Questions & Answers

Q: QuestionWill this work with a Technics SL-23A?

Asked 3 years ago by SL23A.

This question was asked about the related product: Audio-Technica - AT-VM95C/H Headshell/Cartridge Kit - Blue

• A:Answer It will but note that the stylus overhang for the AT-VM95C/H comes set at 15.5mm and the overhang specified in Technics SL23 documentation is 14mm so you may want to back the cartridge up 1.5mm.

  Answered 3 years ago by AudioTechnica

  
  Helpful (2)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this work with a Pioneer PL-100 turntable?

Asked 3 years ago by SoundEngineer.

This question was asked about the related product: Audio-Technica - AT-VM95C/H Headshell/Cartridge Kit - Blue

• A:Answer Yes, it will.

  Answered 3 years ago by AudioTechnica

  
  Helpful (2)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this fit on my AT-LP3 turntable as a "plug and play" to replace the AT91R cartridge and headshell that came with the turntable (and will is sound different)?. Thanks.

Asked 4 years ago by Anonymous.

This question was asked about the related product: Audio-Technica - Audio Technica AT-VM95E/H Headshell/Cartridge Kit - Green

• A:Answer No, it will not. You must use the ANGLED headshell that was provided with your AT-LP3 Turntable. Get the AT-VM95E Cartridge (cartridge only) instead.

  Answered 4 years ago by AudioTechnica

  
  Helpful (2)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWill this work with a Technics SL-D2?

Asked 4 years ago by EDAWG.

This question was asked about the related product: Audio-Technica - AT-VM95C/H Headshell/Cartridge Kit - Blue

• A:Answer Yes it will.

  Answered 4 years ago by AudioTechnica

  
  Helpful (2)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this fit a Denon DP DJ 100? Thank you

Asked 1 year ago by Gamblord.

This question was asked about the related product: Audio-Technica - Audio Technica AT-VM95E/H Headshell/Cartridge Kit - Green

• A:Answer It will fit, the only thing you will need to check on is the stylus overhang distance. Our Headshell/Cartridge Combo Kits come with the overhang set at 15.5mm. We have not been able to determine what the stylus overhang distance for the Denon turntable is, we advise being within .5mm of the turntable manufactures specified stylus overhang distance.

  Answered 1 year ago by AudioTechnica

  
  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this fit my Sony PS-LX3 turntable?

Asked 1 year ago by Nautilus.

This question was asked about the related product: Audio-Technica - Audio Technica AT-VM95E/H Headshell/Cartridge Kit - Green

• A:Answer It will not. You can use the cartridge itself, the AT-VM95E, but not the headshell. Your turntable has a straight tonearm and an angled headshell, you must use the Sony angled headshell.

  Answered 1 year ago by AudioTechnica

  
  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionWill the AT-VM95ML/H work on a Fisher MT-6224 turntable?

Asked 1 year ago by JohnH.

This question was asked about the related product: Audio-Technica - Audio Technica AT-VM95ML/H Headshell/Cartridge Kit - Red

• A:Answer Yes, it will.

  Answered 1 year ago by AudioTechnica

  
  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionJust purchased to replace the stock head shell and cartridge on my lp120 do they come pre aligned to my turntable specs??

Asked 2 years ago by Akscaram88.

• A:Answer Our Headshell/Cartridge Combo Kits come with the stylus overhang distance set at 15.5mm, the AT-LP120-USB Turntable calls for a stylus overhang distance of 16mm. We recommend stylus overhang be within 1mm of that specified by the turntable manufacturer, so the AT-VM95EN/H is good to go out of the package with this turntable.

  Answered 2 years ago by AudioTechnica

  
  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this work on my Fluance RT80?

Asked 2 years ago by Hiram.

This question was asked about the related product: Audio-Technica - Audio Technica AT-VM95ML/H Headshell/Cartridge Kit - Red

• A:Answer It will fit but is not the best match for the tonearm in terms of cartridge suspension compliance. If you replaced the headshell with one of a lighter weight, say this 6.7-gram model available from Parts Express, Part #230-010 the compliance would be better suited to the lighter effective mass of the tonearm assembly.

  Answered 2 years ago by AudioTechnica

  
  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this work on a vintage 1979 Mitsubishi DP-EC10?

Asked 2 years ago by Chet.

This question was asked about the related product: Audio-Technica - Audio Technica AT-VM95E/H Headshell/Cartridge Kit - Green

• A:Answer It will, but please note a couple of things, you will need to adjust the stylus overhang distance from 15.5mm, which it comes preset at, to 14mm which is the distance specified for your tone arm and make certain that you are NOT using any sub-weight in the end of your tonearm. The cartridge + headshell weight range for your tonearm without a sub-weight is 11 to 16.5g. The AT-VM95E/H Headshell Cartridge combo kit weighs 15.5g.

  Answered 2 years ago by AudioTechnica

  
  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionI have an AT-LP-USB player will this fit? The manual says only use an ATP N2 stylus. Is this the same thing?

Asked 3 years ago by Anonymous.

This question was asked about the related product: Audio-Technica - Audio Technica AT-VM95E/H Headshell/Cartridge Kit - Green

• A:Answer The AT-VM95E/H Headshell/Cartridge Combo Kit may be used in place of your existing headshell/ATP-2 Cartridge (with AT-N2 Stylus). Make sure you recalibrate (balance and zero out) your tonearm and set the tracking force (stylus pressure) accordingly after installing the AT-VM95E/H.

  Answered 3 years ago by AudioTechnica

  
  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this fit my Audio Technica AT-LP120-USB? I am missing all of the parts In the picture below.

Asked 3 years ago by Abby.

This question was asked about the related product: Audio-Technica - Audio Technica AT-VM95E/H Headshell/Cartridge Kit - Green

• A:Answer Yes, it will.

  Answered 3 years ago by AudioTechnica

  
  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionI have an Audio -technica model AT-LP60 turntable. Will this cartridge be compatible? Thanks!

Asked 3 years ago by pwoody.

This question was asked about the related product: Audio-Technica - AT-VM95C/H Headshell/Cartridge Kit - Blue

• A:Answer No, it will not. The cartridge itself is not replaceable, it is an integral part of the tonearm. Only the stylus assembly can be replaced and it should be replaced with the same model stylus, the ATN3600L Replacement Stylus.

  Answered 3 years ago by AudioTechnica

  
  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this fit my old Sansui P-D10? Thank you

Asked 4 years ago by Buzzy.

This question was asked about the related product: Audio-Technica - AT-VM95C/H Headshell/Cartridge Kit - Blue

• A:Answer You can use the AT-VM95C cartridge, but not the headshell which comes with the AT-VM95C/H Headshell/Cartridge Combo Kit. Your turntable features a straight tonearm so you are required to use the angled headshell that was provided with it.

  Answered 4 years ago by AudioTechnica

  
  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: Questionif I plug this into an AT turntable arm is the cartridge then properly aligned? Will it fit a P-Mount type tone arm?

Asked 4 years ago by Rickasaurus.

This question was asked about the related product: Audio-Technica - Audio Technica AT-VM95SP/H Headshell/Cartridge Kit - Gray

• A:Answer Stylus overhang comes set at 15.5mm on our Headshell/Cartridge Combo Kits. Check your turntables documentation for the specified stylus overhang distance, not all of our turntables have the same overhang specification. It is always best to check alignment after installation in the event something moved. No, it will not fit a P-mount type tonearm.

  Answered 4 years ago by AudioTechnica

  
  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this fit a technics slb2? Just plug n play basically?

Asked 5 years ago by DBS.

This question was asked about the related product: Audio-Technica - AT-VM95C/H Headshell/Cartridge Kit - Blue

• A:Answer Yes it will. Plug this Headshell/Cartridge combo kit in, balance the tonearm, set the tracking force and anti-skate and you are good to go.

  Answered 5 years ago by AudioTechnica

  
  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWill this fit a vintage AR 15 turntable

Asked 3 months ago by DC2026.

This question was asked about the related product: Audio-Technica - AT-VM95C/H Headshell/Cartridge Kit - Blue

• A:Answer We are not familiar with an Acoustic Research model 15 turntable, is it known by any other model or name?

  Answered 3 months ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this work for my JVC L F41 turntable?

Asked 6 months ago by RavenStihl.

This question was asked about the related product: Audio-Technica - AT-VM95C/H Headshell/Cartridge Kit - Blue

• A:Answer It will not, the JVC L-F41 Turntable uses a straight tonearm with an angled headshell; the angled headshell must be used in order to maintain the correct cartridge alignment. The headshell on the AT-VM95C/H Headshell/Cartridge Combo Kit is straight, not angled, and this would cause the alignment to be way off. You would need to mount the AT-VM95C Cartridge to your existing headshell. AT-VM95C Cartridge https://www.audio-technica.com/en-us/at-vm95c

  Answered 6 months ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this work good with my Victrola Hi-Res Onyx? Also is there a difference in the carts body that’s made in China Vs Japan?

Asked 7 months ago by Techie4U.

This question was asked about the related product: Audio-Technica - Audio Technica AT-VM95ML/H Headshell/Cartridge Kit - Red

• A:Answer You may use the AT-VM95ML Cartridge, NOT the headshell/cartridge combo kit. The headshell on your turntable is angled, not straight.

  Answered 7 months ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question