A:AnswerIt will but note that the stylus overhang for the AT-VM95C/H comes set at 15.5mm and the overhang specified in Technics SL23 documentation is 14mm so you may want to back the cartridge up 1.5mm.
A:AnswerNo, it will not. You must use the ANGLED headshell that was provided with your AT-LP3 Turntable. Get the AT-VM95E Cartridge (cartridge only) instead.
A:AnswerIt will not. You can use the cartridge itself, the AT-VM95E, but not the headshell. Your turntable has a straight tonearm and an angled headshell, you must use the Sony angled headshell.
A:AnswerIt will fit but is not the best match for the tonearm in terms of cartridge suspension compliance. If you replaced the headshell with one of a lighter weight, say this 6.7-gram model available from Parts Express, Part #230-010 the compliance would be better suited to the lighter effective mass of the tonearm assembly.
A:AnswerIt will, but please note a couple of things, you will need to adjust the stylus overhang distance from 15.5mm, which it comes preset at, to 14mm which is the distance specified for your tone arm and make certain that you are NOT using any sub-weight in the end of your tonearm. The cartridge + headshell weight range for your tonearm without a sub-weight is 11 to 16.5g. The AT-VM95E/H Headshell Cartridge combo kit weighs 15.5g.
A:AnswerThe AT-VM95E/H Headshell/Cartridge Combo Kit may be used in place of your existing headshell/ATP-2 Cartridge (with AT-N2 Stylus). Make sure you recalibrate (balance and zero out) your tonearm and set the tracking force (stylus pressure) accordingly after installing the AT-VM95E/H.
A:AnswerNo, it will not. The cartridge itself is not replaceable, it is an integral part of the tonearm. Only the stylus assembly can be replaced and it should be replaced with the same model stylus, the ATN3600L Replacement Stylus.
A:AnswerYou can use the AT-VM95C cartridge, but not the headshell which comes with the AT-VM95C/H Headshell/Cartridge Combo Kit. Your turntable features a straight tonearm so you are required to use the angled headshell that was provided with it.
A:AnswerIt will not. You can use the cartridge itself, the AT-VM95C, but not the headshell that comes with the AT-VM95C/H Headshell/Cartridge Combo Kit. Your turntable has a straight tonearm and an angled headshell, you must use the Denon angled headshell.
A:AnswerIt will not, not the headshell anyway. You may use the cartridge only, the AT-VM95EN, but you must use the Dual headshell and Dual cartridge mounting plate.
A:AnswerYou may use the AT-VM95C Cartridge on the existing MCS headshell, but we cannot confirm that the AT-VM95C/H Headshell/Cartridge combo Kit will work on the MCS tonearm. The provided counterweight would need to have the ability to counterbalance a total of 15.5 grams (combined headshell + cartridge weight).
