A:AnswerThis unit does not have phono section but if you have a turntable that does or have a separate phono preamp then yes. Connect the phono preamp to any of the line inputs.
A:AnswerYes, you will need to connect your speakers with a wired connection. Any smaller gauge speaker wire will work. The Bluetooth can pair with up to 8 devices. AM and FM antennas are required for best reception and are included.
A:AnswerYes, you can play music from Spotify on the receiver from your phone via Bluetooth. Yes, you will need to hard wire speakers to the receiver using speaker wire.
A:AnswerNo, this is a stereo reciever/amp and needs 4 or 2 speakers. If you get a gang box and another speaker indoors then you could set them up on “speakers A”. The outdoor speakers could be on “speakers B”. Then you could play speakers A or B or both. The speakers will need to be modern and not too large for this unit to push all 6
A:AnswerYes you can hook up 4 speakers to this receiver. You should be able then hook up tv to the receiver. I have same setup. However you may need an adapter to get tv sound output to the receiver. In my case, I bought a $15 adapter to use digital optical sound output from tv and convert to rca cables for input into the receiver. I also had to change the sound settings on the tv to switch from tv internal speakers to digital output. So depending on your tv and the outputs on it, you should be able to make it work but may need to adjust tv sound settings and invest in an adapter.
A:AnswerQuoting the user manual-
"The OUT jacks output audio signals of the currently selected input (except when LINE 3 is selected).
Volume level, tone control and balance settings do not affect the OUT jacks"
