A:AnswerThat is how we mounted it. You have to unscrew the blower fan and rotate it so that it blows toward the duct that carries the exhaust toward the top front vents of the microwave which will vent back into the kitchen. Not hard at all, just read and follow the install instructions.
A:AnswerThe minimum recommended height of the cabinet above the range to which the Microwave would be attached is 30", which would place the bottom of the ME16H702SES approximately 13" above the cook top.
Thanks for the question,
Ms. Samsung
A:AnswerYes, the ME16H702SEB comes with the mounting hardware (including brackets and bolts), as well as templates, filters and instructions needed to install it.
Thanks for your interest,
Ms. Samsung
A:AnswerThanks for the question. The ME16H702SEW doesn't have a "zero-radius" hinge, so it would need approximately a 1/2" clearance on the side for the door to swing open.
- Ms. Samsung
A:AnswerWe had the same problem! Finally, we figured out that you have to take the vent looking panel off that's at the top when the door is open. The charcoal filter sits on a slant in the center section inside of there. Getting the panel on/off was kind of tricky because you have to work around the open door.
A:AnswerI don't recall the dimensions but as long as they are within like 1/8 of an inch, I know ours wasn't exact but it worked. The handle is metal and the hardware to hang it comes with it in the box. Our 2009 GE microwave hardware did not match the holes at all and we just took the old stuff down and installed the new stuff.
A:AnswerThe exhaust fan vents out on the top above the door. There’s a grill that the air is pulled through from the bottom filters and out through the top front. This feature is also handy when mounting under a flush cabinet with no exhaust piping in place.
