1-3 of 3 Answers
It is 32.75 inches wide with doors closed so it should fit in your 33” opening. However, what you need to check is the depth in the opening so that you would be able to open the doors. This fridge is listed at 35” depth and our opening is 24 inches deep and allows for plenty of room for opening the doors. You need to measure height, width and depth then compare to the specs listed for any refrigerators you are considering. Note that this refrigerator also has a bulky hinge for opening the doors at the top of the fridge which obstructs up to about a foot from the front of the fridge at the top. Measure, measure, and measure then measure again.
Sorry, there was a problem. Please try again later.Hi Debinusa- The refrigerator is 32 3/4" wide. We recommend 1"8" air clearance on each side. We suggest to view Quick Specs at the following link for all product dimensions: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=GNE25JMK_JSK_c2.pdf - Also, we encourage you to view page 19 of the Installation Guide for additional clearance requirements: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=49-60805-1.PDF - Keep in touch! SUE@GEA
Sorry, there was a problem. Please try again later.our opening measured 33" at the top of our old unit so I assumed it was the same at the bottom. turned our not quite but only had to remove the trim on one side and it fit. the wall was not straight.
Sorry, there was a problem. Please try again later.