Questions & Answers

Q: QuestionDoes this receiver have a phono input for a turntable?

• A:Answer No, this receiver does not have a phono input.

Q: QuestionHow many channels does this Yamaha receiver have?

• A:Answer This Yamaha receiver has 5.2 channels.

Q: QuestionWhat type of surround sound does this receiver support?

• A:Answer This receiver supports Dolby TrueHD surround sound.

Q: QuestionWhat is the wattage output per channel for this receiver?

• A:Answer This receiver outputs 8 watts per channel at 6 ohms.

Q: QuestionDoes this receiver support wireless multi-room audio?

• A:Answer Yes, this receiver supports wireless multi-room audio through Yamaha's MusicCast technology.

Q: QuestionAny update on the Xbox Series x 120hz issue?

Asked 4 years ago by Gerarld.

• A:Answer No update, currently the HDMI 2.1 issue has NOT been resolved and the way things are looking... it may never be fixed properly. It's been over a year and the hdmi 2.1 issues haven't been fixed, so not a good sign there and Yamaha is dead silent on the issue. Their current "fix" if you even want to call it that is to plug the console directly into a 4K/120hz display and use eARC to send audio back to receiver. For me this defeats the purpose of even spending the money on or buying a HDMI 2.1 receiver however. So it's not a fix. It's a work around that isn't acceptable imo when a company is selling and advertising their product as HDMI 2.1. I'm still holding out for a proper solution before i even consider buying any HDMI 2.1 receiver at this point... looks like 2021 models are using the same chip as well. Which means if no software fix is discovered.... we won't have a proper HDMI 2.1 receiver until 2022 at the earliest.

  Answered 4 years ago by Knowwit

  Helpful (17)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionHow many watts a channel or total watts does this receiver make. Thanks

Asked 5 years ago by Dee.

• A:Answer 80 watts per channel into 8 ohms (20-20,000 Hz) at 0.06% THD, with 2 channels driven

  Answered 5 years ago by LLeed

  Helpful (13)Unhelpful (5)ReportAnswer this question

Q: QuestionCan Speaker Sets A and B be set to different volume levels and/or different inputs while playing at the same time? A+B receivers have not done this in the past, you always have to get a Zone2 receiver for that functionality - checking if that has changed.

Asked 5 years ago by e210.

• A:Answer The receiver can adjust volume in zones A & B individually or one volume applies to both. See page 127 of the User Guide.

  Answered 5 years ago by macindigo

  Helpful (8)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionIs this model Bluetooth capability

Asked 4 years ago by Bluetooth.

• A:Answer Yes, this model has Bluetooth capability.

  Answered 4 years ago by CarolynVerified Purchase

  Helpful (6)Unhelpful (0)ReportAnswer this question

Q: QuestionHow many total watts of power does this reciever have? I'm comparing to the Sony - STRDH590 - 725W 5.2-Ch at the same price.

Asked 2 years ago by Dugan.

• A:Answer Referring to the specs for both, in the back of their manuals: Two channels driven: RX-V4A: 80W/ch @ 0.06% THD 90W/ch @ 0.9% THD STRDH590: 90W/ch @ 0.09% THD 105W/ch @ 0.9% THD Rated power consumption: RX-V4A: 520W STRDH590: 200W They're pretty comparable, though the rated power consumption should shed some light on how much total (across all channels) the receivers can put out. There's no way to get 725W out and only 200W in. The THD numbers may be important to you. The larger the number, the more distorted the sound.

  Answered 1 year ago by steelclawVerified Purchase

  Helpful (4)Unhelpful (0)ReportAnswer this question

Q: QuestionIs this receiver 110 or 220 volts please? Or multivoltage?

Asked 3 years ago by Nigri.

• A:Answer Model RX-V4A TSR-400 is 120 volts. Mine was purchased in NYC. I have no idea if Yamaha makes this model for other markets where 220 volts might be the norm.

  Answered 3 years ago by nonaneVerified Purchase

  • 
  Helpful (3)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionI have a new 65 in LG tv that doesn't have the ports for yellow and red plugs. I have an old Yamaha htr-5230 receiver. I also have speakers in my wall and ceiling for surround. This receiver isn't compatible w tv. What receiver do I need to get?

Asked 1 year ago by HeatherO.

• A:Answer Modern TVs pass audio digitally out one of the HDMI inputs to an attached receiver. This feature is called ARC, and the enhanced version that can carry more than 2 channels of uncompressed digital audio is called eARC. If the new LG was made recently, it will support ARC and eARC, and you'll probably want a receiver that supports eARC. The RX-V4A handles both. If the LG can handle 4k@120Hz signals, save yourself some headache and grab a $15 8K HDMI cable for eARC. You'll be able to plug in 8K and 4K HDMI sources (game consoles?) to either the TV or receiver and enjoy 5.1 uncompressed audio. NOTE: The TV may have a digital out via something called Toslink or SPDIF. Don't bother with this. HDMI adds a feature called CEC which allows you to control the volume, power status, and inputs of the receiver using the TV remote. Toslink doesn't do this.

  Answered 1 year ago by SteelclawVerified Purchase

  Helpful (2)Unhelpful (0)ReportAnswer this question

Q: QuestionIf I have a 5 disk-CD player, a DVD player, a DVD & Old style large tapes (VHS) combination, a turn table, 4 speakers, sub wolfer and smart tv, what size receiver would I have to get those connected and have a AM FM Radio? Have Yamaha not enough

Asked 3 years ago by Lucky.

• A:Answer Yamaha - RX-V4A 5.2-channel AV Receiver with 8K HDMI and MusicCast - Black You can connect all that to this without breaking the bank and enough power to rock your house

  Answered 2 years ago by JermaineDVerified Purchase

  Helpful (2)Unhelpful (0)ReportAnswer this question

Q: QuestionCan I hook up my older turntable

Asked 3 years ago by Thom.

• A:Answer There are audio input jacks on the back, but the manual doesn't say what signal levels are OK.

  Answered 3 years ago by poorinstallVerified Purchase

  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (3)

Q: QuestionDoes this unit work with a wired 5 unit plus subwoofer Speaker system

Asked 3 years ago by Brent.

• A:Answer Yes that’s how my system is set up

  Answered 3 years ago by MarkMI

  Helpful (2)Unhelpful (0)ReportAnswer this question

Q: Questionis yamaha -rx-v4a AV RECEIVER COMPATIBLE WITH MY TV LG55SM9010P LA

Asked 4 years ago by Anonymous.

• A:Answer Yes. This receiver is compatible with all TV’s that have HDMI.

  Answered 4 years ago by RefrigeratorVerified Purchase

  Helpful (2)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionDOES THIS RECEIVER HAVE AM FM RADIO

Asked 5 years ago by joe.

• A:Answer By definition, a receiver includes a power amp, pre-amp, and tuner. To listen to AM or FM broadcasts, ensure an appropriate antenna is connected to the unit, select tuner as the input, select desired band (AM or FM), and tune to the desired station. The owner's manual is readily downloadable if you have further questions.

  Answered 5 years ago by FreeTruth

  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionIs there an app for Iphone that can control his receiver? My receiver would be in closet and would like to be able to control via an app on my phone for music in another room.

Asked 2 years ago by SteveS.

• A:Answer Yes. The Yamaha MusicCast app lets you control the Receiver via the App.

  Answered 2 years ago by ProfCJVerified Purchase

  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionMy tv only had one hdmi arc and three other hdmi ports. If I get a soundbar, how should the connection be? Do I connect the receiver or soundbar to the TV hdmi arc?

Asked 2 years ago by Bravobest.

• A:Answer It depends on the connections you have on the sound bar. Some sound bars may only have Optical cable or RCA cables. I assume you don't have a surround system, if you are looking for a sound bar. The sound bar should be connected directly to the TV,

  Answered 2 years ago by GilbertVerified Purchase

  Helpful (1)Unhelpful (0)ReportAnswer this question