Black Friday is hereShop new DoorbustersShop now

Main Content

Questions & Answers

Your price for this item is $749.99
The comparable value price is $1,049.99
Page Showing 1-20 of 83 questions
  • QuestionHow long can I use the SA-RS5 rear speakers on battery power?

    • Answer The SA-RS5 speakers can be used for up to 10 hours with the internal battery.
    This question and answer was generated by AI based on customer and product data.
  • QuestionHow many wireless subwoofers can I connect to this receiver?

    • Answer You can connect up to two of the same model Sony SA-SW5 or SA-SW3 subwoofers to this receiver.
    This question and answer was generated by AI based on customer and product data.
  • QuestionWhat is the wattage per channel for this Sony receiver?

    • Answer This receiver has 120 watts per channel.
    This question and answer was generated by AI based on customer and product data.
  • QuestionHow many audio zones does the receiver have?

    • Answer The receiver has 3 audio zones.
    This question and answer was generated by AI based on customer and product data.
  • QuestionCan I connect this receiver to my Sonos system?

    • Answer Yes, this receiver is "Works with Sonos" compatible.
    This question and answer was generated by AI based on customer and product data.
  • QuestionDoes this Sony receiver support Apple AirPlay?

    • Answer Yes, the STR-AN1000 supports audio streaming via Apple AirPlay 2.
    This question and answer was generated by AI based on customer and product data.
  • QuestionCan I connect wired front speakers to this receiver if I am using wireless rear speakers?

    • Answer Yes, you would need to connect your wired front left and right speakers before connecting the wireless rear speakers.
    This question and answer was generated by AI based on customer and product data.
  • QuestionHow many watts per channel?

    Asked by JoeyT.

    • Answer This question is more complicated than one might expect. The Sony website spec states: 100W into 2 channels driving two 6ohm speakers. Since most (not all) speakers are 8 ohm-speakers, the power output of the AN1000 driving 8 ohm speakers would be more like 85W/channel into 2 channels. The complication comes when people assume the statement on the box: 165W x7 means 165W/per ch (7 ch). This would have to be more like 165W spread out over 7 channels. Basically, 165W shared across all active channels. Keep in mind: Surrounds and height channels do not need quite as much power as your fronts and are often smaller speakers. Also: The lion's share of power-demand comes from bass which for most people will be a powered sub-woofer with its own 100W amplifier built into it. Now that's out of the way, sound quality should not be measured in watts. There is so much more to sound quality than how many watts the amp is rated at. If you have a large room and plan to host parties with loud music, then you might need more power. If you are watching movies in a normal size living room all 7 ch. driven, I feel comfortable saying you will be quite happy with this receiver. I purchased the AN1000 a couple of days ago to replace my aging (legendary) Sony DN1080 which I have loved the past 10+ years. The AN1000 is an improvement in many ways, but the number of watts per channel are rated exactly the same: 100W X 2 into 6ohms.

      Answered by MrChuck

  • QuestionCould this be used for a 5.1.2 setup? How do you assign the speakers to be height channels?

    Asked by EDEric.

    • Answer Hi EDEric, Thank you for your question. Yes. This can be used a s 5.1.2 setup. Please check the Speaker configuration and speaker pattern settings on pages 21-22 for more details: https://www.sony.com/electronics/support/res/manuals/5037/b33415fde106bb6d2fc890a4347b078d/50370281M.pdf Experience breathtaking 8K video and immersive 3D audio with our new 7.2-channel 8K receiver. Enjoy space-filling sound from your 7.2 or 5.2.2 setup with Dolby Atmos® and DTS:X.® It’s easy to enjoy all your content with Works with SONOS, Chromecast Built-in, Apple AirPlay®, and Spotify Connect—all via Wi-Fi or Bluetooth®. Regards, Erin

      Answered by SonyListens

  • QuestionDoes the RCA upscale inputs such as a Wii and a PS2? Or would it be better to buy something that upscales it and then put it in through HDMI?

    Asked by Neel.

    • Answer Hi Neel, Great question! The STRAN1000 will not upscale RCA input. You would have to use an HDMI Cable from the device. We can't guarantee that third party adapters will work correctly with the product. Hope this helps. Erin Experience breathtaking 8K video and immersive 3D audio with our new 7.2-channel 8K receiver. Enjoy space-filling sound from your 7.2 or 5.2.2 setup with Dolby Atmos® and DTS:X.® It’s easy to enjoy all your content with Works with SONOS, Chromecast Built-in, Apple AirPlay®, and Spotify Connect—all via Wi-Fi or Bluetooth®.

      Answered by SonyListens

  • QuestionWhich antenna do I use to get better radio station selection?

    Asked by Vee.

    • Answer This unit only has an antenna for the FM stations. It's the standard plug in wire, about 3 ft long.

      Answered by Harold

  • QuestionSince the Sony STR-AN1000 receiver doesn’t have a phono input and my turntable doesn’t have a built-in preamp, what will I need to enable these two to work together?

    Asked by Need2knowATL.

    • Answer You need to buy a pre-amp for your phono and plug the output of that to one of the audio inputs (Aux). Pre amps are pretty cheap these days.

      Answered by RaviR

  • Questionwill all of the receiver functions on the Sony STR-AN1000 work with my harmony logitech remote control

    Asked by brimusic.

    • Answer No they won't. The Harmony database identifies the an1000 but the IR codes it uses don't work. You can setup the harmony by having the hub learn the an1000 inputs and then you will have basic power and volume and input controls - but that is all.

      Answered by khbcal

  • QuestionI need to replace an Onkyo 5.2 unit that has a Zone 2 to feed audio into a speaker switchbox for speakers throughout the house. Does this unit do that?

    Asked by LastBuyFromBestBuy.

    • Answer The AN1000 actually has 3 zones. Go to the Sony website and download the user manual to learn how it works and see if it will work for your setup.

      Answered by MrChuck

  • QuestionMy current unit just bit the dust(str-dn1060). Will this unit operate front channel A and B? Similar to the 1060 model.

    Asked by Keptman.

    • Answer Yes

      Answered by Anonymous

  • QuestionWhen I switch from watching cable tv to streaming (example Netflix) there is no sound unless I switch to “MAIN” and audio is played via tv speakers only, nor surround sound external speakers. How do I set up so I can watch streaming services with surro?

    Asked by Kevin.

    • Answer Hi Kevin, thanks for contacting Sony. We apologize for the inconvenience you are experiencing; it appears to be a CEC issue. We can attempt the following steps to resolve the problem: Handshake: 1. Disconnect the receiver from the back of the TV, as well as from all devices connected to both the TV and the receiver. 2. Unplug the TV and the receiver from the wall outlet for approximately two minutes. 3. Reconnect the TV and receiver to the wall outlet. 4. Connect the receiver to the TV. 5. If you are using a Sony TV, please check the BRAVIA Sync settings to ensure the receiver is powered on and appears on the sync list. Additionally, confirm the BRAVIA Sync settings on the receiver. 6. Reconnect your devices to the receiver one at a time to check for functionality. If the issue persists, we recommend contacting our support line, where our agents can gather more information and assist you further. You can find our contact options at the following link: https://us.esupport.sony.com/support/s/support-contact?language=en_US&category=ht Thank you for your interest in Sony products! Gus, Sony North America Customer Support

      Answered by SonyListens

  • QuestionCan you plug in a cable box, apple 4k and a 4k BluRay player into this receiver and then output video to a 4k TV on one HDMI out and use the 2nd HDMI out to send audio to a soundbar? Will the audio be high quality like Dolby ATMOS like the source?

    Asked by Kato.

    • Answer Hi Twin, Thanks for the inquiry. You can connect your cable box, Apple 4K, and Blu-ray player to the receiver, allowing you to output video to your 4K TV. Be sure to utilize the ARC ports on both your TV and receiver for optimal performance. Unfortunately, it is not possible to connect a soundbar, as both the receiver and the soundbar operate as standalone devices. However, you can expect high-quality sound from your receiver regardless. Hope this helps. Regards, -Craig

      Answered by SonyListens

  • QuestionIs this Compatible with Sonos port streamer?

    Asked by G.

    • Answer Hi G, Thank you for your inquiry. Yes, you can connect Sonos Port to STRAN1000 and use the product without any issues as this receiver is designed to support Sonos. Hope this helps. Regards, Jess

      Answered by SonyListens

  • QuestionCan I use airplay 2?

    Asked by Easygoing.

    • Answer Hi Easygoing, thank you for your question. The receiver is compatible with AirPlay 2. You can select music content on an iOS device such as iPhone, iPad, and iPod touch and stream it to the unit. Experience breathtaking 8K video and immersive 3D audio with our new 7.2-channel 8K receiver. Enjoy space-filling sound from your 7.2 or 5.2.2 setup with Dolby Atmos® and DTS:X.® It’s easy to enjoy all your content with Works with SONOS, Chromecast Built-in, Apple AirPlay®, and Spotify Connect—all via Wi-Fi or Bluetooth®. Regards, Erin

      Answered by SonyListens

  • QuestionMust all the speakers have the same ohm rating?

    Asked by Crash7.

    • Answer Hi Crash7, thank you for your question. Ohms is a rating that refers to the restriction of power, or impedance. The higher the ohm rating, the more impedance is applied to the flow of power. Most home receivers and speakers are rated 4, 6 or 8 ohms. The exact rating can be found on the unit. When matching speakers and Audio/Video (A/V) receivers, the ohm rating of the speaker should be equal to or greater than the ohm rating of the receiver. The STRAN1000 supports 6 ohms, 1 kHz, 1ch, THD 0.9%. Experience breathtaking 8K video and immersive 3D audio with our new 7.2-channel 8K receiver. Enjoy space-filling sound from your 7.2 or 5.2.2 setup with Dolby Atmos® and DTS:X.® It’s easy to enjoy all your content with Works with SONOS, Chromecast Built-in, Apple AirPlay®, and Spotify Connect—all via Wi-Fi or Bluetooth®. Regards, Erin

      Answered by SonyListens