Legrand - In-Wall Low-Voltage Cable Access Plate with Bracket, Pair - White

Name: Legrand - In-Wall Low-Voltage Cable Access Plate with Bracket, Pair - White
Brand: Legrand
SKU: 5119304
Rating: 4.3 (383 reviews)

Model: HT2004-WH-V1

SKU: 5119304

This item is no longer available in new condition. See similar items below

General
- Product Name: In-Wall Low-Voltage Cable Access Plate with Bracket, Pair
- Brand: Legrand
- Quantity: 2
- Compatibility: Supports HDMI, DVI, USB, coax, and RJ45 cables
- Model Number: HT2004-WH-V1
- Color: White
Other
- Concealer Type: Channel
- Number Of Cord Compartments: 1
- Material: Plastic
- UPC: 804428032496

Legrand OnQ products include a complete line of innovative home networking, intercom, camera, audio, and lighting control systems designed to seamlessly integrate into any living space or decor. This cable brush strap kit is a great solution to hide cables in the wall. Use with any low voltage cables to clean up the mess of cords on the wall.

Hides low voltage cables behind the wall: Creates a clean, professional installation
Fits in to any standard decorator opening: No need to cut special sized openings
Quick and easy installation: DIY Installation
Compatible with any type of low voltage cables: Including HDMI, RCA, telephone, networking, fiber optical, speaker wires, and coax cables
Includes mounting accessories: No additional low voltage plate is needed
Back of plate features cable catcher: Cables stay in place and don't fall back into the wall

Whats Included

Legrand In Wall Cable Access Plate

Product Manuals

Installation Guide

Q: I have 3 HDMI cables and 2 ethernet cables. Will they all fit?

A: Yes, they will all fit. I have the same cable configuration you have , and they all fit with a little room to spare. I would suggest pulling them thru the bristles one at a time, line them up , then screw the bracket to the wall.

Q: Can you run the tv power cord down through ?

A: Yes but it could be tricky depending on where your power, HDMI and cable outlets are mounted and how long your power, HDMI and cable cords/cables are. If you mount behind a stereo or entertainment center it is merely a function of length of cables. I think the wall plates allow you four slots to run cables through so they are secure.

Q: Can this be attached to a normal sized in the wall electrical box?

A: Yes, these cable access plates can be installed using the included clips, any standard low-voltage bracket, or any standard electrical box - whichever option works best for you. Hope this helps!

Q: What are the dimensions between the screws?

A: These brackets are box mounted with a screw distance of 3-9/32". Hope this helps!

Q: What is the maximum wall thickness for mounting to the wall? I have 1/2" sheetrock and 1/2" beadboard to go through.

A: The included clips will only work with 1/2" drywall. However, you could opt to not use those clips and purchase a separate low voltage bracket to attach the brush plates to.

Q: Does this come in lt almond

A: Not sure but I bought mine at Best Buy as you know, so just ask them or go on line and do a search. I don’t recall seeing almond and mine did not matter because they are behind my TV and my entertainment console.

Q: Does this come in pair?

A: Yes, this cable access brush plate comes as a pair.

Customers are saying

Customers are enthusiastic about the In-Wall Low-Voltage Cable Access Plate's ease of use, cable management capabilities, and clean aesthetic. Many appreciate the straightforward installation and the high-quality look and feel of the product. However, some customers found the instructions inadequate and the provided template less than helpful in achieving the correct hole size for installation. The size of the opening may present challenges depending on the cable and plug being used.

This summary was generated by AI based on customer reviews.

Customer Images

The vast majority of our reviews come from verified purchases. Reviews from customers may include My Best Buy members, employees, and Tech Insider Network members (as tagged). Select reviewers may receive discounted products, promotional considerations or entries into drawings for honest, helpful reviews.

Rated 4 out of 5 stars
You can MAKE it work
Mounting a Cable Pass-through box like this, with one box low enough to be out of sight and the other box behind the middle of the wall mounted TV to be out of sight, is a good way to hide the clutter of Power, HDMI, LAN and USB cables to make the wall mounted TV seem to float on air. The trick is to do it with minimum damage to the dry wall and flexibility to pass different cables between the upper and lower box when new technology and cable types require cable replacement over the years. A traditional home/office electrical outlet box is designed to clamp cables or wiring firmly which makes wiring upgrades difficult and beyond DYI. As you read other reviews of these Legrand - In Wall Cable Access Plates you'll see that this is not the perfect solution out-of-the-box (so to speak). The directions included are typical of today's shabby instruction books, which are made primarily to satisfy legal government warning requirements in six languages (DO NOT eat parts of this box because they MAY present a choking hazard and they WILL cause cancer if you eat them in California). There are two things you need to know before installing these Legrand - In Wall Cable Access Plates. First DO NOT make the hole in the wall as big as you would for a standard electrical outlet box. This Wall Cable Access plate does not mount INTO an electrical outlet box. It has its own dog-legs that grip the back of the dry wall, to clamp itself into place when you insert it and then tighten the top and bottom clamping screws. You can see from the picture I uploaded, that I initially ASSUMED it needed the same sized hole as a standard outlet box, so I traced the outline of a standard outlet box on the wall to make the hole-saw cut in the dry wall. If I had proceeded with making that large a hole, the Legrand - In Wall Cable Access Plates would have wobbled around loosely without side support. Instead, trace the hole to be the size of the actual Legrand - In Wall Cable Access Plate. In the uploaded picture, I left off the final trim plate that comes with the box to let you see the size of the opening in the wall. When the included trim plate is installed, the total instalation looks much nicer. Secondly, to make the passing of new cables between the upper and lower box possible, TRIM THE EXCESS MATERIAL off of the Legrand - In Wall Cable Access Plate. Best Buy only allows a total of two pictures with each review, so I hope you can see what needed trimming from the boxes, by looking at the single before-and-after picture of the trimmed parts. I know the makers of this box designed it so cables could not fall in from the top box, to the area inside the wall, if the cables were not connected to the TV. However, all of this extra flange material makes installation of the new cables for the first time too difficult, to make the extra material worth it. All this being said, this kind of modification I'm describing is only an option for the Do It Yourself Home Owner. From inside the wall, it looks pretty rough when you trim it like this. Someone paying a professional installer would not be happy if they saw it. Professional installers or renters would have to go with a much more expensive and hard to install set of boxes. My method described is to make the cheaper alternative work. I dropped one review Star because of the typical lousy instruction manual and the trimming necessary to get the box to work the way I wanted it to. However, once I got everything in place, I am perfectly happy with the look and performance.
Posted 7 years ago by Daddio
Rated 5 out of 5 stars
Do what they suppose to do
Easy to install. A little flimsy though, but you don't need them to be sturdy anyways. They look great once installed.
Posted 5 years ago by Chema
Rated 5 out of 5 stars
So simple and so clean!
These wall plates were super easy to install even though the instructions were kind of confusing to look at. The plates work exactly as intended and don’t feel as flimsy as some of the others I have tried in the past.
Posted 5 years ago by dudeatdesk7