Thermaltake - Riing 120mm Case Cooling Fan Kit with RGB lighting
- Key Specs
- Airflow Volume: 60.6 cubic feet per minute
- Cooling System: Air (A computer's CPU generates heat while operating and requires a cooling system to keep internal components functioning properly. Air cooling uses fans to draw in cool air and exhaust hot air, while liquid cooling uses coolant-filled tubes and water blocks to regulate internal temperature more efficiently.)
- Fan Size: 120 millimeters
- Fan Speed: 1500 revolutions per minute
- Noise Level: 26.4 decibels adjusted
- Number of Fans Included: 3
- Lighting Type: RGB
- Product Height: 4.7 millimeters (The out of box height of the item. Height is measured as the vertical distance from the bottom of the item to the top as it would be primarily used or placed.)
- Product Width: 4.7 millimeters (The out of box width of the item. Width is measured as the horizontal distance from one side of the item to the other as it would be primarily used or placed.)
- Processor Socket: Socket (Type of pin configuration that connects a CPU to a computer’s motherboard.)
- General
- Product Name: Riing 120mm Case Cooling Fan Kit with RGB lighting
- Brand: Thermaltake
- Model Number: CL-F042-PL12SW-C
- Cooling
- Airflow Volume: 60.6 cubic feet per minute
- Cooling Fan Type: Case
- Cooling System: Air (A computer's CPU generates heat while operating and requires a cooling system to keep internal components functioning properly. Air cooling uses fans to draw in cool air and exhaust hot air, while liquid cooling uses coolant-filled tubes and water blocks to regulate internal temperature more efficiently.)
- Fan Size: 120 millimeters
- Fan Speed: 1500 revolutions per minute
- Noise Level: 26.4 decibels adjusted
- Number of Fans Included: 3
- Fan Life Expectation: 40000 hours
- Bearing Type: Hydraulic bearing
- Fan/Cooling System Connector: 4 Pin (The configuration of the connector as it connects a computer component to a fan or cooling system.)
- Features
- Lighting Type: RGB
- Customizable Lighting: true
- Power
- Power Consumption: 2.52 watts
- 12-Volt Rated: true
- Dimensions
- Product Height: 4.7 millimeters (The out of box height of the item. Height is measured as the vertical distance from the bottom of the item to the top as it would be primarily used or placed.)
- Product Width: 4.7 millimeters (The out of box width of the item. Width is measured as the horizontal distance from one side of the item to the other as it would be primarily used or placed.)
- Product Length: 1 millimeters (The out of box length of the item. Length is measured as the longest dimension of the item.)
- Product Weight: 5.68 ounces (The out of box weight of the item.)
- Compatibility
- Processor Socket: Socket (Type of pin configuration that connects a CPU to a computer’s motherboard.)
- Other
- UPC: 841163064924
Supply your computer system with maximum cooling efficiency by using these Thermaltake Riing 120mm cooling fans. The hydraulic bearings provide silent operation, and the anti-vibration mounting system keeps the chassis stable. This 3-pack of Thermaltake Riing fans comes with a convenient controller for adjusting the fan speed and setting the LED mode.
- Compatible with most cases: For wide-ranging use.
- 120mm cooling fans: To transfer heat from components.
- Hydraulic bearing design: Ensures long-lasting operation.
- 22.14-60.6 cfm airflow volume: Ensures efficient cooling.
- 18.5-26.4dBA noise level: Ensures quiet operation.
- 400-1500 rpm operating speed: For fast cooling.
Whats Included
- Thermaltake Riing 120mm Case Cooling Fan Kit with RGB lighting
A: The connector on the fans will unfortunately only connect to the provided control box that comes with the fans. However the provided control box has a standard 4-pin connector you find on all motherboards and fan controllers. On the motherboard just look for something that says SYS FAN, or OPT FAN, these are usually keyed with a plastic tab by 3 of the 4 pins on the connector
A: Model numbers vary from store to store
A: These are proprietary 5 pin fans, the control box that comes with the 3 pack fans has a standard 4-pin connector, so fans to the control box, control box to the motherboard fan connector..
Q: Are these intake or exhaust fans, or are they both?
A: They're both. They're also static pressure which is great for radiators.
Q: Is there a generic connection I am trying looking for on my motherboard?
A: The fan kit comes with a fan controller. The fan controller connects to any standard 4-pin fan header on your motherboard. All the fans then connect back to the fan controller using a proprietary connector.
A: This has a nice hub that all the fans connect to and one cable that plugs into 3pin fan header on mobo. Very easy setup.
Q: Do these work with thermaltakes fan software?
A: They have their own fan controller, however you plug that into the motherboard and it can raise it lower the speed of the fans according to temperature
Q: Do these fans work with the thermaltake fan control software?
A: No these are the basic fans. Only work with the supplied hub.
