Questions & Answers

Q: QuestionWhat is the resolution of the VPLXW5000ES projector?

• A:Answer The VPLXW5000ES projector has a 4K resolution (3840 x 2160).

Q: QuestionDoes this projector have speakers?

• A:Answer No, this projector does not have integrated speakers.

Q: QuestionWhat is the brightness of this Sony projector?

• A:Answer This projector has a brightness of up to 2,000 lumens.

Q: QuestionHow long does the laser light source in this projector last?

• A:Answer The laser light source can last for up to 20,000 hours.

Q: QuestionWhat type of content can I watch with the IMAX Enhanced feature?

• A:Answer This projector is compatible with IMAX Enhanced content, allowing you to experience more immersive visuals on a larger screen.

Q: QuestionDoes this have the same mounting configuration as the older Sony models such as the VPL-HW20?

Asked 2 years ago by bv.

• A:Answer I’ve owned 4 Sony projectors. I don’t know recall the first one. The others were VPL-VW100, VPL-VW325ES and VPL-XW5000. All of those had the same mounting bracket to hang from the ceiling.

  Answered 2 years ago by Anonymous

  Helpful (10)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionCan you stream Netflix an if it does is there any shows that i might not be able to stream?

Asked 2 years ago by Rich.

• A:Answer This has no built in streaming services. You have to supply all the inputs to it. I would recommend going into a receiver with hdmi IN and then just have one hdmi cable out to the projector. The hdmi outs are on the side, so a streaming stick plugged in would look a little odd.

  Answered 2 years ago by SmaterblahVerified Purchase

  • 
  • 
  Helpful (3)Unhelpful (0)ReportAnswer this question

Q: QuestionWhat is the throw of this projector? If I am projecting from say 50 feet, would I still get good image quality?

Asked 2 years ago by JHELVEY1975.

• A:Answer Sony's recommended throw distance is 6.5' - 20.1' You would need to ceiling mount for this projector at 20' or less from the screen for the best results. As a side note: None of the current laser line from Sony or JVC have a through distance of 50'. This long distance would reduce light hitting the screen anyway. Your best option is to ceiling mount as close as you can to the screen while still maintaining the image size you need to fill your screen.

  Answered 2 years ago by MrChuckVerified Purchase

  Helpful (2)Unhelpful (0)ReportAnswer this question

Q: QuestionHi. I see it listed as home theater.What is the rating on this projector for gaming?

Asked 2 years ago by Anonymous.

• A:Answer It has worked great for me. I game 50% of it's use, and was a big improvement from my previous optoma projector. Has a very good refresh rate for a projector.

  Answered 2 years ago by AnonymousVerified Purchase

  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWill this projector work well with a 160" screen? If so, how far back from the screen does it have to be mounted? Looking to finish our theater in the next month so a prompt reply would be so appreciated, thank you!

Asked 3 months ago by pittfanman.

Q: QuestionVectored to Sanus mount by the BestBuy employee, but doesn't work because of heavy tilt. Can't find a good answer anywhere. In simple terms, WHAT IS THE BEST MOUNT FOR THIS PROJECTOR?

Asked 6 months ago by Dutch.

• A:Answer I'm using an Atdec Telehook mount but I think the answer might be in the setup that makes the Atdec work and might also make your Sanus work. They stress that you find the center of gravity (CoG) for the projector by balancing it on a pole on the floor front to back and then side to side. Adjusting the arms on the mount to place the pole from which it hangs at the CoG point you identify balances out the "heavy tilt". This was critical when hanging mine. Good luck and I hope you have already solved this one

  Answered 6 months ago by terrybillVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWhat is the projected lamp life of this unit?

Asked 7 months ago by Anonymous.

• A:Answer Spec is 20,000 hours

  Answered 6 months ago by terrybillVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionMine now shows Please replace lamp, can I buy a new lamp? can you install?

Asked 8 months ago by Lamp.

Q: QuestionWhat would be the Max recommended Screen Size for this projector

Asked 9 months ago by ChiTown.

Q: QuestionDoes Sony 8k come with apps

Asked 1 year ago by Rjv.

Q: QuestionIs this 4k 120hz or 60hz . Why do noone of best buys specs tell what the refresh rate is?

Asked 2 years ago by SuperSpeedScooter.

• A:Answer 60hz

  Answered 1 year ago by ConnorVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWhat 120in screen models would you recommend for this projector under $1500.

Asked 2 years ago by BestScreen.

• A:Answer I purchased the Screen Innovations - 5 Series 120" Fixed Projector Screen - Black/Gray and would strongly recommend spending the extra money for this screen. It is definitely worth the extra expense. Why purchase a Cadillac and put a Volkswagon engine in it? Upgrade your screen!!!

  Answered 2 years ago by Ramb53Verified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionLooking for a above average screen to pair with this projector. In reviewing most new screens looks like they are built for short throw projectors. Can I use one that is listed as a short throw for this projector. Or any good recommendation.

Asked 2 years ago by mjreed.

• A:Answer This projector will not work with a (UST) Ultra Short Throw screen. UST (ultra-short-throw) screens are designed to reject light straight on and only accept light from the bottom. A UST projector sits about 2 feet from the screen-bottom (some can be ceiling mounted upside-down). Then there are "Short Throw" projectors that point sit about 6-10 ft away from the screen but point directly at at the screen. The Sony XW5000 is a standard throw projector which works best with a screen with gain of up to zero to 1.3 . This projector does not need a high gain screen or a grey screen. #1. Decide do you need a fixed screen or a pull-down screen or motorized dropdown. If you want a screen that drops down, you want a tensioned screen. Otherwise there will be some ripples in the screen. #2. How much are you willing to spend. Plan to spending $400 to $1000 and more if you want motorized. #3. Select a screen with minimal gain and standard throw and the screen at least needs to be rated for HD but should state 4K. This matters due to texture. You want the very smooth surface. You do not want a woven fabric screen. This is a typical screen that would work with this projector. Model:NS-SCR100FIX19W SKU:6416551 I recommend you ask questions at Best Buy since the above screen specs do not clearly state gain factor. This screen is better and has a gain of 1:1 Model:AR100WH2 SKU:3980141

  Answered 2 years ago by MrChuckVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionDoes it come with a ceiling mount. If no, which model works best.

Asked 2 years ago by hyd17.

• A:Answer Chief brand is good but expensive. I used 'QualGear Pro-AV QG-KIT-CA-3IN-B Single Joist Ceiling Adapter, 3" 1.5" Projector Mount Kit Accessory, Black' about $80 in Amazon, works well

  Answered 2 years ago by AnonymousVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionWhat are the dimensions of the image that the projector will portray from a throw of 20 feet?

Asked 2 years ago by Anonymous.