- Key Specs
- Speaker Type: In-Ceiling
- RMS Power: 50 watts (The maximum amount of continuous power the device is able to handle.)
- General
- Product Name: 6-1/2" In-Ceiling Speakers (Pair)
- Model Number: NS-C6500-A
- Audio
- Speaker Type: In-Ceiling
- RMS Power: 50 watts (The maximum amount of continuous power the device is able to handle.)
- Peak Power Handling: 100 watts (The maximum amount of power an electronic device, like a speaker, can handle without damage. This refers to short bursts of power, while root mean square (RMS) power handling indicates the amount of continuous power a device can sustain. Higher levels of distortion can also occur at peak power levels when the device is powered beyond its recommended usage.)
- Impedance: 8 ohms (Describes the resistance of an electric signal throughout the system. Devices with low impedance require less power to deliver optimal signals but are more at risk for damage from overloading. Higher impedance requires more power but is more protected from overload damage.)
- Minimum Frequency Response: 50 hertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The minimum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Maximum Frequency Response: 20 kilohertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The maximum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Sensitivity: 87 decibels
- Tweeter Size: 0.075 inches
- Woofer Size: 6.5 inches
- Dimensions
- Product Height: 9.00 inches (The out of box height of the item. Height is measured as the vertical distance from the bottom of the item to the top as it would be primarily used or placed.)
- Product Width: 8.9 inches (The out of box width of the item. Width is measured as the horizontal distance from one side of the item to the other as it would be primarily used or placed.)
- Product Depth: 3.9 inches (The out of box depth of the item. Depth is measured as the distance from the front of the item to the back as it would be primarily used or placed.)
- Product Weight: 2.73 pounds (The out of box weight of the item.)
- Material
- Tweeter Material: Aluminum
- Woofer Material: Aluminum
- Included
- Speaker Wire Included: false
- Certifications Listings & Approvals
- ENERGY STAR Certified: false (Devices carrying the ENERGY STAR service mark, such as computer products and peripherals, kitchen appliances, and other products, generally use 20% to 30% less energy than required by federal standards.)
- Warranty
- Manufacturer's Warranty - Parts: 1 year
- Manufacturer's Warranty - Labor: 1 year
- Other
- UPC: 600603110535
Fill out your home theater setup with these in-ceiling speakers that blast up to 100 watts of clear, rich sound.
Q: what hardware is required for mounting the 61/2" NS-C6500 ceiling speakers
A: You need a knife to cut the ceiling tile (on a drop ceiling). Drywall would probably require a little saw. You'll need a screw driver to tighten the brackets (phillips). You might want a wire stripper. You might need a drill depending on what holes you need for your wires. You will also need speaker wire.
A: I use a dental pick. Dentck makes one that you can get at any phamarcy that works perfectly. Insert the pick thru the mesh speaker cover and gently pull towards you and the cover will come off.
Q: I need the template cutout for the NS-C6500 Ceiling speakers
A: The cut-out template for the NS-C6500 is not a part available for order. The diameter of the cutout is 7.68" (195mm).
Q: what is meant by the term two-way speaker?
A: undefined
A: Do not remove the cloth. It dampens the sound and reduces the speaker shadow showing through the grill.
Q: Are these "stereo input" speakers?
A: These are installed to a jukebox (200 watts) which has two pair of your typical speaker wires. I guess the key thing is making sure you fall into the power recommendations for the speakers.
Q: Can these be wall-mounted? Also, are they paintable?
A: Yes but your wall would have to be thicker than a standard 2x4 wall...2x6 would probably work but since mine are already installed I can't measure the exact depth. The covers are paintable.
