A:AnswerYou can choose to leave screen illuminated always on or to go off until you touch the screen to have it come back on when needed and then will go off again. Also can choose multiple colors for the screen.
A:AnswerThe Honeywell Smart Color Thermostat does not have a fan scheduling option; however, it does have a "circulate" mode, which will run the fan randomly 35% of the time each hour. Hope this helps!
A:AnswerHi Kilmichael! You can set the Resideo Honeywell Home Smart Color Thermostat's backlight to 0 which should be completely black when it's not in use. To set this on the thermostat, tap Settings > Preferences > Backlight > Set to 0. You can test it from this screen as well to see if that's how you would like it. We hope this was helpful!
A:AnswerHi Newbie!
Thanks for reaching out, in a four wire application you do have the option to preform the G-wire solution, this is where you will utilize one of your other wires for power, please see the following how to video;
https://www.youtube.com/watch?v=TT4vbK1K1wo
A:AnswerHi Jyhawk, this can thermostat can work with most zone panel. Please ensure the zone control is 24 volts and provides a common (C) terminal for the thermostat. You will need a thermostat for each zone you would like to control remotely. If you need additional assistance feel free to contact us at 1-855-733-5465
A:AnswerE and W2 wires are connected to the W2-AUX/E terminal together.
In the south where I live E is for emergency heat and W2 is for second stage heat. Hope this helps.
A:AnswerHey Renter! Thanks for reaching out to us with this. We would be happy to help you get your Honeywell Smart Color Wi-Fi Thermostat unregistered from the previous user. At your convenience, give us a call at 1-855-733-5465 when you are onsite with the thermostat and we'll go through the unregistration process with you. It can take between 20-40 minutes and once it's complete you'll be able to get the thermostat registered to your account. We hope this helps!
A:AnswerHi Mark! The THP9045A Wire Saver Module can work with the Honeywell - Smart Color Thermostat with Wi-Fi Connectivity - Silver. This module will allow this thermostat to have a common wire needed to power the thermostat. The module will come with instructions to install with our WiFi thermostats. Have a great day!
A:AnswerHello! I will be happy to assist you with the wiring of your Honeywell Smart Color Thermostat with Wi-Fi Connectivity. If you have a heat only system, the two wires coming from your heating system should be connected to the R and W terminals on the thermostat. The two additional wires coming from the separate transformer should be connected to the RC and C terminals on the thermostat. For further assistance with wiring your new thermostat, please feel free to contact Honeywell Technical Support at (800) 468-1502. Thank you.
A:AnswerHi Steveo, when the fan setting is set to automatic the system fan will only turn on when the thermostat is making a call for heat or cool. You can also adjust the mode option to off by selecting the mode tab on the top of the screen. -Joey
A:AnswerHi MommaMandy, great question. You can control up to 250 thermostats on the Total Connect Comfort app which you would register this thermostat to. If you ever have any questions, please feel free to reach out to us on Facebook/Twitter with a private message. We look forward to hearing from you soon. -Paul
A:AnswerHi Sandy, this thermostat has a jumper loop that makes the connections between R and Rc terminals. This jumper loop is located below the Rc and R terminals on the left. If your previous thermostat had the jumper between R and Rc you have to keep the jumper loop on this thermostat. - Maria
