A:AnswerTo get the price point down BB often gets manufacturers to trim costs - easiest is to put a cheaper screen in - without changing the model name - hence the confusion. it's usually a $150 - $250 uplift to upgrade if you went in and configured a system from scratch on some sites - so BB looks like you are getting a huge deal, when you are just getting a good deal.
so gaming on this model will be VERY different than on a real G731GU
A:AnswerDepending on usage, you can expect 3-5 hours of battery life. You can add a 7mm thick 2.5" HDD or SSD. You can upgrade the RAM to a maximum of 2 x 16GB DDR4 2666MHz SODIMM.
A:AnswerIt can accept any of those formats, but the drive must be 7mm thick. Some SSHDs are 9mm thick, please verify the exact product dimensions of your chosen drive.
A:Answerthis screen is were the price cut is taken it has a 250 nit brightness and only 67% sRGB and 50% aRGB so i would not do things like Premiere and after effects. it is good for gaming and watching movies. it also falls short out doors
A:AnswerThe SSD is M.2 form factor, and the HDD needs to be a 2.5" drive with 7mm thickness. You can choose the capacity for both when you choose to upgrade.
A:AnswerBenchmarked the pc got 67% for gaming and 97% for desktop, 75% workstation. I would say you should be able to stream league fine on this laptop.
A:AnswerThat game does not provide "recommended specifications". Based on the "minimum specifications", this laptop should be able to run the game at high settings.
A:AnswerThis is going to a real backlash with returns of these laptops...
Because your page doesn’t list any specifics with regards to model numbers and this page below shows only 140 / 240 Hz for the GU option.
https://www.asus.com/Laptops/ROG-Strix-SCAR-III/Tech-Specs/
A:AnswerYes - depending on the monitor and connection method. For example: Some monitors will have a 144hz display but offer it only through a VGA connection, while limiting HDMI connections to 60hz. Also make sure the laptop is not mirroring the screen and the laptop is set to "second screen only" while connected to the monitor.
