Questions & Answers

Q: QuestionSo in description on page it says 8k and on same page it says 4k. Which one is it.

Asked 1 year ago by Polno.

• A:Answer It’ll support 8k with projectors that do, but will use 4k for any othera

  Answered 1 year ago by AnonymousVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionI have speakers in 3 rooms, a surround sound ceiling speaker setup in the family room and speakers on the lanai/patio. Do I need an amplifier with this AVR? If so, what would you recommend?

Asked 1 year ago by Don.

• A:Answer Hello Don. If you have no more than 7 speakers (not including the subwoofer/s) in the family room, you will not require an external amplifier to power a pair of speakers in another room/zone. You can assign the 'Height 1' speakers to Zone 2 duties. Here is a link to the details: https://manuals.denon.com/AVRX3800H/NA/EN/DRDZSYckfdjdpu.php If you already have nine speakers connected, you can use an external amplifier to connect your Zone 2 speakers using the Zone 2 pre-outs of the AVR-X3800H.

  Answered 1 year ago by Denon Team

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI have a 5.1 speaker sysem in my media room. I have two outdoor speakers. All are wired to the media room. Which receiver will be best for this type of set up. They are not wireless speakers

Asked 1 year ago by outdoor.

• A:Answer Hello! The Denon AVR-X3800H comes with 9 channels of amplification. Two of these channels can be assigned to power outdoor speakers, while two more channels remain available for future use (like Atmos or 7.1) in your media room.

  Answered 1 year ago by Denon Team

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: Questiondoes this work with apple airplay 2?

Asked 1 year ago by bubs.

• A:Answer Yes. It has Apple AirPlay 2

  Answered 1 year ago by AnonymousVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionDoes this model accept external amplifiers?

Asked 1 year ago by JP.

• A:Answer Yes. All the channels have pre out. You can connect them to the external amplifier.

  Answered 1 year ago by AnonymousVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionIs this made in Japan like the AVR-X4800H and AVR-X6800H or elsewhere?

Asked 1 year ago by Frlnce.

• A:Answer Vietnam

  Answered 1 year ago by KeithLVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionDoes it work with a 4k tv?

Asked 1 year ago by Anonymous.

• A:Answer Hope it does. I would like to get a LG G3 65".

  Answered 1 year ago by DennisAVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionHow do I setup kereoke in this receiver? I bought this last year. Thanks

Asked 2 years ago by Devd.

Q: QuestionDoes this support physical wiring of speakers in 4 rooms? I.e. a basement with 4 rooms’ speakers wired into the receiver.

Asked 2 years ago by EMW.

• A:Answer The Denon AVR-X3800H receiver does provide 9 channels of amplification. One option is to power 7 channels dedicated to the main surround system and use the extra two channels for Zone Two. Max number of wired zones from the 3800H is 2. Suggestions for adding additional zones, 1. Use a speaker selector box from the Zone Two speaker terminals. A speaker selector box safely distributes the receiver's power to the four rooms. Individual volume can be accomplished either by local in-wall volume controls or a speaker selector box with volume control ability. 2. An external multi-channel amplifier can be connected to the Zone Two pre-output section. 3. HEOS, the Denon AVR-X3800H has HEOS. Up to 32 wireless zones can be accomplished with HEOS. Please check out our Denon Home (HEOS speakers) selection.

  Answered 2 years ago by Denon Team

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionDoes this Denon receiver play music?

Asked 2 years ago by Genius99.

• A:Answer Yes it as am fm radio functions.

  Answered 1 year ago by DennisAVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionI have 5 rooms with 2 speakers each and I also have a room with KEF 5 speaker surround system. I would like to hook up a Sonance 6 pair speaker selector with volume control to a Denon receiver to run all the rooms. Which Denon receiver would work best?

Asked 2 years ago by Denon.

• A:Answer Seems like what your sharing to the rest of the house is just two channel audio. So you could have basically any receiver that supports a Zone 2 (they all do these days). Receiver powers your Home theatre setup and the Zone 2 stereo output goes over to your Sonance which then presumably powers your other home audio. If your planning on the Denon receiver actually powering all of those channels going to all your rooms…that’s not the way to go about it. The output from Zone 2 should go to a separate and dedicated multichannel amp for home audio. Sonance certainly makes amps like that.

  Answered 2 years ago by BubbaSparks

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWhen will the Denon avr x3800h be back in stock?

Asked 3 years ago by Osbrooks.

• A:Answer The sooner the better

  Answered 2 years ago by JudyMVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionCan I play old dvds and old vhs taped?

Asked 1 year ago by Butch.

• A:Answer Hello, Unfortunately, the AVR-X3800H does not have the necessary inputs for a VHS player or an older DVD player. In order to connect a VHS deck and an older DVD player, we recommend considering the AVR-X4800H as it has the analog video inputs (component and composite) required, and can then upconvert the signal to an HDMI feed to a modern flat screen TV. The necessary analog (VHS) and digital (DVD) audio inputs are also found on the AVR-X4800H.

  Answered 1 year ago by Denon Team

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionSo this receiver has 4 spots for 4 subs. Can I have all 4 subs in one room or can I only have 2 subs in two different rooms?

Asked 2 years ago by Will.

• A:Answer The four subs provide subwoofer placement within the main room. Sub 4 may also be used for a tactile transducer (Rump Shaker).

  Answered 2 years ago by Denon Team

  Helpful (1)Unhelpful (1)ReportAnswer this questionShow more answers (1)

Q: QuestionThe Denon model 4700H can convert composite and component input to HDMI and as a result you can have the analog to HDMI pass through for legacy equipment. Does the X3800H have this feature as well?

Asked 3 years ago by Joe.

• A:Answer Just realized there are no analog inputs on this device; composite, component, etc., so the pass through is not an option.

  Answered 3 years ago by Anonymous

  Helpful (4)Unhelpful (0)ReportAnswer this questionShow more answers (2)