A:AnswerHi Fester,
Yes, Wired phono or preamp connection
Switchable phono or preamp line output lets you easily connect directly to your receiver, standalone powered speakers, computer, and other components.
Insignia support
Irene
https://www.bestbuy.com/site/brands/best-buy-brands/pcmcat1596746025285.c?id=pcmcat1596746025285
A:AnswerFirst, it should have come with a spare. If you have used that already, then you can go to Amazon and look for a replacement. It doesn't appear that Best Buy sells one.
You could tie a piece of string around where the belt goes and then measure that.
I don't have first hand knowledge on the measurements (I do have this turntable, but haven't measured it), but speaking to others, it appears that the belt is about 270mm (folded) or about 540mm total length. I believe it is a 6mm wide belt. You can try searching for "270mm turntable belt" and you'll find a lot. They're relatively cheap. Also you can buy a multipack that has different lengths just in case.
Hopefully this helps.
A:AnswerThis is also a Bluetooth turntable, it should connect easily to your Alexa or Echo dot, just give the voice order "Alexa, turn on Bluetooth" and turn on the Bluetooth on the turntable, make sure no other device (like your smartphone) is connected to your Alexa device (turn off Bluetooth on your smartphone before the process just to make sure).
A:AnswerThe turntable Bluetooth should pair with most Bluetooth devices. It will remember your previous pairing so you don't have to pair again. I'm not sure about multiple devices.
A:AnswerThis turntable has a full-size platter and the cover can be completely closed while record is playing. Just be careful opening or closing when album is actually being played as it is easy to make the stylus skip from any sudden motion.
A:AnswerNo, this turntable will not work with Sonos system via Bluetooth. The only way to add up this or any other turntable to a Sonos System is using "Port" which is a streaming device that have a "Line in" input where you can connect your turntable to be streamed through your home or office.
A:AnswerYou are having the same problem I am having. When a turntable does not have a ground post (The Insignia does not), you have to do it the old-fashioned way. Loosen one of the chassis screws and attach the ground wire to that. Impossible to do with this Infinity Turntable. Why? Because not one screw on the turntable screws into grounded metal. All the screws go into fiber board. I have come to the conclusion the only way this turntable can be used is with its built in preamp and that is what I am doing. I have it plugged into one of the line-level inputs on my receiver.
