“When installed, what is the height from the base to the top of unit (with no feet used, only spacers). The manual says the max height is 51 3/16, but I am not sure if that is with feet. When I measure (with no feet, only spacers), I get around 50.5.”
Answer This Question
1-4 of 4 Answers
Ryan, we've included the link for the Dimensions Guide below. Hopefully this information is beneficial to you. Thank you for your inquiry regarding our KitchenAid appliances! https://shared.whirlpoolcorp.com/assets/pdfs/literature/Dimension%20Guide%20-%20W10725670-D-UN.pdf
Sorry, there was a problem. Please try again later.I did not use the feet when installing our oven! The opening was 50 and 1/2 inches high! I only used the plastic bumper or pad that came on it! Working fine I found no issues this way! Didn’t want or need any additional height! The feet or inserts would have raised the oven and I didn’t want the added height!
Sorry, there was a problem. Please try again later.I have 50 3/4 clearance from the base of my cabinet cut out (where the stove will sit) to the bottom tip of the cabinets above where the stove will be placed. I’m trying to see if there is enough clearance to open the cabinet doors above the stove.
Sorry, there was a problem. Please try again later.The Max Height number is for the front of the unit, which is the part you'll see after installation. I'm not clear where you are going with this, but the feet are there to allow you to raise the unit if you have a cutout opening taller than 50 7/16". If the cutout height is between 48 7/8" and 50 7/16" you don't need the feet. I made my opening the recommended height of 50 1/4" and it was perfect. Much less than that and I think it will be hard to push the oven in and keep the flex conduit out of the way. Hope that helps!
Sorry, there was a problem. Please try again later.
