Audio-Technica - Audio Technica AT-VM95EN Dual Moving Magnet Cartridge - Orange
- Key Specs
- Accessory Type: Turntable Accessory
- Model Compatibility: Audio-Technica Turntables
- General
- Brand: Audio-Technica
- Model Number: AUD ATVM95EN
- Product Name: Audio Technica AT-VM95EN Dual Moving Magnet Cartridge
- Color: Orange
- Features
- Accessory Type: Turntable Accessory
- Quantity: 1
- Compatibility
- Model Compatibility: Audio-Technica Turntables
- Dimensions
- Product Width: 3 inches (The out of box width of the item. Width is measured as the horizontal distance from one side of the item to the other as it would be primarily used or placed.)
- Product Depth: 4 inches (The out of box depth of the item. Depth is measured as the distance from the front of the item to the back as it would be primarily used or placed.)
- Warranty
- Warranty - Parts: U.S. ONE-YEAR LIMITED END-USER WARRANTY
- Warranty - Labor: U.S. ONE-YEAR LIMITED END-USER WARRANTY
- Other
- UPC: 4961310146009
This VM95 Series cartridge with 0.3 x 0.7 mil elliptical nude stylus fits half-inch mount turntables. The cartridge offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli. VM95 Series dual magnet cartridge with 0.3 x 0.7 mil elliptical nude stylus. Aluminum cantilever. Durable low-resonance polymer housing. Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts required. Compatible with any AT-VMN95 replacement stylus.
- Frequency Response: 20-23,000 Hz
- Stylus Construction: Nude round shank
- Recommended Load Impedance: 47,000 ohms
- Stylus Shape: 0.3 x 0.7 mil elliptical
- Cantilever: Aluminum pipe
- Mount: Half-inch
- Accessories Included: Two 11 mm installation screws, two 8 mm installation screws, two washers, nonmagnetic screwdriver
- Frequency Response: 20-23,000 Hz
- Stylus Construction: Nude round shank
- Recommended Load Impedance: 47,000 ohms
- Stylus Shape: 0.3 x 0.7 mil elliptical
- Cantilever: Aluminum pipe
- Mount: Half-inch
- Accessories Included: Two 11 mm installation screws, two 8 mm installation screws, two washers, nonmagnetic screwdriver
Whats Included
- Audio Technica AT-VM95EN Dual Moving Magnet Cartridge
- Audio Technica AT-VM95EN Dual Moving Magnet Cartridge
Product Manuals
Q: What is the audio output connector?
A: They are the red and white cables that come out of the back of your turntable. Plug them in to the back of your amplifier for left and right channel separation.
Q: Will this fit on a Dual 604 turntable?
A: Yes it will.
Q: will this fit a Harmon/Kardon T25 turntable
A: Yes, it will.
