having the ability to monitor my Yale door lock while away from home concerned me. However, Yale added the ability to add a smart module to allow Wi-Fi capability. This was a game changer for me. I was able to add the lock to SmartThings and Google Home. This also allowed me to setup custom routines and notifications. I installed the Yale DoorSense sensor as well. This is a neat feature that allows you to be informed when the door is opened or closed by using a sensor add-on. I needed to install a magnet next to my lock to get it to work properly. You don't have the ability to monitor the battery from the Yale Access app; however, I do have the ability within SmartThings. Really interested to see what type of battery performance I will see long-term. Thoughts The Yale Assure 2 Touch Fee has everything I was looking for in a door lock. Having the ability to use my fingerprint the unlock the door is a huge win. Having the fingerprints stored locally, as well as having the lock encrypted with the latest security standards will ease most privacy concerns. The most complicated issue was deciphering all the locks on the Yale’s website. So many options exist with the Yale Assure 2 lock. It may take some time searching the website for any troubleshooting since there are many versions of the Assure lock 2. I also love the fact that Yale made a module that allows the lock to connect online. This opened limitless possibilities when integrating into smart home platforms. The battery life is currently still being tested. Remaining Questions Will the lock withstand the elements outside? Will unit have battery drain as some older models has in the past? Only time will tell.

As the title says, I love to use these yale locks for my doors. From the front door to the garage, these locks are SUPER convenient. In the box is all you need to get the lock installed. Keypad, lock, hardware and instructions. I replaced my front entrance door lock with this Yale so I did not need to do any cutting or anything major. Simple swap. In total, it took me from start to finish roughly 15 minutes. This model is the Bluetooth one where it can connect to your app as long as you are in range. You DO have the option to add the optional Wi-Fi module so you can access the lock from anywhere you want. After calibrating the Smart Lock, I have had 0 issues with locking/unlocking via app and the sensor telling you if the door is closed/open was always correct. The fingerprint sensor worked 100% of the time (as of 1 straight weeks use). Buttons are responsive and have a nice clicky feeling and the keypad illumination is great for nighttime use. App is great. Once connected you can set your main code to enter/exit and also temporary guest codes. I love this feature a lot. I have found giving my family access while I am out of town super convenient when giving them their own access codes. What is also great is that with multiple locks you have in your account, you can have them all use the same codes to unlock the doors too.

Yale for as long as I can remember is a household name in the key/ lock business and the Assure Lock 2 does not disappoint. It is a solid digital lock with all the modern features: fingerprint recognition, app control and smart home integration. The build quality is great and seems durable enough to withstand daily use. Installation The installation process is quite typical just like installing any other digital lock. My only complaint is that the lock does not work with the existing strike plate on my door and there is only one strike plate size provided in the package. Installing the included strike plate on my door involves some drilling and sanding, which I do not particularly find convenient. If the strike plate does not fit properly into the mount on the door frame, drilling and sanding may be required during installation. This lock therefore may not be the easiest one out there to install. Features The lock is rated for outdoor use, which is great. It also has all the modern features out there including Bluetooth app control, fingerprint recognition and entry code system. User can create entry code for guests from the app. Conclusion This is a solid digital lock. However, installation may be a bit challenging if the strike plate does not immediately fit into the existing mount on the door frame.

This is the second Yale Lock I have owned.  The first did not have bluetooth built in so we had a BT Module in it, then used the WiFi bridge to connect it to the internet. This one does have bluetooth built in which is nice, but in 2025 I don't understand why they don't make every Yale Lock with Bluetooth AND WiFi built in.  I used my existing bridge with this one (unfortunately each Yale WiFi "bridge" can only be linked to ONE lock) and we moved our old Yale to our back door. Installing the lock is mostly straight forward especially if you've ever installed any type of smart lock in the past.  Everything is fairly standard. The part that can be a little complicated and certainly was for us is activating the lock, connecting it to the Yale app, and getting everything working properly.  That was a very frustrating process and not nearly as simple or straightforward as it could and should be.  Just getting the lock up and running and connected to the app took about 5 tries - my spouse got frustrated and quit so then I took over and finally got it to work.  Once it was connected, no issues - just that initial connection took a lot of time and patience.  Then connecting the lock to the WiFi Bridge (again, this is a separate purchase if you want to be able to control your lock from anywhere and cost around $50) was a whole nother process.  This is my only real complaint about the Yale lock - the connecting process was more work than it should be and having to buy additional things to get the full feature set. Once the lock is up and running, it works great!  We love the buttons on this one which are actual buttons versus our old one that was just a smooth surface with numbers behind it.  It's very easy to type in the code to lock or unlock the door.  The mechanism of the lock is nice and smooth and the motor in this lock definitely seems to be stronger than our older Yale lock. The fingerprint unlock is our favorite new feature! This works great and you can easily program multiple fingers into it so you can unlock it with either hand and different fingers.  It's a way quicker and easier method of unlocking than having to enter a code and so long as your finger placement is decent it's very quick to recognize and unlock. One of the features we loved the most about our old Yale Lock is the Auto-Unlock feature.  This uses your phone to know when you've left your neighborhood and returned and then when you get to your house the phone connects to the lock and unlocks it for you.  This lock has that feature as well and I don't think we'd ever buy a smart lock that doesn't have it because it's such an awesome thing to just have your door unlock itself when you arrive home.  It does occasionally glitch and not work, but that's when having the fingerprint as a second option makes this less of a big deal. The lock also has a auto-lock feature that you can set up (or not) that will sense when the door is closed and automatically lock it for you after a certain amount of time so that if you forget to lock it yourself, you're covered. Another great feature of the Yale Lock system is how easy it is to set up guest access.  You can easily assign them a temporary or permanent unlock code or if it's a close friend or family member who you always want to have access to your house, you can easily set them up with the fingerprint unlock.  Other than the initial connecting and setting up the lock, the app is overall very simple and intuitive and easy to use.  IF you add the WiFi Bridge to this so that it's connected to the internet you can check the status of the lock in the app and can also lock and unlock via the app.  Also, if you're connected to the internet you can install the Yale Skill on Alexa to check the status of your lock and lock your door by voice with an Echo device which can come in handy.   Overall, I'm very happy with the Yale lock.  I wish it had WiFi built in so I didn't have to use a bridge, but Yale does make locks that have WiFi built in - they are just very expensive. That's probably the one big issue with Yale - there are many competitors who make comparable locks that have most or all of the same features but are much better priced.  Any "smart" lock should just have WiFi and Bluetooth built in and I wish Yale only made such a lock and priced it competitively.   On the other hand, Yale is the one lock that I know for sure has the Auto-Unlock feature that works the way it does.  There may be others that have something similar, but many of the other ones I have looked at don't seem to handle it in the same way or work as effectively. That's the one feature that makes me willing to pay a little more to get the Yale lock besides the fact that Yale is a tried and true company in the deadbolt space and has made quality door locks for many, many years.

The install was simple, set up on the app was pretty easy. I bought this for the keypad functionality but honestly I use the fingerprint way more it's faster to get in and easier to use.

I’ve had a yell lock before. So I am very well aware of the brand. I believe they are a tri and Treu brand. That’s why I chose to go with the Yale assure lock this time. I am sad that I am not able to link it With the previous app. But downloading the yelled app was very easy. I was able to uninstall the old lock and install the new lock and under 30 minutes. It wasn’t lining up perfectly because I had to remove the extra round piece on the outer keypad to insert through the existing door hole. But once I figured that out the insulation was fairly easy. I really really really like the fingerprint entry and the textile numbering keys makes it easy not to accidentally hit a different number when trying to put in the code to unlock the door. I truly believe this was an upgrade from my last yelled deadbolt so other than the color which I really like black, but my door is white I have no complaints and I plan to have this one for at least three or four years like my previous one. Overall this is a great Deadbolt.

This is the second unit I have bought, this time for my rear door. What I love about this: a) Door Sense to detect if the door is open or closed b) Door Sense auto-locks the door c) Key pad can be placed at any location of choice d) I am able to use the other end of the deadblot which matches with my handle! Cons: a) The finger print sesor is extremely slow b) The app is very basic and visually not very pleasing

I just installed this lock. So far I like it but I was under the impression that I would be able to control it when I am away from home. If you want a lock that allows you to lock and unlock it while away from home, this isn’t the one to get. I needed that capability in case my kids forget their code or if maintenance was to come in I could set a temp code while away. Other than that it is a great starter smart lock.

This is the one to get, works perfectly, I've had 4 of them at different spots now, and they always work exactly as expected with no problems, they look great as well, can't be happier.

I am new to keyless entry locks. Con: The first one I got recently only lasted a few months before it broke. It was covered by Best Buy so I got a replacement. I feel like this one is louder. We have a small house and the bedrooms are right near the front door. I turned off one noise and chose the quietest but it is still pretty loud and almost think the replacement one I just got is louder. I have not seen that I can set up a different code for multiple people. Maybe I am missing this but it is a con for me if I cannot. If I want one person to not have the code I have to change the code for everyone Pro: I love not having to remember my keys. I like having a code for other people so I do not have to set up fingerprints for everyone.

Works great! Finger print as well as code. Easy to install following directions

Life became so much easier! So easy to ease so easy to use!