Arcam - SA10 170W 2.0-Ch. Integrated Amplifier - Gray
- Key Specs
- Continuous Watts x Channel @ Ohms: 50W x 2 x 8 ohms; 85W x 2 x 4 ohms
- Number of Channels: 2 (The number of discrete channels of sound output. This can be a single number or multiple numbers separated by decimal(s). The first number is the primary, horizontally directed audio channels. The number after the first decimal, if applicable, is the number of subwoofer outputs or channels. The number after the second decimal, if applicable, is the number of height or atmospheric channels designed to immerse the listener by producing overhead sound effects.)
- Audio Only Inputs: 1 x Phono, 1 x Optical digital audio, 1 x Coaxial digital audio
- Preamp Outputs: true
- General
- Product Name: SA10 170W 2.0-Ch. Integrated Amplifier
- Brand: Arcam
- Model Number: SA10
- Color: Gray
- Audio
- Continuous Watts x Channel @ Ohms: 50W x 2 x 8 ohms; 85W x 2 x 4 ohms
- Total Power Handling: 170 watts (How much amplifier (amplified) power (wattage) that can be handled before damaging the product.)
- Number of Channels: 2 (The number of discrete channels of sound output. This can be a single number or multiple numbers separated by decimal(s). The first number is the primary, horizontally directed audio channels. The number after the first decimal, if applicable, is the number of subwoofer outputs or channels. The number after the second decimal, if applicable, is the number of height or atmospheric channels designed to immerse the listener by producing overhead sound effects.)
- Minimum Frequency Response: 20 hertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The minimum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Total Harmonic Distortion: 0.003 percent (Measurement of the harmonic sound distortion. The lower the percentage, the cleaner the sound.)
- Maximum Frequency Response: 20 kilohertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The maximum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Amplifier Class: AB (An amplifier's mode of operation, specifically the conditions in which its electrical current flows for the duration of an audio signal, determines its class. Each class has its strengths and weaknesses when it comes to power efficiency, levels of crossover distortion, and overall sound quality.)
- Amplifier Type: Integrated amplifiers
- Inputs
- Audio Only Inputs: 1 x Phono, 1 x Optical digital audio, 1 x Coaxial digital audio
- Speaker-Level Inputs: true (Also referred to as high-level inputs. Enables the amplifier to receive a sound signal from another device that does not have RCA, or low-level, inputs.)
- Line-Level Inputs: true (Also referred to as low-level inputs. Enables the amplifier to receive a sound signal from another device via RCA cables.)
- Outputs
- Preamp Outputs: true
- Features
- Bridgeable: true (Bridging an amplifier increases the power it supplies to the speaker(s).)
- Dimensions
- Product Height: 3.43 inches (The out of box height of the item. Height is measured as the vertical distance from the bottom of the item to the top as it would be primarily used or placed.)
- Product Width: 17.1 inches (The out of box width of the item. Width is measured as the horizontal distance from one side of the item to the other as it would be primarily used or placed.)
- Product Depth: 12.2 inches (The out of box depth of the item. Depth is measured as the distance from the front of the item to the back as it would be primarily used or placed.)
- Product Weight: 18.5 pounds (The out of box weight of the item.)
- Other
- UPC: 028292282669
Make music clean, crisp and booming with this Arcam integrated amplifier. The digital display lets you read information clearly at a glance, while the 3.5mm audio jacks let you connect speakers or headphones easily. This Arcam integrated amplifier uses 50W of power for each channel to give audio a rich, full sound.
- Up to 170W of total power: Power rating of 50W x 2 at 8 ohms, 85W x 2 at 4 ohms, two channels driven for robust audio.
- 4- or 8-ohm impedance: Efficiently conducts power.
- Built-in 32-bit DAC: Ensures the full aural picture of whatever the artist intended.
- 0.003% total harmonic distortion and noise: Delivers clear audio.
- Automatic standby: Can be configured up to four hours, in half-hour steps of inactivity, to minimize power consumption.
- Network connection: You can easily control and monitor it remotely.
Whats Included
- Arcam HDA 170W 2.0-Ch. Integrated Amplifier
- Remote with batteries
- Mains lead
- Owner's manual
Q: Can I control this amplifier remotely?
A: Yes, you can easily control and monitor the amplifier remotely thanks to its network connection feature.
Q: What is the impedance compatibility of this amplifier?
A: This amplifier is compatible with both 4-ohm and 8-ohm impedance speakers.
Q: What is the total harmonic distortion and noise rating of this amplifier?
A: This amplifier has a total harmonic distortion and noise rating of 0.003%, which helps deliver clear audio.
Q: Does this amplifier have a built-in DAC?
A: Yes, it has a built-in 32-bit DAC to ensure high-quality audio reproduction.
Q: How much power does this Arcam integrated amplifier use per channel?
A: This Arcam integrated amplifier uses 50W of power for each of the two channels.
Q: is this integrated amp 170wpc or 85wpc?
A: it's 85 watts per channel or 170 watts total into 4 ohms. please note that they are 50 watts per channel into 8 ohms.
Q: Greetings does this unit have Dirac room correction?
A: undefined
