A:AnswerHi, Les!
Yes, you can plug in a ceiling speakers to this AV receiver as long as it matches the required nominal impedance of 6 ohms to 16 ohms. It does support FM radio and Bluetooth for audio playback.
Happy to help,
David
A:AnswerHello, barry!
We regret to hear about this experience, please email us at [email protected] with the following details so we can help you out:
Name:
Username:
Model Number:
Issue:
Telephone Number:
Best Time to Call:
Sincerely,
Zac
Sony Social Support
A:AnswerHi, TomO!
We recommend putting the unit in standby mode by pressing the power button when not in used. And yes, there is also an option for this unit to go to sleep mode.
-Sam
A:AnswerHi, TomObenschain!
6 to 16 ohms is the required speaker impedance to this AV receiver. No audio may occur if you connect speakers that are not within the speaker impedance.
Regards,
David
A:AnswerHi, Harley! To connect a turntable that only has a PHONO output jack, you need to connect a phono equalizer (not supplied) between the turntable and this receiver. ~Ralph
A:AnswerHi, Customer!
Yes, this AV receiver can accommodate 5.1 speaker system and supports HDMI connection. See link for more details.
https://www.sony.com/electronics/support/res/manuals/4726/77097a537da5ba500a3b8f86b000eb2c/47269091M.pdf
Happy to help,
David
A:AnswerThat's exactly what I use it for... but I run the output to my 4K LED, instead of a projector. I wouldn't see why there would be any difference what video display you use. Plus, it works better to use the 4K pass through with this reciever... now I don't have any audio/video syncing issues, as I did with having the audio and video going through my TV separately(via optical cable and HDMI). Now both are fed through the reciever with one HDMI input to output.
A:AnswerHaven't tried that, so not entirely sure, but best guess is maybe. The speaker terminals are front, center, and surround (and subwoofer). There is not the typical A/B speaker set up. The manual says that when 2 channel stereo is selected "the sound field is suited for playing back audio signals as they are from two front speakers only, without adding any virtual surround effect. The sound is output from the front left/right speakers only."
But if your input signal is 2 channel (no surround) and you select Multi-ch Stereo, there's a chance it will send the same 2 channel signal to the front and surrounds. Sorry couldn't be more definite.
A:AnswerI haven’t tried but my experience so far only one device can be selected for play. There may be a way but that is something that Sony could answer.
A:AnswerHi Ffmedic911, The width of this receiver is 17 inches (430 mm). If you need more details, check this link: https://docs.sony.com/release//SPECS/STRDH590_mksp.pdf
Regards,
Vincent
A:AnswerHi Heavyman11,
You can only hook up speakers to this AV receiver using a speaker cable. Speakers must have a nominal impedance of 6 ohms to 16 ohms otherwise it will not work. See page 15 for more information.
https://www.sony.com/electronics/support/res/manuals/4726/55cd375e0f9e7103f2b6baa747ed9072/47269061M.pdf
Happy to help,
David
A:AnswerHi Pegs,
No, the HTCT290 is a wireless subwoofer. You can only hook up a wired subwoofer to this AV receiver. See link for details.
https://www.sony.com/electronics/support/res/manuals/4726/55cd375e0f9e7103f2b6baa747ed9072/47269061M.pdf (page 16)
Happy to help,
David
A:AnswerHi Shane,
The receiver supports HDCP 2.2, Dolby Vision, HDR10 letting you enjoy high quality video images. Please refer to this link below on how to resolve your issue.
https://www.sony.com/electronics/support/res/manuals/4726/55cd375e0f9e7103f2b6baa747ed9072/47269061M.pdf (page 18)
Thank you for the inquiry!
David
A:AnswerHi FreddieMercury,
We do apologize for the inconvenience. Yes, there is a way to synchronize the audio with video output using the “A/V SYNC” function of the AV receiver. You may refer to this link for guideline.
https://www.sony.com/electronics/support/res/manuals/W001/W0014753M.pdf (page 65)
Happy to help,
David
