audio technica cartridges

Best Buy customers often prefer the following products when searching for audio technica cartridges.

Cartridges are the part of the turntable that holds the record. The stylus (needle) sits in the record groove, and vibrations from the stylus are transferred to a coil of wire (the cartridge) that is connected to an amplifier. This allows you to hear your music. Cartridges are a critical link in the audio chain, and choosing the right one can make or break your listening experience. Here are some of the best cartridges made by Audio Technica.

Audio-Technica - Audio Technica VM740L Microline Nude Stereo Cartridge - Red
Model: AUD VM740ML
SKU: 6409711
Rating 5 out of 5 stars with 3 reviews
Top comment
"An awesome cartridge...This is one of the best affordable Audio Technica quality moving magnet cartridges out there....Very Satisfied. Nice Red version audio-technica VM740ML Cartridge."
See all customer reviews
Product Description
The VM740ML MicroLine® stylus cartridge is a premier 700 Series model in Audio-Technica’s new VM cartridge line – a line that harks back to A-T’s early days as a manufacturer primarily of high-end phono cartridges, while also incorporating today’s advanced technology. Like all VM cartridges, the VM740ML is equipped with dual magnets that are positioned to match the left and right channels in the stereo record groove for outstanding channel separation and extended frequency response. The cartridge’s MicroLine® stylus allows it to trace the record groove with incredible accuracy, resulting in nuanced audio reproduction that elliptical and conical styli simply can’t match. The stylus’s multilevel shape also wears better than other styli, while reducing the wear on your records. Includes mounting hardware.  VM dual magnet cartridge with MicroLine® stylus  Aluminum tapered cantilever  Paratoroidal coils improve generating efficiency  Center shield plate between the left and right channels reduces crosstalk  Die-cast aluminum alloy housing reduces vibration and adds a natural electrical shield - Frequency Response: 20-27,000 Hz - Channel Separation: 28 dB (1 kHz) - Vertical Tracking Force: 1.8-2.2 g (2.0 g standard) - Stylus Construction: Nude square shank - Recommended Load Impedance : 47,000 ohms - Output: 4.0 mV (at 1 kHz, 5 cm/sec) - Channel Balance: 1.0 dB (1 kHz) - Stylus Shape: 2.2 x 0.12 mil MicroLine - Cantilever: Aluminum tapered pipe - Mount: Half-inch - Replacement Stylus: VMN40ML - Coil Impedance: 2,700 ohms (1 kHz) - DC Resistance: 800 ohms - Load Capacitance: 100-200 pF - Coil Inductance: 460 mH (1 kHz) - Static Compliance: 40 x 10-6 cm/dyne - Dynamic Compliance: 10 x 10-6 cm/dyne (100 Hz) - Vertical Tracking Angle: 23° - Dimensions: 17.3 mm (0.7") H x 17.0 mm (0.7") W x 28.2 mm (1.1") D - Weight: 8.0 g (0.3 oz) - Accessories Included: Four cartridge installation screws (5 mm x 2, 10 mm x 2), two washers, two hexagon nuts, non-magnetic screwdriver, brush, lead wire set
See all Cartridges & Styluses
Top comment
"An awesome cartridge...This is one of the best affordable Audio Technica quality moving magnet cartridges out there....Very Satisfied. Nice Red version audio-technica VM740ML Cartridge."
See all customer reviews
Product Description
The VM740ML MicroLine® stylus cartridge is a premier 700 Series model in Audio-Technica’s new VM cartridge line – a line that harks back to A-T’s early days as a manufacturer primarily of high-end phono cartridges, while also incorporating today’s advanced technology. Like all VM cartridges, the VM740ML is equipped with dual magnets that are positioned to match the left and right channels in the stereo record groove for outstanding channel separation and extended frequency response. The cartridge’s MicroLine® stylus allows it to trace the record groove with incredible accuracy, resulting in nuanced audio reproduction that elliptical and conical styli simply can’t match. The stylus’s multilevel shape also wears better than other styli, while reducing the wear on your records. Includes mounting hardware.  VM dual magnet cartridge with MicroLine® stylus  Aluminum tapered cantilever  Paratoroidal coils improve generating efficiency  Center shield plate between the left and right channels reduces crosstalk  Die-cast aluminum alloy housing reduces vibration and adds a natural electrical shield - Frequency Response: 20-27,000 Hz - Channel Separation: 28 dB (1 kHz) - Vertical Tracking Force: 1.8-2.2 g (2.0 g standard) - Stylus Construction: Nude square shank - Recommended Load Impedance : 47,000 ohms - Output: 4.0 mV (at 1 kHz, 5 cm/sec) - Channel Balance: 1.0 dB (1 kHz) - Stylus Shape: 2.2 x 0.12 mil MicroLine - Cantilever: Aluminum tapered pipe - Mount: Half-inch - Replacement Stylus: VMN40ML - Coil Impedance: 2,700 ohms (1 kHz) - DC Resistance: 800 ohms - Load Capacitance: 100-200 pF - Coil Inductance: 460 mH (1 kHz) - Static Compliance: 40 x 10-6 cm/dyne - Dynamic Compliance: 10 x 10-6 cm/dyne (100 Hz) - Vertical Tracking Angle: 23° - Dimensions: 17.3 mm (0.7") H x 17.0 mm (0.7") W x 28.2 mm (1.1") D - Weight: 8.0 g (0.3 oz) - Accessories Included: Four cartridge installation screws (5 mm x 2, 10 mm x 2), two washers, two hexagon nuts, non-magnetic screwdriver, brush, lead wire set
See all Cartridges & Styluses
Your price for this item is $349.00
See all Cartridges & Styluses
Audio-Technica AT33PTG2 Dual Moving Coil Cartridge - Black
Model: AUD AT33PTG2
SKU: 6409710
Rating 5 out of 5 stars with 1 reviewfalse
Top comment
"Excellent cartridge, great value...Also, the screws provided are either too short or too long for a standard Audio Technica shell. Not a big deal, but somewhat annoying to perfectionist eye. :) Overall, this is phenomenal cartridge for the price. "
See all customer reviews
Product Description
The AT33PTG/II dual moving coil cartridge features a Microlinear stylus that, with its small curvature radius, delivers low-distortion, high-range performance, even when playing the inner circumference of a record. The Microlinear stylus, which has an average life span of around 1,000 hours, is mounted on a nude tapered boron cantilever with a double damper for reduced weight and better audio quality. The cartridge’s two coils provide excellent channel separation and are affixed within a strong, lightweight mold made of hard resin to greatly reduce unwanted vibration. The cartridge uses a neodymium magnet and a permendur yoke for dramatically enhanced magnetic energy. The PCOCC (Pure Copper by Ohno Continuous Casting) coils ensure pure audio transmission. - Moving coil cartridge with Microlinear stylus delivers exquisite, full-range audio reproduction - Advanced tapered boron cantilever and reduced coil weight improve the audio quality, particularly in the higher frequencies - Neodymium magnet and permendur yoke dramatically enhance the magnetic energy - PCOCC (Pure Copper by Ohno Continuous Casting) coil enables pure signal transfer - High-separation, wide-response dual moving coil - Strong, rigid housing limits unnecessary vibration - Precision-cast hard aluminum alloy body enhances rigidity and the signal-to-noise ratio - Frequency Response: 15-50,000 Hz - Channel Separation: 30 dB (1 kHz) - Vertical Tracking Force: 1.8-2.2 g (2.0 g standard) - Recommended Load Impedance: More than 100 ohms (when head amplifier is connected) - Output: 0.3 mV (at 1 kHz, 5 cm/sec) - Channel Balance: 0.5 dB (1 kHz) - Stylus Shape: Microlinear - Stylus Type: Nude square shank - Cantilever: Gold-plated nude tapered boron - Mount: Half-inch - Accessories Included: - Non-Magnetic Screwdriver - 2 Washers - 2 Nuts ¬- Cartridge Installation Screws (13 mm × 2, 19 mm × 2) - Plastic Protector - Brush - PCOCC Lead Wire Set - Stylus Curvature Radius: 2.2 x 0.12 mil - Coil Impedance: 10 ohms (1 kHz) - Coil Inductance: 22 µH (1 kHz) - DC Resistance: 10 ohms - Static Compliance: 40 x 10-6 cm/dyne - Dynamic Compliance: 10 x 10-6 cm/dyne (100 Hz) - Vertical Tracking Angle: 23° - Dimensions: 16.0 mm (0.63") H × 16.6 mm (0.65") W × 26.5 mm (1.04") D - Weight: 6.9 g (0.24 oz)
See all Cartridges & Styluses
Top comment
"Excellent cartridge, great value...Also, the screws provided are either too short or too long for a standard Audio Technica shell. Not a big deal, but somewhat annoying to perfectionist eye. :) Overall, this is phenomenal cartridge for the price. "
See all customer reviews
Product Description
The AT33PTG/II dual moving coil cartridge features a Microlinear stylus that, with its small curvature radius, delivers low-distortion, high-range performance, even when playing the inner circumference of a record. The Microlinear stylus, which has an average life span of around 1,000 hours, is mounted on a nude tapered boron cantilever with a double damper for reduced weight and better audio quality. The cartridge’s two coils provide excellent channel separation and are affixed within a strong, lightweight mold made of hard resin to greatly reduce unwanted vibration. The cartridge uses a neodymium magnet and a permendur yoke for dramatically enhanced magnetic energy. The PCOCC (Pure Copper by Ohno Continuous Casting) coils ensure pure audio transmission. - Moving coil cartridge with Microlinear stylus delivers exquisite, full-range audio reproduction - Advanced tapered boron cantilever and reduced coil weight improve the audio quality, particularly in the higher frequencies - Neodymium magnet and permendur yoke dramatically enhance the magnetic energy - PCOCC (Pure Copper by Ohno Continuous Casting) coil enables pure signal transfer - High-separation, wide-response dual moving coil - Strong, rigid housing limits unnecessary vibration - Precision-cast hard aluminum alloy body enhances rigidity and the signal-to-noise ratio - Frequency Response: 15-50,000 Hz - Channel Separation: 30 dB (1 kHz) - Vertical Tracking Force: 1.8-2.2 g (2.0 g standard) - Recommended Load Impedance: More than 100 ohms (when head amplifier is connected) - Output: 0.3 mV (at 1 kHz, 5 cm/sec) - Channel Balance: 0.5 dB (1 kHz) - Stylus Shape: Microlinear - Stylus Type: Nude square shank - Cantilever: Gold-plated nude tapered boron - Mount: Half-inch - Accessories Included: - Non-Magnetic Screwdriver - 2 Washers - 2 Nuts ¬- Cartridge Installation Screws (13 mm × 2, 19 mm × 2) - Plastic Protector - Brush - PCOCC Lead Wire Set - Stylus Curvature Radius: 2.2 x 0.12 mil - Coil Impedance: 10 ohms (1 kHz) - Coil Inductance: 22 µH (1 kHz) - DC Resistance: 10 ohms - Static Compliance: 40 x 10-6 cm/dyne - Dynamic Compliance: 10 x 10-6 cm/dyne (100 Hz) - Vertical Tracking Angle: 23° - Dimensions: 16.0 mm (0.63") H × 16.6 mm (0.65") W × 26.5 mm (1.04") D - Weight: 6.9 g (0.24 oz)
See all Cartridges & Styluses
Your price for this item is $599.00
See all Cartridges & Styluses
Audio-Technica - Audio Technica VM670SP Cartridge For 78 RPM - Gray
Model: AUD VM670SP
SKU: 6409715
Be the first to write a review
Product Description
The VM670SP cartridge is designed for playing 78 RPM records. The VM670SP cartridge is part of the 600 Series in Audio-Technica’s new VM cartridge line – a line that harks back to A-T’s early days as a manufacturer primarily of high-end phono cartridges. The VM670SP cartridge features a specialized body and internal wiring dedicated to monaural sound reproduction, plus a large curvature radius conical stylus. The VM670SP is equipped with dual magnets that are internally connected to reduce record noise and obtain a highly focused “center” sound image that stereo cartridges can’t provide. The stylus’s 3.0 mil curvature radius makes it an excellent choice for playing 78s from a wide variety of eras. Includes mounting hardware.
See all Cartridges & Styluses
Product Description
The VM670SP cartridge is designed for playing 78 RPM records. The VM670SP cartridge is part of the 600 Series in Audio-Technica’s new VM cartridge line – a line that harks back to A-T’s early days as a manufacturer primarily of high-end phono cartridges. The VM670SP cartridge features a specialized body and internal wiring dedicated to monaural sound reproduction, plus a large curvature radius conical stylus. The VM670SP is equipped with dual magnets that are internally connected to reduce record noise and obtain a highly focused “center” sound image that stereo cartridges can’t provide. The stylus’s 3.0 mil curvature radius makes it an excellent choice for playing 78s from a wide variety of eras. Includes mounting hardware.
See all Cartridges & Styluses
Your price for this item is $159.00
See all Cartridges & Styluses
Audio-Technica - Audio Technica AT33SA Dual Moving Coil Cartridge - Silver
Model: AUD AT33SA
SKU: 6409668
Rating 1 out of 5 stars with 1 reviewfalse
Product Description
The AT33Sa is the first Audio-Technica moving coil cartridge to feature a Shibata line-contact stylus, known for its superior high-range performance and strong mid and bass sound. The stylus is mounted on a tapered boron cantilever with a double damper for reduced weight and better audio quality. The cartridge’s dual moving coils provide excellent channel separation and are affixed within a strong but lightweight VC mold to greatly reduce unwanted vibration. The cartridge uses a neodymium magnet and a permendur yoke for dramatically enhanced magnetic energy. The PCOCC (Pure Copper by Ohno Continuous Casting) coils ensure pure audio transmission. - Moving coil cartridge with Shibata stylus delivers exquisite, full-range audio reproduction - Advanced tapered boron cantilever and reduced coil weight improve the audio quality, particularly in the higher frequencies - Neodymium magnet and permendur yoke dramatically enhance the magnetic energy - PCOCC (Pure Copper by Ohno Continuous Casting) coil enables pure signal transfer - High-separation, wide response dual moving coil - VC mold limits unnecessary vibration - Precision-cast hard aluminum alloy body enhances rigidity and the signal-to-noise ratio - Frequency Response: 15-50,000 Hz - Channel Separation: 30 dB (1 kHz) - Vertical Tracking Force: 1.8-2.2 g (2.0 g standard) - Recommended Load Impedance: More than 100 ohms (when head amplifier is connected) - Output: 0.4 mV (at 1 kHz, 5 cm/sec) - Channel Balance: 0.5 dB (1 kHz) - Stylus Shape: Shibata (line contact) - Cantilever: Solid, tapered boron - Mount: Half-inch
See all Cartridges & Styluses
Product Description
The AT33Sa is the first Audio-Technica moving coil cartridge to feature a Shibata line-contact stylus, known for its superior high-range performance and strong mid and bass sound. The stylus is mounted on a tapered boron cantilever with a double damper for reduced weight and better audio quality. The cartridge’s dual moving coils provide excellent channel separation and are affixed within a strong but lightweight VC mold to greatly reduce unwanted vibration. The cartridge uses a neodymium magnet and a permendur yoke for dramatically enhanced magnetic energy. The PCOCC (Pure Copper by Ohno Continuous Casting) coils ensure pure audio transmission. - Moving coil cartridge with Shibata stylus delivers exquisite, full-range audio reproduction - Advanced tapered boron cantilever and reduced coil weight improve the audio quality, particularly in the higher frequencies - Neodymium magnet and permendur yoke dramatically enhance the magnetic energy - PCOCC (Pure Copper by Ohno Continuous Casting) coil enables pure signal transfer - High-separation, wide response dual moving coil - VC mold limits unnecessary vibration - Precision-cast hard aluminum alloy body enhances rigidity and the signal-to-noise ratio - Frequency Response: 15-50,000 Hz - Channel Separation: 30 dB (1 kHz) - Vertical Tracking Force: 1.8-2.2 g (2.0 g standard) - Recommended Load Impedance: More than 100 ohms (when head amplifier is connected) - Output: 0.4 mV (at 1 kHz, 5 cm/sec) - Channel Balance: 0.5 dB (1 kHz) - Stylus Shape: Shibata (line contact) - Cantilever: Solid, tapered boron - Mount: Half-inch
See all Cartridges & Styluses
Your price for this item is $949.99
See all Cartridges & Styluses
Audio-Technica - Audio Technica VM520EB Elliptical Bonded Cartridge - Navy
Model: AUD VM520EB
SKU: 6409689
Be the first to write a review
Product Description
The VM520EB is part of the 500 Series in Audio-Technica’s new VM cartridge line – a line that harks back to A-T’s early days as a manufacturer primarily of high-end phono cartridges, while also incorporating today’s advanced technology. Like all VM cartridges, the VM520EB is equipped with dual magnets that are positioned to match the left and right channels in the stereo record groove for outstanding channel separation and extended frequency response. The cartridge’s 0.3 x 0.7 mil elliptical bonded stylus tracks the record groove with high accuracy for outstanding audio reproduction. Includes mounting hardware. - VM dual magnet cartridge with 0.3 x 0.7 mil elliptical stylus - Aluminum cantilever - Paratoroidal coils improve generating efficiency - Center shield plate between the left and right channels reduces crosstalk - Durable low-resonance polymer housing - Frequency Response: 20-23,000 Hz - Channel Separation: 27 dB (1 kHz) - Vertical Tracking Force: 1.8-2.2 g (2.0 g standard) - Stylus Construction: Bonded round shank - Recommended Load Impedance: 47,000 ohms - Output: 4.5 mV (at 1 kHz, 5 cm/sec) - Channel Balance: 1.5 dB (1 kHz) - Stylus Shape: 0.3 x 0.7 mil elliptical - Cantilever: Aluminum pipe - Mount: Half-inch - Replacement Stylus: VMN20EB - Coil Impedance: 2,700 ohms (1 kHz) - DC Resistance: 800 ohms - Load Capacitance: 100-200 pF - Coil Inductance: 460 mH (1 kHz) - Static Compliance: 35 x 10-6 cm/dyne - Dynamic Compliance: 8 x 10-6 cm/dyne (100 Hz) - Vertical Tracking Angle: 23° - Dimensions (H x W x D): 17.3 x 17.0 x 28.2 mm / 0.7 x 0.7 x 1.1" - Weight: 6.4 g (0.2 oz) - Accessories Included: Four cartridge installation screws (5 mm x 2, 10 mm x 2), two washers, two hexagon nuts
See all Cartridges & Styluses
Product Description
The VM520EB is part of the 500 Series in Audio-Technica’s new VM cartridge line – a line that harks back to A-T’s early days as a manufacturer primarily of high-end phono cartridges, while also incorporating today’s advanced technology. Like all VM cartridges, the VM520EB is equipped with dual magnets that are positioned to match the left and right channels in the stereo record groove for outstanding channel separation and extended frequency response. The cartridge’s 0.3 x 0.7 mil elliptical bonded stylus tracks the record groove with high accuracy for outstanding audio reproduction. Includes mounting hardware. - VM dual magnet cartridge with 0.3 x 0.7 mil elliptical stylus - Aluminum cantilever - Paratoroidal coils improve generating efficiency - Center shield plate between the left and right channels reduces crosstalk - Durable low-resonance polymer housing - Frequency Response: 20-23,000 Hz - Channel Separation: 27 dB (1 kHz) - Vertical Tracking Force: 1.8-2.2 g (2.0 g standard) - Stylus Construction: Bonded round shank - Recommended Load Impedance: 47,000 ohms - Output: 4.5 mV (at 1 kHz, 5 cm/sec) - Channel Balance: 1.5 dB (1 kHz) - Stylus Shape: 0.3 x 0.7 mil elliptical - Cantilever: Aluminum pipe - Mount: Half-inch - Replacement Stylus: VMN20EB - Coil Impedance: 2,700 ohms (1 kHz) - DC Resistance: 800 ohms - Load Capacitance: 100-200 pF - Coil Inductance: 460 mH (1 kHz) - Static Compliance: 35 x 10-6 cm/dyne - Dynamic Compliance: 8 x 10-6 cm/dyne (100 Hz) - Vertical Tracking Angle: 23° - Dimensions (H x W x D): 17.3 x 17.0 x 28.2 mm / 0.7 x 0.7 x 1.1" - Weight: 6.4 g (0.2 oz) - Accessories Included: Four cartridge installation screws (5 mm x 2, 10 mm x 2), two washers, two hexagon nuts
See all Cartridges & Styluses
Your price for this item is $135.00
See all Cartridges & Styluses
Audio-Technica - Audio Technica VM750H Shibata Nude Stereo Cartridge - Brown
Model: AUD VM750SH
SKU: 6409667
Be the first to write a review
Product Description
The VM750SH Shibata stylus cartridge is a premier 700 Series model in Audio-Technica’s new VM cartridge line – a line that harks back to A-T’s early days as a manufacturer primarily of high-end phono cartridges, while also incorporating today’s advanced technology. Like all VM cartridges, the VM750SH is equipped with dual magnets that are positioned to match the left and right channels in the stereo record groove for outstanding channel separation and extended frequency response. The cartridge’s Shibata stylus provides greater surface contact with the record groove than an elliptical stylus does, resulting in the pickup of ultra-high frequencies with less groove stress and distortion. Includes mounting hardware.  VM dual magnet cartridge with with Shibata stylus  Aluminum tapered cantilever  Paratoroidal coils improve generating efficiency  Center shield plate between the left and right channels reduces crosstalk  Die-cast aluminum alloy housing reduces vibration and adds a natural electrical shield - Frequency Response: 20-27,000 Hz - Channel Separation: 30 dB (1 kHz) - Vertical Tracking Force: 1.8-2.2 g (2.0 g standard) - Stylus Construction: Nude square shank - Recommended Load Impedance: 47,000 ohms - Output: 4.0 mV (at 1 kHz, 5 cm/sec) - Channel Balance: 1.0 dB (1 kHz) - Stylus Shape: 2.7 x 0.26 mil Shibata - Cantilever: Aluminum tapered pipe - Mount: Half-inch - Replacement Stylus: VMN50SH - Coil Impedance: 2,700 ohms (1 kHz) - DC Resistance: 800 ohms - Load Capacitance: 100-200 pF - Coil Inductance: 460 mH (1 kHz) - Static Compliance: 40 x 10-6 cm/dyne - Dynamic Compliance: 10 x 10-6 cm/dyne (100 Hz) - Vertical Tracking Angle: 23° - Dimensions: 17.3 mm (0.7") H x 17.0 mm (0.7") W x 28.2 mm (1.1") D - Weight: 8.0 g (0.3 oz)
See all Cartridges & Styluses
Product Description
The VM750SH Shibata stylus cartridge is a premier 700 Series model in Audio-Technica’s new VM cartridge line – a line that harks back to A-T’s early days as a manufacturer primarily of high-end phono cartridges, while also incorporating today’s advanced technology. Like all VM cartridges, the VM750SH is equipped with dual magnets that are positioned to match the left and right channels in the stereo record groove for outstanding channel separation and extended frequency response. The cartridge’s Shibata stylus provides greater surface contact with the record groove than an elliptical stylus does, resulting in the pickup of ultra-high frequencies with less groove stress and distortion. Includes mounting hardware.  VM dual magnet cartridge with with Shibata stylus  Aluminum tapered cantilever  Paratoroidal coils improve generating efficiency  Center shield plate between the left and right channels reduces crosstalk  Die-cast aluminum alloy housing reduces vibration and adds a natural electrical shield - Frequency Response: 20-27,000 Hz - Channel Separation: 30 dB (1 kHz) - Vertical Tracking Force: 1.8-2.2 g (2.0 g standard) - Stylus Construction: Nude square shank - Recommended Load Impedance: 47,000 ohms - Output: 4.0 mV (at 1 kHz, 5 cm/sec) - Channel Balance: 1.0 dB (1 kHz) - Stylus Shape: 2.7 x 0.26 mil Shibata - Cantilever: Aluminum tapered pipe - Mount: Half-inch - Replacement Stylus: VMN50SH - Coil Impedance: 2,700 ohms (1 kHz) - DC Resistance: 800 ohms - Load Capacitance: 100-200 pF - Coil Inductance: 460 mH (1 kHz) - Static Compliance: 40 x 10-6 cm/dyne - Dynamic Compliance: 10 x 10-6 cm/dyne (100 Hz) - Vertical Tracking Angle: 23° - Dimensions: 17.3 mm (0.7") H x 17.0 mm (0.7") W x 28.2 mm (1.1") D - Weight: 8.0 g (0.3 oz)
See all Cartridges & Styluses
Your price for this item is $449.00
See all Cartridges & Styluses
Audio-Technica - Audio Technica AT-VM95SH Dual Moving Magnet Cartridge - Brown
Model: AUD ATVM95SH
SKU: 6409705
Rating 5 out of 5 stars with 4 reviews
Top comment
"Amazing sound quality without being outrageously priced."
See all customer reviews
Product Description
This VM95 Series cartridge with 2.7 x 0.26 mil Shibata stylus fits half-inch mount turntables. The cartridge offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli. - VM95 Series dual magnet cartridge with 2.7 x 0.26 mil Shibata stylus - Aluminum cantilever - Durable low-resonance polymer housing - Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts required - Compatible with any AT-VMN95 replacement stylus - Frequency Response: 20-25,000 Hz - Channel Separation: 23 (dB at 1 kHz) - Vertical Tracking Force: 1.8-2.2 g (2.0 g standard) - Stylus Construction: Nude square shank - Recommended Load Impedance: 47,000 ohms - Output: 3.5 mV (1 kHz, 5 cm/sec.) - Channel Balance: 1.5 dB (1 kHz) - Stylus Shape: 2.7 x 0.26 mil Shibata - Cantilever: Aluminum pipe - Mount: Half-inch - Replacement Stylus: AT-VMN95SH - Coil Impedance: 3.3 k ohms (1 kHz) - DC Resistance: 485 ohms - Load Capacitance: 100 to 200 pF - Coil Inductance: 550 mH (1 kHz) - Vertical Tracking Angle: 23° - Dimensions: 17.2 mm (0.68") H × 18.9 mm (0.74") W × 28.3 mm (1.20") D - Weight: 6.1 g (0.22 oz) - Accessories Included: Two 11 mm installation screws, two 8 mm installation screws, two washers, nonmagnetic screwdriver
See all Cartridges & Styluses
Top comment
"Amazing sound quality without being outrageously priced."
See all customer reviews
Product Description
This VM95 Series cartridge with 2.7 x 0.26 mil Shibata stylus fits half-inch mount turntables. The cartridge offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli. - VM95 Series dual magnet cartridge with 2.7 x 0.26 mil Shibata stylus - Aluminum cantilever - Durable low-resonance polymer housing - Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts required - Compatible with any AT-VMN95 replacement stylus - Frequency Response: 20-25,000 Hz - Channel Separation: 23 (dB at 1 kHz) - Vertical Tracking Force: 1.8-2.2 g (2.0 g standard) - Stylus Construction: Nude square shank - Recommended Load Impedance: 47,000 ohms - Output: 3.5 mV (1 kHz, 5 cm/sec.) - Channel Balance: 1.5 dB (1 kHz) - Stylus Shape: 2.7 x 0.26 mil Shibata - Cantilever: Aluminum pipe - Mount: Half-inch - Replacement Stylus: AT-VMN95SH - Coil Impedance: 3.3 k ohms (1 kHz) - DC Resistance: 485 ohms - Load Capacitance: 100 to 200 pF - Coil Inductance: 550 mH (1 kHz) - Vertical Tracking Angle: 23° - Dimensions: 17.2 mm (0.68") H × 18.9 mm (0.74") W × 28.3 mm (1.20") D - Weight: 6.1 g (0.22 oz) - Accessories Included: Two 11 mm installation screws, two 8 mm installation screws, two washers, nonmagnetic screwdriver
See all Cartridges & Styluses
Your price for this item is $199.99
See all Cartridges & Styluses
Audio-Technica - Audio Technica AT-VM95ML Dual Moving Magnet Cartridge - Red
Model: AUD ATVM95ML
SKU: 6409679
Rating 5 out of 5 stars with 4 reviews
Top comment
"Good sound improvement...There was a noticeable sound improvement when I switched my cartridge from the original. "
See all customer reviews
Product Description
This VM95 Series cartridge with 2.2 x 0.12 mil Microlinear stylus fits half-inch mount turntables. The cartridge offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli. - VM Series dual magnet cartridge with 2.2 x 0.12 mil Microlinear stylus - Aluminum cantilever - Durable low-resonance polymer housing - Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts required - Compatible with any AT-VMN95 replacement stylus - Frequency Response: 20-25,000 Hz - Channel Separation: 23 (dB at 1 kHz) - Vertical Tracking Force: 1.8-2.2 g (2.0 g standard) - Stylus Construction: Nude square shank - Recommended Load Impedance: 47,000 ohms - Output: 3.5 mV (1 kHz, 5 cm/sec.) - Channel Balance: 1.5 dB (1 kHz) - Stylus Shape: 2.2 x 0.12 mil Microlinear - Cantilever: Aluminum pipe - Mount: Half-inch - Replacement Stylus: AT-VMN95ML - Coil Impedance: 3.3 k ohms (1 kHz) - DC Resistance: 485 ohms - Load Capacitance: 100 to 200 pF - Coil Inductance: 550 mH (1 kHz) - Vertical Tracking Angle: 23° - Dimensions: 17.2 mm (0.68") H × 18.9 mm (0.74") W × 28.3 mm (1.20") D - Weight: 6.1 g (0.22 oz) - Accessories Included: Two 11 mm installation screws, two 8 mm installation screws, two washers, nonmagnetic screwdriver
See all Cartridges & Styluses
Top comment
"Good sound improvement...There was a noticeable sound improvement when I switched my cartridge from the original. "
See all customer reviews
Product Description
This VM95 Series cartridge with 2.2 x 0.12 mil Microlinear stylus fits half-inch mount turntables. The cartridge offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli. - VM Series dual magnet cartridge with 2.2 x 0.12 mil Microlinear stylus - Aluminum cantilever - Durable low-resonance polymer housing - Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts required - Compatible with any AT-VMN95 replacement stylus - Frequency Response: 20-25,000 Hz - Channel Separation: 23 (dB at 1 kHz) - Vertical Tracking Force: 1.8-2.2 g (2.0 g standard) - Stylus Construction: Nude square shank - Recommended Load Impedance: 47,000 ohms - Output: 3.5 mV (1 kHz, 5 cm/sec.) - Channel Balance: 1.5 dB (1 kHz) - Stylus Shape: 2.2 x 0.12 mil Microlinear - Cantilever: Aluminum pipe - Mount: Half-inch - Replacement Stylus: AT-VMN95ML - Coil Impedance: 3.3 k ohms (1 kHz) - DC Resistance: 485 ohms - Load Capacitance: 100 to 200 pF - Coil Inductance: 550 mH (1 kHz) - Vertical Tracking Angle: 23° - Dimensions: 17.2 mm (0.68") H × 18.9 mm (0.74") W × 28.3 mm (1.20") D - Weight: 6.1 g (0.22 oz) - Accessories Included: Two 11 mm installation screws, two 8 mm installation screws, two washers, nonmagnetic screwdriver
See all Cartridges & Styluses
Your price for this item is $169.99
See all Cartridges & Styluses
Audio-Technica - Audio Technica VM530EN Elliptical Nude Stereo Cartridge - Orange
Model: AUD VM530EN
SKU: 6409687
Rating 5 out of 5 stars with 2 reviews
Top comment
"Couldn’t be happier- great sound and pickup was fast and easy. Install was a bit tricky- not plug and play as the screws were positioned differently but worked it without too much effort....Easy to install. Awesome sound from my old albums that I’ve had for almost 50 years."
See all customer reviews
Product Description
The VM530EN is a top-end elliptical stylus cartridge in Audio-Technica’s new VM cartridge line – a line that harks back to A-T’s early days as a manufacturer primarily of high-end phono cartridges, while also incorporating today’s advanced technology. Like all VM cartridges, the VM530EN is equipped with dual magnets that are positioned to match the left and right channels in the stereo record groove for outstanding channel separation and extended frequency response. The cartridge’s lightweight 0.3 x 0.7 mil elliptical nude stylus reduces the execution mass of the vibration system, enabling fuller frequency reproduction and less tracking distortion than a bonded stylus. Includes mounting hardware.  VM dual magnet cartridge with 0.3 x 0.7 mil elliptical nude stylus  Aluminum cantilever  Paratoroidal coils improve generating efficiency  Center shield plate between the left and right channels reduces crosstalk  Durable low-resonance polymer cartridge housing - Frequency Response: 20-25,000 Hz - Channel Separation: 27 dB (1 kHz) - Vertical Tracking Force: 1.8-2.2 g (2.0 g standard) - Stylus Construction: Nude round shank - Recommended Load Impedance: 47,000 ohms - Output: 4.5 mV (at 1 kHz, 5 cm/sec) - Channel Balance: 1.5 dB (1 kHz) - Stylus Shape: 0.3 x 0.7 mil elliptical - Cantilever: Aluminum pipe - Mount: Half-inch - Replacement Stylus: VMN30EN - Coil Impedance: 2,700 ohms (1 kHz) - DC Resistance: 800 ohms - Load Capacitance: 100-200 pF - Coil Inductance: 460 mH (1 kHz) - Static Compliance: 35 x 10-6 cm/dyne - Dynamic Compliance: 8 x 10-6 cm/dyne (100 Hz) - Vertical Tracking Angle: 23° - Dimensions (Cartridge): 17.3 mm (0.7") H x 17.0 mm (0.7") W x 28.2 mm (1.1") D - Weight (Cartridge): 6.4 g (0.2 oz) - Dimensions (Cartridge & Headshell): 21.3 mm (0.8") H x 21.0 mm (0.8") W x 60.4 mm (2.4") D - Weight (Cartridge & Headshell): 16.8 g (0.6 oz) - Accessories Included: Four cartridge installation screws (5 mm x 2, 10 mm x 2), two washers, two hexagon nuts, non-magnetic screwdriver, brush
See all Cartridges & Styluses
Top comment
"Couldn’t be happier- great sound and pickup was fast and easy. Install was a bit tricky- not plug and play as the screws were positioned differently but worked it without too much effort....Easy to install. Awesome sound from my old albums that I’ve had for almost 50 years."
See all customer reviews
Product Description
The VM530EN is a top-end elliptical stylus cartridge in Audio-Technica’s new VM cartridge line – a line that harks back to A-T’s early days as a manufacturer primarily of high-end phono cartridges, while also incorporating today’s advanced technology. Like all VM cartridges, the VM530EN is equipped with dual magnets that are positioned to match the left and right channels in the stereo record groove for outstanding channel separation and extended frequency response. The cartridge’s lightweight 0.3 x 0.7 mil elliptical nude stylus reduces the execution mass of the vibration system, enabling fuller frequency reproduction and less tracking distortion than a bonded stylus. Includes mounting hardware.  VM dual magnet cartridge with 0.3 x 0.7 mil elliptical nude stylus  Aluminum cantilever  Paratoroidal coils improve generating efficiency  Center shield plate between the left and right channels reduces crosstalk  Durable low-resonance polymer cartridge housing - Frequency Response: 20-25,000 Hz - Channel Separation: 27 dB (1 kHz) - Vertical Tracking Force: 1.8-2.2 g (2.0 g standard) - Stylus Construction: Nude round shank - Recommended Load Impedance: 47,000 ohms - Output: 4.5 mV (at 1 kHz, 5 cm/sec) - Channel Balance: 1.5 dB (1 kHz) - Stylus Shape: 0.3 x 0.7 mil elliptical - Cantilever: Aluminum pipe - Mount: Half-inch - Replacement Stylus: VMN30EN - Coil Impedance: 2,700 ohms (1 kHz) - DC Resistance: 800 ohms - Load Capacitance: 100-200 pF - Coil Inductance: 460 mH (1 kHz) - Static Compliance: 35 x 10-6 cm/dyne - Dynamic Compliance: 8 x 10-6 cm/dyne (100 Hz) - Vertical Tracking Angle: 23° - Dimensions (Cartridge): 17.3 mm (0.7") H x 17.0 mm (0.7") W x 28.2 mm (1.1") D - Weight (Cartridge): 6.4 g (0.2 oz) - Dimensions (Cartridge & Headshell): 21.3 mm (0.8") H x 21.0 mm (0.8") W x 60.4 mm (2.4") D - Weight (Cartridge & Headshell): 16.8 g (0.6 oz) - Accessories Included: Four cartridge installation screws (5 mm x 2, 10 mm x 2), two washers, two hexagon nuts, non-magnetic screwdriver, brush
See all Cartridges & Styluses
Your price for this item is $199.00
See all Cartridges & Styluses
Audio-Technica - Audio Technica AT-VM95EN Dual Moving Magnet Cartridge - Orange
Model: AUD ATVM95EN
SKU: 6409685
Rating 5 out of 5 stars with 4 reviews
Top comment
"Great Audio-Technica Cartridge...I replaced a vintage Technics turntable cartridge with this Audio-Technica AT-VM95EN and could not be happier. ...Fantastic sound quality and easy install. Used in combination with the Crowley stylus cleaner I get zero pops and crackles. "
See all customer reviews
Product Description
This VM95 Series cartridge with 0.3 x 0.7 mil elliptical nude stylus fits half-inch mount turntables. The cartridge offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli. - VM95 Series dual magnet cartridge with 0.3 x 0.7 mil elliptical nude stylus - Aluminum cantilever - Durable low-resonance polymer housing - Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts required - Compatible with any AT-VMN95 replacement stylus - Frequency Response: 20-23,000 Hz - Channel Separation: 22 (dB at 1 kHz) - Vertical Tracking Force: 1.8-2.2 g (2.0 g standard) - Stylus Construction: Nude round shank - Recommended Load Impedance: 47,000 ohms - Output: 3.5 mV (1 kHz, 5 cm/sec.) - Channel Balance: 2.0 dB (1 kHz) - Stylus Shape: 0.3 x 0.7 mil elliptical - Cantilever: Aluminum pipe - Mount: Half-inch - Replacement Stylus: AT-VMN95EN - Coil Impedance: 3.3 k ohms (1 kHz) - DC Resistance: 485 ohms - Load Capacitance: 100 to 200 pF - Coil Inductance: 550 mH (1 kHz) - Vertical Tracking Angle: 23° - Dimensions: 17.2 mm (0.68") H × 18.9 mm (0.74") W × 28.3 mm (1.20") D - Weight: 6.1 g (0.22 oz) - Accessories Included: Two 11 mm installation screws, two 8 mm installation screws, two washers, nonmagnetic screwdriver
See all Cartridges & Styluses
Top comment
"Great Audio-Technica Cartridge...I replaced a vintage Technics turntable cartridge with this Audio-Technica AT-VM95EN and could not be happier. ...Fantastic sound quality and easy install. Used in combination with the Crowley stylus cleaner I get zero pops and crackles. "
See all customer reviews
Product Description
This VM95 Series cartridge with 0.3 x 0.7 mil elliptical nude stylus fits half-inch mount turntables. The cartridge offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli. - VM95 Series dual magnet cartridge with 0.3 x 0.7 mil elliptical nude stylus - Aluminum cantilever - Durable low-resonance polymer housing - Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts required - Compatible with any AT-VMN95 replacement stylus - Frequency Response: 20-23,000 Hz - Channel Separation: 22 (dB at 1 kHz) - Vertical Tracking Force: 1.8-2.2 g (2.0 g standard) - Stylus Construction: Nude round shank - Recommended Load Impedance: 47,000 ohms - Output: 3.5 mV (1 kHz, 5 cm/sec.) - Channel Balance: 2.0 dB (1 kHz) - Stylus Shape: 0.3 x 0.7 mil elliptical - Cantilever: Aluminum pipe - Mount: Half-inch - Replacement Stylus: AT-VMN95EN - Coil Impedance: 3.3 k ohms (1 kHz) - DC Resistance: 485 ohms - Load Capacitance: 100 to 200 pF - Coil Inductance: 550 mH (1 kHz) - Vertical Tracking Angle: 23° - Dimensions: 17.2 mm (0.68") H × 18.9 mm (0.74") W × 28.3 mm (1.20") D - Weight: 6.1 g (0.22 oz) - Accessories Included: Two 11 mm installation screws, two 8 mm installation screws, two washers, nonmagnetic screwdriver
See all Cartridges & Styluses
Your price for this item is $119.99
See all Cartridges & Styluses