A:AnswerHi Steve,
Thank you for the interest! We recommend connecting wired speakers with a nominal impedance of 6 ohms to 16 ohms. 8 ohms speaker will work with this AV receiver.
Whether you choose to enjoy the warm sound of vinyl via the phono input, or stream music from your digital music collection, you’ve found a perfect match. Don’t forget the receiver’s A=B function lets you connect two pairs of speakers. You can easily switch between A or B or use them all together at the same time. When you factor in the low-profile design, we’re sure you’ve found the flexibility and performance you’ve been looking for!
-David
A:AnswerHi Dodge,
Thank you for the inquiry! Unfortunately, this AV receiver does not support subwoofer connection. You may want to consider the STRDH590 or STRDH790.
Whether you choose to enjoy the warm sound of vinyl via the phono input , or stream music from your digital music collection, you’ve found a perfect match. Don’t forget the receiver’s A=B function lets you connect two pairs of speakers. You can easily switch between A or B or use them all together at the same time. When you factor in the low-profile design, we’re sure you’ve found the flexibility and performance you’ve been looking for!
-David
A:AnswerIt's very easy, you just select the input you want to listen to, which in this case would be bluetooth and then activate your bluetooth on your phone, look for the amplifier and pair it. It's that quick and easy and the sound is great.
A:AnswerHi DS2023, Thank you for your inquiry! This receiver comes with a supplied FM antenna. It uses a proprietary plug so we only recommend using the supplied accessory. Hope this helps!
Whether you choose to enjoy the warm sound of vinyl via the phono input, or stream music from your digital music collection, you’ve found a perfect match. Don’t forget the receiver’s A=B function lets you connect two pairs of speakers. You can easily switch between A or B or use them all together at the same time. When you factor in the low-profile design, we’re sure you’ve found the flexibility and performance you’ve been looking for! Regards, Sam
A:AnswerHi there, Thank you for your interest in the Sony STRDH190! This receiver has a built-in FM radio and Bluetooth function to connect to your Smartphone. There is also an option to connect your phone via the Portable IN jack (3.5 mm) of this receiver. And if your Sirius radio and tape deck can connect via RCA or Bluetooth then they should also work with this receiver. Hope this helps!
Whether you choose to enjoy the warm sound of vinyl via the phono input, or stream music from your digital music collection, you’ve found a perfect match. Don’t forget the receiver’s A=B function lets you connect two pairs of speakers. You can easily switch between A or B or use them all together at the same time. When you factor in the low-profile design, we’re sure you’ve found the flexibility and performance you’ve been looking for!
Regards,
Sam
A:AnswerHi Kmac, Good question! This receiver is designed to receive a Bluetooth signal from a smartphone or tablet. It is not capable of transmitting one to a Bluetooth device such as wireless headphones or speakers. Hope this helps!
Whether you choose to enjoy the warm sound of vinyl via the phono input, or stream music from your digital music collection, you’ve found a perfect match. Don’t forget the receiver’s A=B function lets you connect two pairs of speakers. You can easily switch between A or B or use them all together at the same time. When you factor in the low-profile design, we’re sure you’ve found the flexibility and performance you’ve been looking for!
Regards,
Sam
A:AnswerHi Rowman, Thank you for your inquiry! Unfortunately, no. The STRDH190 does not have an HD tuner. But, you can still listen to regular FM radio tuner, stream music by connecting your device via Bluetooth, and enjoy the warm sound of vinyl via the phono input. Don’t forget the receiver’s A=B function lets you connect two pairs of speakers. You can easily switch between A or B or use them all together at the same time. When you factor in the low-profile design, we’re sure you’ve found the flexibility and performance you’ve been looking for! Hope this helps!
Regards,
Sam
A:AnswerHi Irish, Good question! This receiver does not have a DAC. But yes, you can add one to it. Hope this helps!
Whether you choose to enjoy the warm sound of vinyl via the phono input, or stream music from your digital music collection, you’ve found a perfect match. Don’t forget the receiver’s A=B function lets you connect two pairs of speakers. You can easily switch between A or B or use them all together at the same time. When you factor in the low-profile design, we’re sure you’ve found the flexibility and performance you’ve been looking for! Regards, Sam
A:AnswerHi Pcruz, Good question! Yes, you can adjust the tonal balance of the speakers by pressing the treble and bass button on the remote control. REF: https://www.sony.com/electronics/support/res/manuals/4726/f63b8edb2b154409daa55875111f95e4/47269071M.pdf (see page 21)
Whether you choose to enjoy the warm sound of vinyl via the phono input, or stream music from your digital music collection, you’ve found a perfect match. Don’t forget the receiver’s A=B function lets you connect two pairs of speakers. You can easily switch between A or B or use them all together at the same time. When you factor in the low-profile design, we’re sure you’ve found the flexibility and performance you’ve been looking for! Hope this helps!
Regards,
Sam
A:AnswerHi hemm1969, Good question! We're not sure what specific app you're referring to, but you can adjust the volume of the connected BLUETOOTH device (smartphone, tablet, etc.) first. If the volume level is still too low, press +/– to adjust the volume level of the receiver. Hope this helps! -Sam
A:Answeritr does come with an FM antenna range i do not know probably can find an upgrade if you need one
i doubt you will need anything extra for your turntable mine works fine with it
A:AnswerHi Rick543, Thank you for your inquiry! Are you referring to DBFB (Dynamic Bass Feedback)? If yes, unfortunately, this receiver doesn't have Dynamic Bass Feedback feature. But you can manually adjust the treble and bass level of this receiver using the supplied remote control. If you're referring to a different DBFB feature or function, please send us an email at [email protected] with the following details:
Name:
Username:
Model Number:
Inquiry/Issue:
Telephone Number:
Sincerely,
Sam
A:AnswerHi Andrew, Thanks for your inquiry! If the impedance rating of your JBL speakers are within 6 to 16 ohms, then they should work. You can connect up to four speakers and a subwoofer to this receiver. And for subwoofer compatibility, the available inputs and outputs on the subwoofer will determine whether or not the subwoofer will be compatible. Check the subwoofer to determine if it has IN and OUT speaker wire connections. If so, connect the left and right speaker wires from the stereo receiver into the left and right speaker IN on the subwoofer. Then, connect speaker wire from the left and right speaker OUT on the subwoofer to the left and right main speakers. If the subwoofer does not have IN and OUT speaker wire connections, then it will not be compatible with the stereo receiver. Hope this helps! -Sam
A:AnswerInput 1,2,3 or 4. The other two inputs it has is one for a turn table and the other is a 3.5mm Jack on the front for a portable device like a mp3 player.
