Main Content

Questions & Answers

APC - Back-UPS 1080VA UPS - Black-Front_Standard
Ask a Question
Page 1, showing1-10 of 25 Questions
    • Best answerThank you for your inquiry. The size of the load attached to the UPS impacts the amount of runtime it can provide. With a 65 watt load attached, the BN1080G could run for 108 minutes. However, with a 325 watt load, the runtime decreases to 13 minutes.

      By APCProductSupport 

  • Q: are all outlets on battery backup or are some just regular?  (10 Answers)

    By Anonymous 

    • Best answerThis unit has 4 outputs that are on the battery backup and 4 outlets that are only on surge protection from the power in your house. The outlets that are backed up are also on surge protection when operating on house power.

      By DBinPA 

    • Best answerThank you for your inquiry.The BN1080G contains 2 12 volt 7-7.2 amp hour batteries. It is not designed for use with an external battery bank and this not a configuration we would recommend or support.

      By APCProductSupport 

  • Q: which product can I use to power my sump pump Want to have 4-8 hours of run time for my 1/3 HP pump.  (10 Answers)

    By Wild1Irishman 

    • Best answerThis would be controlled by the amount of times your pump kicks on during that period. That would vary based upon the water table in your area and rainfall. There are DC sump pumps available that will run on a wet cell (car 12volt) battery. That would be a more efficient way to handle your requirement. The pump would always run off the battery and you would use a car battery charger to keep the battery "topped off" and to recharge it fairly quickly if you do run from the battery for a long period of time. If you are subject to frequent, extended outages you might want to consider a deep cycle, marine battery.

      By DBinPA 

  • Q: connectors does this unit have rg6 and cat 5 or 6 protection  (10 Answers)

    By chuck 

    • Best answerYES.

      By BobFred 

  • Q: Where can you download a manual for this unit?  (5 Answers)

    By Jerry 

    • Best answerThank you for your inquiry. I will attach the link to the BN1080G user manual below. http://www.apcmedia.com/salestools/JGNY-8XT6LC/JGNY-8XT6LC_R1_EN.pdf?sdirect=true

      By APCProductSupport 

  • Q: is the POE ethernet connection protected against surge or this device only extend the power time?  (5 Answers)

    By Matt 

    • Best answerThank you for your inquiry. The BN1080G provides data line surge protection for the following: Analog phone line for phone/fax/modem/DSL (RJ-11 connector), Network line - 10/100 Base-T Ethernet (RJ-45 connector), Coaxial cable for CATV/SATV/modem/Audio-Video (coax connector)

      By APCProductSupport 

  • Q: Does this back up us float charging to prevent over charging?  (10 Answers)

    By 7ft Monkey 

    • Best answerThis UPS has a feature called 'AVR' (Automatic Voltage Regulation). AVR is a feature of Line Interactive Topology. With AVR Technology, instead of going to battery during high or low input voltages, the unit will increase (BOOST) or reduce (TRIM) the voltage to a safe operating range. This is achieved by re-routing the input voltage through the internal Automatic Voltage Regulating transformer, all without running off of the internal battery. The main advantage of this is that it helps to prolong the life of the battery and extends the operating range in which the UPS can operate online.

      By jimmywgray 

  • Q: Will this work with active pfc power supplies?  (5 Answers)

    By Anonymous 

    • Best answerThank you for your inquiry. Yes, the BN1080G will work with an active PFC power supply. However, we just need to be sure the solution is sized correctly. If the power supply is rated for 500 watts or higher, we would recommend using one of our Smart-UPS instead.

      By APCProductSupport 

  • Q: can i use this as back up on a small oxygen machine  (10 Answers)

    By Anonymous 

    • Best answerThank you for your inquiry. As a general policy, APC does not recommend the use of any of its products in life support applications. We would recommend contacting the manufacturer of the oxygen machine to see what suggestions they have for supporting their product during a power outage.

      By APCProductSupport 

Best Buy is not responsible for answers provided by Community Answers, Customers, or other third parties. Accuracy not guaranteed. Terms and Conditions