DS18 Audio - ZXI 10" High Excursion Subwoofer with Quad Stacked Magnet, 800W RMS Dual 4-Ohm
Reviews coming soon
About this product
The ZXI10.4D is a 10" car subwoofer from the DS18 ZXI series. It handles 800 watts RMS and uses dual voice coils at 4 ohms per coil, so you can wire multiple subwoofers to the final impedance your amplifier is stable at. Peak power handling is 1600 watts. The high-excursion motor and suspension let the cone travel farther for deeper low-frequency output. The motor uses a quad stacked magnet assembly. Mounting requires a 9.36" cutout diameter and 6.91" of mounting depth, so confirm your enclosure before installing. Pair it with a matching monoblock amplifier and a properly tuned enclosure to get the most low-frequency output.
Woofer Size
10"Features
800W RMS / 1600W Peak Power Handling
Rated at 800 watts RMS and 1600 watts peak. Behind that rating: 2.5" voice coil on a black aluminum former wound with CCAW wire and a 196 oz ferrite motor. That is what lets a 10" cone move this much air without losing control.
Dual 4-Ohm Voice Coil
Dual voice coils let you wire multiple subwoofers in series or parallel to reach the final impedance your amplifier is stable at, which gives you room to grow the system later.
High-Excursion Motor for Deep Bass
The high-excursion motor and suspension allow the cone to travel farther than a conventional subwoofer, which moves more air and produces the low frequencies you feel rather than just hear. Give it a properly tuned sealed or ported enclosure to take advantage of it.
Fitment and Recommended Enclosure
This 10" subwoofer requires a 9.36" cutout diameter and 6.91" of mounting depth. DS18 recommends a sealed enclosure of 0.5 cu ft and a ported enclosure of 1.25 cu ft tuned to 30Hz. Check these numbers against your enclosure before ordering: enclosure volume and tuning change the low-frequency response as much as the driver does.
Quad Stacked Magnet
A quad stacked magnet assembly increases motor force, which improves cone control at high power and helps the subwoofer stay accurate instead of getting loose and boomy when driven hard.
Specifications
- RMS Power800 wattsPeak Power Handling1600 wattsImpedance4 ohmsSensitivity86 decibelsDual Voice CoilsYesWoofer Size10"
Reviews
This product doesn't have any reviews yet.
Compare similar products
The ZXI10.4D is a 10" car subwoofer from the DS18 ZXI series. It handles 800 watts RMS and uses dual voice coils at 4 ohms per coil, so you can wire multiple subwoofers to the final impedance your amplifier is stable at. Peak power handling is 1600 watts. The high-excursion motor and suspension let the cone travel farther for deeper low-frequency output. The motor uses a quad stacked magnet assembly. Mounting requires a 9.36" cutout diameter and 6.91" of mounting depth, so confirm your enclosure before installing. Pair it with a matching monoblock amplifier and a properly tuned enclosure to get the most low-frequency output.
Explore new audio depths with this 10-inch Kicker Solo-Baric subwoofer. Its unique square design can be installed sealed or ported, while its 2-ohm dual voice coils offer flexible wiring options and strong output. This Kicker Solo-Baric subwoofer has a 600W RMS power rating and sensitivity of 86.8dB to produce a steady, booming bass. Geek Squad Installation Recommended Visit your local Best Buy store for more information.
The ZR10.2D is a 10" car subwoofer from the DS18 ZR series. It handles 700 watts RMS and uses dual voice coils at 2 ohms per coil, so you can wire multiple subwoofers to the final impedance your amplifier is stable at. Peak power handling is 1400 watts. Mounting requires a 9.0" cutout diameter and 6.0" of mounting depth, so confirm your enclosure before installing. Pair it with a matching monoblock amplifier and a properly tuned enclosure to get the most low-frequency output.
The GEN-XX10.4DHE is a 10" car subwoofer from the DS18 GEN-XX series. It handles 500 watts RMS and uses dual voice coils at 4 ohms per coil, so you can wire multiple subwoofers to the final impedance your amplifier is stable at. Peak power handling is 1000 watts. The high-excursion motor and suspension let the cone travel farther for deeper low-frequency output. The motor uses a double stacked magnet assembly. Mounting requires a 9.14" cutout diameter and 6.14" of mounting depth, so confirm your enclosure before installing. Pair it with a matching monoblock amplifier and a properly tuned enclosure to get the most low-frequency output.
| Pros for DS18 Audio - ZXI 10" High Excursion Subwoofer with Quad Stacked Magnet, 800W RMS Dual 4-Ohm | |||
|---|---|---|---|
| There were no pros for this product— | Sound Quality | There were no pros for this product— | There were no pros for this product— |
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.
Customers often buy these together
More to consider
Enjoy your ride Sponsored
Keep exploring
$473.44The price was $499.95
$224.64The price was $228.25
$75.36The price was $77.16
$143.43The price was $144.51
$76.47The price was $81.12
