DS18 Audio - SELECT 10" Subwoofer, 220W RMS Single 4-Ohm
Reviews coming soon
About this product
The SLC10S is a 10" car subwoofer from the DS18 SELECT series. It handles 220 watts RMS and uses a single voice coil at 4 ohms per coil, which keeps wiring simple with most monoblock amplifiers. Peak power handling is 440 watts. Mounting requires a 9.13" cutout diameter and 4.45" of mounting depth, so confirm your enclosure before installing. Pair it with a matching monoblock amplifier and a properly tuned enclosure to get the most low-frequency output.
Woofer Size
10"220W RMS / 440W Peak Power Handling
Rated at 220 watts RMS and 440 watts peak. Behind that rating: 2" voice coil on an aluminum former wound with CCAW wire and a 45 oz ferrite motor. That is what lets a 10" cone move this much air without losing control.
Single 4-Ohm Voice Coil
The single voice coil design keeps wiring simple and works with most monoblock car amplifiers without impedance calculations.
88dB Sensitivity
A 88dB sensitivity rating turns amplifier watts into audible output efficiently, so you get more usable bass from the power you already have.
Fitment and Recommended Enclosure
This 10" subwoofer requires a 9.13" cutout diameter and 4.45" of mounting depth. DS18 recommends a sealed enclosure of 0.5 cu ft and a ported enclosure of 1.25 cu ft tuned to 30Hz. Check these numbers against your enclosure before ordering: enclosure volume and tuning change the low-frequency response as much as the driver does.
- RMS Power220 wattsPeak Power Handling440 wattsImpedance4 ohmsSensitivity88 decibelsDual Voice CoilsNoWoofer Size10"
Reviews
This product doesn't have any reviews yet.
Compare similar products
The SLC10S is a 10" car subwoofer from the DS18 SELECT series. It handles 220 watts RMS and uses a single voice coil at 4 ohms per coil, which keeps wiring simple with most monoblock amplifiers. Peak power handling is 440 watts. Mounting requires a 9.13" cutout diameter and 4.45" of mounting depth, so confirm your enclosure before installing. Pair it with a matching monoblock amplifier and a properly tuned enclosure to get the most low-frequency output.
The CompR 10" Subwoofer is a 4-Ohm dual voice coil design, making it easy to get the most out of your amp. An advanced suspension and heat management system helps to keep the bass powerful, deep and consistent. Revolutionary Solokon technology joins the cone to the vented back brace, creating a single integrated unit that both cools the motor and eliminates distortion. To make our subs even more reliable KICKER engineers developed Forced Air Cooling to help our subs run 25% cooler than before.
MB Quart Discus Subwoofer: Feel the thunderous impact of low-end audio as you crank up the bass with a 10" thermal-formed polypropylene cone that delivers quality sound at high volume levels. The vented aluminum former promotes cool performance.
Immerse yourself in meaningful bass with this Kicker CompC subwoofer. The 10-inch circumference slides in easily with your speaker set up, and the signature yellow stitching catches attention. The single voice coil construction and spiraled tinsel leads deliver every bit of bass, and this Kicker CompC subwoofer has spring-loaded speaker terminals for easy connection. Geek Squad Installation Recommended Visit your local Best Buy store for more information.
| Pros for DS18 Audio - SELECT 10" Subwoofer, 220W RMS Single 4-Ohm | |||
|---|---|---|---|
| There were no pros for this product— | Sound Quality | There were no pros for this product— | Sound Quality |
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.
More to consider
Keep exploring
$548.00The price was $698.00
