Q2 Combo Enclosed CoreXY FDM 3D Printer with QIDI Box Multi-Color System, Heated Chamber, 600mm/s, 270x270x256mm - Gray
Reviews coming soon
About this product
The QIDI Q2 Combo pairs the fully enclosed Q2 CoreXY printer with the QIDI Box multi-material system for multi-color printing straight out of the box. Its 270 x 270 x 256 mm heated chamber works with a 370 degrees C bimetal hotend to print PLA, PETG, ABS, ASA, TPU, PA, PC, PPS-CF, and carbon fiber composites with minimal warping, while the bundled QIDI Box dries filament at 65 degrees C and switches materials automatically for multi-color models and soluble support structures. Load-cell auto-leveling delivers true zero-offset first layers, the 1080P AI camera detects print failures automatically, and the 3-in-1 filtration system (G3 pre-filter, H12 HEPA, activated carbon) captures 99.5 percent of airborne particles for safe indoor operation. MET certified to US and Canadian safety standards.
Features
High-Speed CoreXY Motion System
Prints at up to 600mm/s with 20,000mm/s2 acceleration. The CoreXY motion system, X-axis linear guide rail, custom 1.5GT belt, and dual independent Z lead screws keep the toolhead stable at high speeds, so you get smooth surfaces and precise details without long print times.
370C Hotend and 65C Heated Chamber
The bimetal hotend with ceramic throat reaches 370 degrees C and the second-generation active PTC chamber heater reaches 65 degrees C, so ABS, ASA, PA, PC, PPS-CF, and carbon fiber composites print with minimal warping. The 120 degrees C heated bed pairs with a dual-sided textured PEI plate for strong first-layer adhesion.
Hands-Free Auto Leveling
A load cell sensor built into the hotend turns the nozzle itself into the leveling probe, delivering true zero-offset first layers with no manual calibration. Ships fully assembled and ready to print in minutes, with a 4.3-inch color touchscreen for simple operation.
3-in-1 Air Filtration, MET Certified
A G3 pre-filter, H12 HEPA filter, and coconut shell activated carbon filter work together to capture 99.5 percent of airborne particles and reduce odors, making it safe to print ABS and other fume-producing materials at home or in the classroom. The Q2 is certified to US and Canadian MET safety standards.
QIDI BOX Included For Multi-Color Printing
The bundled QIDI Box holds four spools, dries filament at 65 degrees C while printing, and switches materials automatically for multi-color models and soluble support structures. Additional units can be chained for up to 16 colors and are sold separately. Monitor every job from the 1080P AI camera over 2.4G/5G Wi-Fi, Ethernet, or USB.
Specifications
- NetworkingWireless, WiredPrinter Type3D PrinterLeveling CapabilityFully automatic with load cell sensor
Reviews
This product doesn't have any reviews yet.
Compare similar products
The QIDI Q2 Combo pairs the fully enclosed Q2 CoreXY printer with the QIDI Box multi-material system for multi-color printing straight out of the box. Its 270 x 270 x 256 mm heated chamber works with a 370 degrees C bimetal hotend to print PLA, PETG, ABS, ASA, TPU, PA, PC, PPS-CF, and carbon fiber composites with minimal warping, while the bundled QIDI Box dries filament at 65 degrees C and switches materials automatically for multi-color models and soluble support structures. Load-cell auto-leveling delivers true zero-offset first layers, the 1080P AI camera detects print failures automatically, and the 3-in-1 filtration system (G3 pre-filter, H12 HEPA, activated carbon) captures 99.5 percent of airborne particles for safe indoor operation. MET certified to US and Canadian safety standards.
The QIDI Plus5 Combo pairs the enclosed CoreXY Plus5 printer with the QIDI Box multi-material system for true multi-color and multi-material printing out of the box. The printer's 320 x 320 x 300 mm build volume, third-generation independent chamber heater (550W, up to 65 degrees C), and 370 degrees C bimetal hotend handle ABS, ASA, PA, PC, PPS-CF, and carbon fiber composites with minimal warping. The included QIDI Box loads four spools, dries filament at up to 65 degrees C while printing, and switches materials automatically for multi-color models and dissolvable support structures; chain up to four units for 16 colors. Hardened steel dual gears feed abrasive composites reliably, and RFID recognition, run-out, tangle, and clog detection keep long prints unattended. A load cell sensor in the hotend delivers hands-free automatic leveling, the 1080P AI camera detects print failures, and the 3-in-1 filter (G3 pre-filter, H12 HEPA, coconut shell activated carbon) captures 99.5 percent of particles for safe indoor use. Dual-band Wi-Fi, Ethernet, and USB, with full QIDI Studio, OrcaSlicer, and PrusaSlicer support.
The QIDI Q2 is a fully enclosed CoreXY 3D printer built for makers, engineers, and classrooms. Its 270 x 270 x 256 mm build volume handles large single-piece models, while the second-generation active PTC chamber heating (up to 65 degrees C) and 370 degrees C bimetal hotend support PLA, PETG, ABS, ASA, TPU, PA, PC, and carbon fiber composites with minimal warping. A load-cell auto-leveling system delivers zero-offset first layers out of the box, and the 3-in-1 air filtration (G3 pre-filter, H12 HEPA, and activated carbon) captures 99.5 percent of airborne particles for safe indoor operation. MET certified to US and Canadian safety standards, with 1080P AI camera monitoring and 2.4G/5G Wi-Fi, Ethernet, and USB connectivity.
The P2S evolves our best-selling P Series, redefining mid-range 3D printing with flagship-grade performance at a practical price. Reengineered from the ground up, it features the DynaSense extruder, Active Airflow, and eddy current flow calibration for professional results with zero manual tuning.
| Pros for Q2 Combo Enclosed CoreXY FDM 3D Printer with QIDI Box Multi-Color System, Heated Chamber, 600mm/s, 270x270x256mm - Gray | |||
|---|---|---|---|
| There were no pros for this product— | There were no pros for this product— | There were no pros for this product— | Overall Performance, Ease of Use, Print Quality, Setup, Noise Level |
| Cons for Q2 Combo Enclosed CoreXY FDM 3D Printer with QIDI Box Multi-Color System, Heated Chamber, 600mm/s, 270x270x256mm - Gray | |||
| There were no cons for this product— | There were no cons for this product— | There were no cons for this product— | Extruder Performance, Included Accessories, Maintenance, Motherboard |
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.
Customers often buy these together
More to consider
Explore, Play, Collect Sponsored
Keep exploring
$359.00The price was $469.00
$1,110.14The price was $1,299.00
$459.00The price was $599.00
