Questions & Answers

Q: QuestionDoes this router have a firewall?

• A:Answer Yes, this router comes with a SPI firewall.

Q: QuestionCan I control this router with my voice?

• A:Answer Yes, you can control this router with your voice using Alexa and Google Assistant.

Q: QuestionWhat is the maximum speed supported by this router?

• A:Answer This router supports a total speed upto 7.8 Gbps across all three bands.

Q: QuestionHow many LAN ports does this router have?

• A:Answer This router has 3 LAN ports.

Q: QuestionDoes this router support the latest security standard?

• A:Answer Yes, this router supports WPA3, the latest security standard.

Q: QuestionI need a router that has signal capability of about 100 feet. Router is on second level and user devices downstairs. Three walls in both directions. Is there a single router capable to service this area?

Asked 2 years ago by Bigfoot.

• A:Answer I got this router in a closet, on the main floor. goes through the closet, into the basement, across 3 walls to reach the very corner and I still get about 70% of my plan speeds. The range tanks outside though.

  Answered 2 years ago by JohnVerified Purchase

  Helpful (10)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionDoes this router support VPN's? Is so, which VPN is preferred, ie)NordVPN, expressVPN, etc? Thank you, JT

Asked 2 years ago by Phamdoc.

• A:Answer Hi JT! If you are asking whether you can use your existing VPN software on your conneced devices, then yes, the router supports VPN passthrough. If you are asking about VPN Server/Client capabilities, the router supports OpenVPN, PPTP VPN, and L2TP VPN functionality in both Server and Client capacity.

  Answered 2 years ago by TPLinkSupport

  
  Helpful (4)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionCan this be added to a Deco XE75 Mesh system?

Asked 2 years ago by ChristopherP.

• A:Answer No, not if you are looking to create a Mesh network between the two. Deco and Archer are not compatible in a Mesh environment. if you were to use one as a router and the other in AP mode they could work together but it would be separate networks. And one of the systems would loose a lot of its value as all it would be is an WAP

  Answered 2 years ago by TPLinkSupport

  
  Helpful (3)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionCan this router accept an ethernet cable directly from my verizon fios ONT? Can it have a USB drive connected to reach from my home network?

Asked 2 years ago by Jeff.

• A:Answer Yes, and yes. The router can be connected to your ONT via Ethernet cable, and is equipped with 1× USB 3.0 Port and 1× USB 2.0 Port.

  Answered 2 years ago by TPLinkSupport

  
  Helpful (2)Unhelpful (0)ReportAnswer this question

Q: QuestionCan you connect TP-Link - Archer AXE7800 wirelessly to the modem without using the ethernet cable?

Asked 3 years ago by GetTheBest.

• A:Answer No. The main Deco unit must be wired via Ethernet cable to your Internet source (e.g., your modem).

  Answered 3 years ago by TPLinkSupport

  
  Helpful (2)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionWill this router work good with fidium 300mbps plan?

Asked 7 months ago by Jim.

• A:Answer Hi Jim, The TP-Link Archer AXE7800 would be an excellent match for your 300Mbps Internet plan. Simply connect the TP-Link router to your existing Internet source (e.g., modem, ONT, or gateway) via Ethernet, and use the included Quick Installation Guide or our intuitive TP-Link Tether app to conveniently set up and manage your router.

  Answered 7 months ago by TPLinkSupport

  
  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionI need to replace to different router. Is this router compatible with Spectrum internet?

Asked 2 years ago by Anonymous.

• A:Answer Yes. I've had spectrum for years and recently replaced my router. This is a great choice honestly. It's also massive but then again my previous one was small.

  Answered 2 years ago by ReneeVerified Purchase

  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionHow many devices can this handle ? And can I connect this to my nighthawk modem/router c7000?

Asked 2 years ago by Saulo.

• A:Answer Maximum connected client device quantity will depend on various factors including network bandwidth usage, how many devices are on each band, and other environmental variables within the network. Yes, you can connect it to your existing modem/router via Ethernet. However, it is generally recommended to only have one router in a network, so we would suggest setting the C7000 in modem-only, or "bridge" mode.

  Answered 2 years ago by TPLinkSupport

  
  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: Questionis this router compatible with ASUS router aimesh systems?

Asked 2 years ago by ez.

• A:Answer No, its not likely. However if the Asus is compatible with EasyMesh then they may be able to work together EasyMesh is a general unified protocol. So if a device is EasyMesh Complaint it can work across brands.

  Answered 2 years ago by TPLinkSupport

  
  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionWhat is the total square foot area of coverage?

Asked 2 days ago by Stan.

• A:Answer Hi Stan, Wi-Fi coverage varies from one home to another based on factors including, but not limited to, placement of the router (central is typically ideal), obstructions (e.g., walls) between the router and connected devices, the density of the home's construction materials, which Wi-Fi band your devices are connecting to, and Wi-Fi interference from external sources.

  Answered 1 day ago by TPLinkSupport

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionDoes this device support connections to Dynamic Frequency Selection (DFS) channels on the 5 GHz band?

Asked 1 week ago by Crowded5GHz.

• A:Answer Hi, Yes, the Archer AXE7800 supports Dynamic Frequency Selection (DFS) for 5 GHz channels.

  Answered 6 days ago by TPLinkSupport

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionDoes this router support Ethernet cable internet

Asked 1 week ago by Yesi.

• A:Answer Hi Yesi, Yes, the Archer AXE7800 connects to your existing Internet connection via an Ethernet cable to its WAN port and has four LAN ports for your local wired devices.

  Answered 1 week ago by TPLinkSupport

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionCan the antennas be taken off/unscrewed from the main body?

Asked 1 month ago by LAWLLL.

• A:Answer Hi LAWLLL, No, the antennas on the Archer AXE7800 are not detachable.

  Answered 3 weeks ago by TPLinkSupport

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionHello, does it have a coaxial input?

Asked 1 month ago by Effie.

• A:Answer Hi Effie, No. The Archer AXE7800 utilizes Ethernet (RJ45) for network connectivity. Typically, if you have cable Internet, the coaxial connection should go to the cable modem. Then, you can connect the modem to the router using an Ethernet cable.

  Answered 1 month ago by TPLinkSupport

  
  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)