Questions & Answers

Q: QuestionDoes this receiver have two zones or one zone?

Asked 3 years ago by Anonymous.

• A:Answer one

  Answered 3 years ago by Hood63

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this receiver work with Bose wireless head phones?

Asked 3 years ago by Jim.

• A:Answer I wouldn't be able to tell you because I do not use headphones

  Answered 3 years ago by rauls1957Verified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionMy Yamaha Natural Sound AV receiver RX-v377 has gone out? Is this the closest possible replacement?

Asked 3 years ago by renee.

• A:Answer The banner specs look almost identical. I think you'd be happy with the RX-V385 as a replacement for the RX-V377.

  Answered 3 years ago by Anonymous

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionCan you hook up a sub woofer to this? I don't see any connection jack on the back for one. I want to get this receiver, but not if I can't use my sub - thanks

Asked 3 years ago by Karl.

• A:Answer Yes I can in of this receiver

  Answered 3 years ago by Anonymous

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (5)

Q: Questionwill it hook. up to sxm, does it have fm/am tuner

Asked 3 years ago by Anonymous.

• A:Answer It has fm/am tuner and will hook up to six.

  Answered 3 years ago by WillVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionCan this work on 230 Volts 50 Hz power supply ? I want to buy and take it to India

Asked 3 years ago by Jagadish.

• A:Answer Yes you just need to select proper voltage in the back of unit

  Answered 3 years ago by AnonymousVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI hooked up everything, speakers have worked,but components are not... my non ARC TV & things were working....then I tried adding my Roku & it worked, but TV stopped....nothing but the AMFM radio is working!! I am about to pack up and return

Asked 3 years ago by CAMM.

• A:Answer You might need to upgrade your HDMI cable. What ever was fine on your old TV may not work with this A/V receiver

  Answered 3 years ago by Hood63

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionSpecs read no phono connection but I see a set of analogue outputs. Can I connect a turntable?

Asked 3 years ago by Desalpro.

• A:Answer You should be able to connect a turntable but you would need to buy a phono preamp to route the input through. They are not that expensive.

  Answered 3 years ago by AnonymousVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionI am looking for a receiver that can play surround-sound speakers inside and have the capability to play outdoor speakers. Does this have A/B speakers for that?

Asked 3 years ago by TyStick.

• A:Answer This AV Receiver is a 5.1 channel surround. No A/B speakers. Can use banana plug connections for surround speakers.

  Answered 3 years ago by VIZIO65Verified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionIs this receiver HDCP 2.2 compliant

Asked 3 years ago by Don.

• A:Answer I know it's hard but try looking under "Specifications" **Digital Content Protection: HDCP 2.2**

  Answered 3 years ago by Hood63

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this work with 3 ohm speakers

Asked 3 years ago by Anonymous.

• A:Answer If the receiver was designed to use a 6 to 8 Ohm speaker, then changing the speaker to a 3 Ohm type will demand more current from the audio amplifier. This might damage the amplifier or cause the sound to be distorted for lack of proper current through the speaker

  Answered 3 years ago by Hood63

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWhen my reciever will not turn on, where do I take it for repairs/ service?

Asked 3 years ago by MicRafone.

• A:Answer only place is to send it back to the company

  Answered 2 years ago by user632151

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWhen using the HDMI input, will the component video output feed a signal?

Asked 3 years ago by Jahnny.

• A:Answer There is no component video output on this device. See specifications. Output Number of Subwoofer Pre Outs 1 Number of HDMI Outputs (Total) 1 Number of HDMI HDCP 2.2 Outputs 1 Number Of Component Video Outputs 0 Number Of Composite Video Outputs 1

  Answered 3 years ago by Hood63

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI am not by any means a die hard audiophile...A rookie at best. Does the Yamaha RX-V385BL have enough power to thump a pair of JBL ND 310's ?? The speakers are 250 watts @ 8 ohms. I have not heard them in 6-7 yrs now. I forgot what they sound like.

Asked 3 years ago by CXurtis.

• A:Answer it will thump my 12inch cerwin vegas the reciever is pushing 145 watts per channel

  Answered 3 years ago by AnonymousVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionCan you use an Amazon Firestick for one of the HDMI plugs to then be sent out to a projector ?

Asked 3 years ago by Jordan.

• A:Answer I tried to do this and was not able to get it to work.

  Answered 3 years ago by DuckVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionCan this Unit play a Flash drive in shuffle mode or random mode?

Asked 3 years ago by Shpwrck.

• A:Answer Yes

  Answered 3 years ago by DaveGVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionCan this unit shuffle USB music from a flash drive?

Asked 3 years ago by Shpwrck.

Q: QuestionDirectv Geni remote will note provide codes for this receiver (RX-V385).

Asked 3 years ago by Anonymous.

• A:Answer usb connections

  Answered 2 years ago by user632151

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionHow do I program to my Directv remote

Asked 3 years ago by Anonymous.

• A:Answer You should be able to call Direct Tv and they will step you through on how to program it also using HDMI cables automatically links up your equipment . It still might not control the volume level though. I still use my Yamaha remote to control the volume because if I ever want to change anything in the programming of the receiver you can still do so through that remote

  Answered 3 years ago by Reo152Verified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this question