Questions & Answers

Q: QuestionWhat comes with this Audio Technica cartridge?

• A:Answer This cartridge comes with two 11 mm installation screws, two 8 mm installation screws, two washers, two nuts, and a non-magnetic screwdriver.

Q: QuestionHow is the cantilever on this cartridge constructed?

• A:Answer The cantilever on this cartridge is carbon fiber-reinforced ABS.

Q: QuestionWhat is the tracking force of this Audio Technica cartridge?

• A:Answer This cartridge has a tracking force of 2.0 to 4.0 grams with 3.0 grams being standard.

Q: QuestionWhat is the frequency response for this Audio Technica cartridge?

• A:Answer The frequency response for this cartridge is 20-18,000 Hz.

Q: QuestionDoes it fit a Pioneer pl-s70

Asked 2 years ago by Donald.

• A:Answer The AT-XP3 Cartridge should be fine as long as you will be mounting it to the Pioneer half-inch headshell and the cartridge falls within the acceptable cartridge weight range specified in the tonearm specifications section of the PL-S70 User Manual. The cartridge with mounting screws weighs 7 grams.

  Answered 2 years ago by AudioTechnica

  
  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionDoes Audio Technics sell cartridges for linear straight arm turntables??

Asked 10 months ago by Convenient.

• A:Answer Is it a Plug-in (aka P-mount or T4P) type cartridge? If so, our AT81CP and AT85EP Cartridges will work on a linear tracking tonearm.

  Answered 10 months ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionIs this compatible with a JVC AL-AL151BKX Turntable??

Asked 2 years ago by Dande.

• A:Answer Yes, I believe so--but in case you didn't know --The DJ name in the listing is for DJ "scratching" --meaning that this style of stylus is a little stiffer--I would recommend A/T VMN95C cartridge

  Answered 2 years ago by DaleauphileVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this cartridge work with a Harman Kardon T 20 turntable?

Asked 2 years ago by Sully.

• A:Answer It will fit and the weight of it is within the acceptable cartridge weight range, but the XP3 is not the best choice in terms of stylus suspension compliance. The tonearm on the T 20 Turntable has an effective mass of 8 grams (with the carbon fiber headshell provided) which puts it in the low mass category. The tonearm is designed to perform best when paired with a high-compliance cartridge. The compliance of the AT-XP3 Cartridge is 10cu @10 Hz, which is medium compliance. The resonant frequency of this tonearm/cartridge combination would be 13Hz, which is above the preferred range of 8 to 11Hz. The AT-XP7 Cartridge (elliptical tip) is better suited. You could also use our VM510CB Cartridge if you prefer a conical tip. Both models have a compliance of 14cu which would result in a resonant frequency of 11Hz.

  Answered 2 years ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionIs this cartridge compatible with audio technica AT LP60

Asked 2 years ago by Jeff.

• A:Answer No--Not for straight arm turntables

  Answered 2 years ago by DaleauphileVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionStandard or P-mount?

Asked 3 years ago by NewsView.

• A:Answer Standard Mount

  Answered 2 years ago by DaleauphileVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionIs this compatible with a Pioneer PL-640 turntable?

Asked 3 years ago by Kevin.

• A:Answer Yes, it is.

  Answered 3 years ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionLet me know if this fits on a Pioneer PL S50 turntable. Thanks

Asked 3 years ago by jcerazo.

• A:Answer Yes it does.

  Answered 3 years ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: Questionwill this fit and work in a technics SL010 turntable

Asked 3 years ago by Cartridge.

• A:Answer Please check your turntables model number for accuracy.

  Answered 3 years ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionHave a old Sansui turntable 5080 model what cartridge size fits

Asked 3 years ago by Rock.

• A:Answer The AT-XP3 Cartridge is a good fit for your turntable.

  Answered 3 years ago by AudioTechnica

  
  Helpful (0)Unhelpful (1)ReportAnswer this question