A:AnswerThis kit is designed to be attached to the vehicle fuse box, usually using fuse taps. One of the two power leads needs to be attached to an always on fuse/source and the other to a fuse/source that only has power when the ignition is on. This configuration is necessary if you wish to use the parking mode where it will record when an event is detected when the car is parked/ignition off. I don't have the instructions available right now, but I believe it can be set up without the parking mode option. Connecting to the battery would most likely require extending the wires and result in an always on camera. And, of course, if connecting directly to the battery, make sure you have adequate fusing just to be safe.
A:AnswerThey are the typical thin wires used in most small electronic’s. When I installed the kit in my car I chose to solder the wires rather then using connectors due to the small size of the wires.
A:AnswerI don't know BUT when I got it installed, it freed up my cigarette lighter and all the wiring is now hidden. The installer got power from the fuse box.
A:AnswerJust one hardwire. Your dual camera will come with the necessary connection to run power to both. But for the hardwire it’s 1. As if you were using the cugarette lighter.
A:AnswerParking mode can be disabled via software function, or just power down camera at night. Camera will power on automatically when you start the car.
A:AnswerHi there,
Yes! The TW-SH accessory is compatible with the F800 model.
Please feel free to contact us directly by email ([email protected]) or phone (1-844-865-9273) if you have any other questions.
Kind regards,
Thinkware Customer Support
A:AnswerHi there! The Thinkware Hardwiring Cable (TWA-SH) is compatible with the X500 model. Please contact us directly if you experience difficulty locating our products by email ([email protected]) or phone (1-844-865-9273). Kind regards, Thinkware Customer Support
A:AnswerHi there,
We are sorry to hear about this. Please contact us directly by email ([email protected]) or phone (1-844-865-9273) to receive the correct length cable.
Thinkware Customer Support
A:AnswerHi there! If hardwired and grounded properly with the Thinkware Hardwiring Cable, excessive power would not be an issue. We recommend professional installation for guaranteed results. Please contact us directly by email ([email protected]) or phone (1-844-865-9273) if you have additional questions. Thinkware Customer Support