Customer Ratings & Reviews

Hello, this is my honest opinion about new Rexing motion detection system. I am a truck driver and was searching for a motion detection system that should be small, black, weather proof and easy to install (and be hidden). I leave my truck on the truck stops or sometimes I rest in the cabin, and I cannot see every single motion around my truck. I saw lots of hits and runs with my own eyes and really wanted to take a few steps to protect myself. I discovered this small device during my search online and based on my previous positive experience with Rexing I did not hesitate to buy it (it was at a lower price point of my budget, which is a plus). I got it within a few days and it took me about 20-25 minutes to install. It is super small and is hidden behind my mirror. I tested it and it detects motions as intended. I am driving all over US so having weather proof gadget is my preference. Also, I was happy about 18-month warranty. Now, I feel confident I can use this device for a long while and be covered if needed. I am very happy, it met my expectations. Not all of us have Teslas with all the cool features, so devices like that help! Great buy

An affordable and worthy investment towards protecting your vehicle. Easy-to-follow, illustrated instructions are provided in the manual. Took me less than 5 minutes to set it all up. Cable is generously long. Unit is slim and takes very little room on the winshield. Importantly, this product will not work for hybrid or electric vehicles, only ICE vehicles, as stated by Rexing in the product's description ("Note: This product is compatible with gasoline vehicles only. It is currently not supported for hybrid or pure electric vehicles."). I discovered this to be the case afte the fact when I attempted to install it first on my mother's hybrid vehicle-- the sensor would not keep on when the car is off and no amount of noise or movement created would activate the dash cam. Yet, when I installed it on my ICE vehicle, it worked just as described. Just be sure to deactivate the Parking Monitor function ON the dash cam for this kit to work properly. Overall, very satisfied with it.

I picked up the Rexing Intelligent 360 to go with my dash cam, and I’m glad I did. It’s one of those accessories you don’t realize you need until you have it. The motion detection is really sensitive, which is exactly what you want when your car’s parked somewhere unfamiliar or overnight. It gives me a lot more peace of mind knowing it’s watching in every direction, since the 360° coverage basically eliminates blind spots. Setup was simple—Rexing made it easy with the OBD-style plug and cable. I didn’t have to mess with complicated wiring or spend hours figuring it out. Once it was connected, it worked seamlessly with my dash cam, almost like it was part of the system from the start. Overall, it just adds that extra layer of protection that makes me feel better leaving my car parked. It’s not flashy, but it does exactly what it’s supposed to do, and it does it well. If you already own a Rexing dash cam, I’d definitely recommend adding this to your setup.

The Rexing Dual Intelligent Hardwire Kit is a solid choice for powering Rexing dash cams. It’s compatible with both Type-C and Mini USB models, making it versatile for different cameras. Installation is straightforward, and the kit provides reliable continuous power while protecting your vehicle’s battery from draining. The build quality feels sturdy, and the kit keeps cables organized and out of sight. Overall, it’s a practical upgrade for anyone wanting uninterrupted dash cam recording and a cleaner setup.

If you have a rexing dash cams this is a great accessory to have with it. This Dual Intelligent Hardwire Kit is compatible with Type-C & Mini USB for all Rexing Dash Cams. This is a proximity motion detection instead of impact which is great when parked. It will powered on when movement is detected within approximately 20 to 30 feet, depending on the sensitivity mode selected. It draws very little power—around 3W during recording and under 2W in standby minimizing battery drain. It includes adjustable low voltage cutoff settings (11V–12V) to prevent over-discharge, I would recommend using the higher cutoff if your vehicle struggles to start. Keep in mind this connect to the OBD2 connector. It was easy to install and to plug in, just need to hide the cables nicely. I recommend getting this.

Rexing’s radar-based camera wiring harness is a simple solution to achieve parked car security based on proximity movement. Unlike the rexing dash camera’s impact-based activation feature (make sure to disable it when using this radar), this device enables dashcam power (USB-C or Mini-USB) when proximity movement is detected. It has low and high sensitivity modes which work well at around 30-feet, and 20-feet respectively in my testing. It’s power draw when running the my dash camera (V1P SE) is around 3W, and less than 2W when in standby sensing for a target detection. This means the passive power drain on the car battery is very low. It has three different power shutoff voltages between 11v and 12v where it will turn off automatically to prevent over discharge of your car battery. If your car turns over slow or takes a lot of cranks to start I would recommend leaving the shutoff at a higher voltage. Overall I am happy with this product. It frees up the 12v cigarette lighter my camera used to take power from. The only downside is the space it takes up near the rear view mirror - I suspect if the sensor could be mounted next to the dash camera on the passengers side it would be less intrusive.

This device works well... details later. Installation The pictures show the FIRST temporary testing installation. I will install it temporary until assured that everything works. This final install will be excessively easier than the original camera install; NO need to go into the fuse box, just plug onto the ODB2 connector and “fish” the cable to the mirror behind the panels for a totally hidden wire install. My System This install is a casual add on feature for my existing camera, a forward facing camera with an additional rear window camera. The camera was installed with the parking alarm feature not operational due to my wiring mistake. So, this add on device easily adds-back an enhanced 360 degree tamper alarm. The operation is simple, not much to go wrong. The device detects movement and triggers the camera to record. This is not a great aid to me during daily use because I park nightly in a garage. However, when I travel, I have always wanted to know when at a hotel lot if people are looking into the car! I will probably be moving this and the camera to a work truck where it is better needed and purchasing a internal 360 camera. Price is a bit high, but the easy installation helps offset some of the cost. It does what it is intended to do, installs easy, hard to give a rating less than 5 stars.

A nice upgrade to my existing Rexing v1p dash cam I already use in my vehicle. Used this hardwire motion detection device for a couple weeks and so far it has worked great. The sensitivity is very good and has caught motion nearby my vehicle. A nice feature of this hardwire kit is that it has a safety feature in case your battery reduces below a set value. So you don’t have to worry about draining your battery below a safe level. Setup was a breeze. Just connected to the existing camera and used the obd connnector to get connected to the car. (which is super easy to do).

I have been using Rexing dashcam for years and have always been satisfied with it due to its simplicity and reliability to transfer video clips from dashcam to my computer. I have now added the Intelligent 360 into my Rexing system and am excited to see now I have motion detection integrated into my dashcam. Highly recommended!

Been runnin’ the R316 for a good while now, and figured it was time to get the hardwire kit to clean things up and make the whole setup more permanent. This kit did exactly what I hoped it would. No more fussin’ with the power outlet every time I start the truck - it just comes on, does its thing, and keeps watch even when I’m parked. Install was simple enough. I ain’t no mechanic, but with a little patience and a few zip ties, it went in clean. Cable tucks away nice, not hangin’ down or gettin’ in the way. The parking mode kicks in just like it should, and it shuts off when it needs to. Feels like Rexing thought this thing through real well. Down here in NC, summers can cook an egg on the dash, and so far this setup’s handled the heat without flinchin’. I’ve been stickin’ with Rexing for a reason - their gear holds up, and this hardwire kit’s no different. If you’ve already got one of their cams, this here’s the piece that brings it all together.

It was a pleasure using this wiring kit. It only took about 1/2 hour for me to install (because I was taking care to hide wires carefully). I've purchased a few Rexing Dash Cams over the years and even the old Hardwire kit, so this kit was a pleasant surprise as to how easy it was to use.... No dealing with fuse taps or anything, just plug it into the ODB port. Best Buy shipped the item quickly.

Received the Rexing Smart Hardwire Kit with 360° Motion Detection product very fast. Looks good. Cant wait to start using it. Customer service is great. Communicate pretty fast.i recommend this company to everyone. 5 stars.

I’m a true believer of Rexing’s products. The Rexing products I have is a body Cam, and I’ve had 4 dash cams and now I have the Intelligent 360 monitoring system. In my experience with the Intelligent 360 monitoring system, I have to say that this device does everything that it’s been advertised to do. I can rest easy when I park in a parking lot knowing that my vehicle is being watched by this device and I sleep a little better at night knowing that I will have a video of the surroundings around my vehicle. The only real way to find out how it well it works is to get one for yourself. I would recommend that everyone to get Intelligent 360 monitoring system for their vehicle along with a Rexing 4k Dash Cam.

Great addition for my dashcam. My current dashcam already has a vibration wake up feature but this motion sensor add-on adds an extra layer of protection for when it comes to my car being parked. Super easy to install since it's location is about 6 inches away from the current dashcam.

I was always jealous of Tesla owner as the car start recording when you approach it, This is perfect addition to have your car protected at all times, it monitors all around if anyone appraoches your car it starts recording

works fine. added security feature for my car. paired with my rexing R316 dashcam.

I am a big fan of Rexing products. One of my cars has a Rexing dash cams that is installed via hardwire, and other two via cigarette lighter. Hardwire install is a great option because it keeps on recording the video even after the car is turned off, and if or when the voltage drops, it automatically shuts the camera off to save the battery enough for you to be able to start the car next time. What I like about this product is the ability to start recording video whenever there is a motion in front of the camera, instead of recording everything at all times. This way energy saving is even more efficient. As with any other Rexing products, hardwire installation is pretty straghtforward and relatively easy or if in doubt you can always have BestBuy Geed Square team do it for you for a low cost. It claims to work with all of Rexing dash cameras, except 4G LTE ones. It comes with a long 13ft Cable - long enough for most cars for battery connections. As with other hardwire installation options from Rexing, Low Voltage Protection is present in this product to cut the power at safe voltage levels to prevent drain of car's battery. So far it has been working great as claimed, and I highly recommend this product to anyone who wants to have the option for their dash camera to record even when a car is parked and turned off. Great buy.

I picked this up to pair with my Rexing dash cam so I could enable parking mode, and it works exactly as advertised. The 13-foot cable was more than enough to route neatly around my car’s interior, and the connectors felt solid. Installation does take a bit of time (I recommend using a fuse tap and watching a quick install video if you’re doing it yourself), but once set up, it powers the camera reliably even when the car is off. I really appreciate the built-in low-voltage protection: I don’t have to worry about draining my battery overnight. After a few weeks of use, I’ve had zero issues. My dash cam automatically switches between driving and parking modes, and the footage has already helped me spot someone who bumped my car in a parking lot. If you own a Rexing dash cam and want 24/7 coverage, this hardwire kit is absolutely worth it.

I installed the Rexing Dual Intelligent Hardwire Kit in my Jeep and it has been a game changer. The setup was straightforward and it connected cleanly to my dash cam. The motion detection and parking monitor features work exactly as advertised. Even when my Jeep is off, the camera activates if there is movement nearby. This has made me feel much more confident when parking at the airport or leaving my vehicle overnight. Knowing my dash cam is watching even when I am away gives me real peace of mind. I also appreciate the low voltage protection so I never have to worry about draining the battery. If you are running a Rexing cam and want full-time coverage, this hardwire kit is a must have. Solid build, easy to install, and works great with my Jeep. Highly recommend.

The Rexing Dual Intelligent Hardwire Kit was easy to install with an existing Rexing Dash Cam. I was using the cigarette lighter port to power the unit. This by far is a much sleeker install and provides 24/7 Parking Monitor with motion detection. I am very pleased with the product. Rexing has been a great maker of Dash Cams and their customer/technical support is amazing.