A:AnswerI have the recirculating exhaust. it comes out the top and exits along the openings (crevices) along the body of the microwave. If you use the external exhaust option, you need a vent hole to the outside of the house. Note that the fans are rotated differently for the two options.
Good luck and happy heating.
A:AnswerMine is not open. I think you are missing a plate that fits right behind the door on the main body. I runs the length of the micro from right to left.
A:AnswerYes, and no. The missing 2 is like the generation/variant of the model. I bought one last January, the handle broke off this May/June, I went through a nightmare with Best Buy to replace it with the same model, only to get one that used a different wall mount frame (there are two different ones - it's marked on the box whether the line or the U-shaped frame is inside) and differently positioned cabinet mount holes (my cabinet floor looks like swiss cheese after 3 microwaves). The ne unit also replaced the two incandescent (replaceable with LEDs) surface light bulbs with a halogen bulb that will burn you if you touch the microwave after its been on for a while.
So it's the same functionality and features, but slightly different look and feel. The devil is in the details, unfortunately. Good luck! I hope this information helps save you some headache.
A:AnswerThanks so much for your question! The power cord comes out of the top of the unit on the right side (facing the front of the microwave) and it has approximately a 40" power cord (including the plug and base of cord). We hope this helps! Let us know if you need anything else. -Chris@GEA
A:AnswerThe hinge side does come off pretty hard. I got mine off without breaking it but I was questioning whether or not it was going to break. It will come off though without breaking though. Just try not to yank on it. Try to pull it with a steady pressure until it comes off.
A:AnswerHello, that's a great question! We apologize for any confusion. The model is the same, but the extra 5 is an engineering code. For example, if you needed an extra part, searching for the model number that is on your microwave would allow you to see the part breakdown for your specific model. We hope this helps!- Kianna@GEA
A:AnswerThis one also, but on this one the vent was facing to the back and because this microwave is sitting on top os a stove, my husband had to turn the vent around to throw the air out, instead of in. Hope this helps
A:AnswerHey there, and thanks for reaching out to us about this over-the-range microwave! We understand your concerns over venting, and are glad to assist. If you do not have a separate exhaust hood, there are still multiple options for venting - you can recirculate, exhaust outside through the top, or exhaust outside through the back. More detailed information is available on these options starting on page 11 of the Installation Instructions. If you need to review those instructions, you can find them on our GE website by searching for the model number and clicking on the product page. If you are planning on recirculating to vent specifically, there would be one cover plate installed on the back of the unit and one over the blower plate on top; we would recommend reviewing the diagrams in the installation instructions regarding this, to ensure venting is not adversely affected. We hope this information is helpful, and are happy to assist with any other concerns or questions. Best wishes! -Sarah@GEA
A:AnswerHello - Thanks for your question! The Beverage pad is sensor operated, and is designed to heat all kinds of beverages such as coffee, tea, hot chocolate, etc. There isn't a specific time programmed for this feature. It uses the auto cook sensor to sense the steam from the beverage or water whether it is a room-temperature beverage, tap water or even refrigerated beverage as it is heating and heats it to a "hot" temperature. This "hot" temperature is similar to a coffee temperature just brewed from a coffeemaker and is a satisfactory "hot" temperature for the dissolving of instant coffee, hot chocolate, use of a tea bag or the use of the new coffee singles, etc. To operate it, simply depress the BEVERAGE pad and START. If you have any additional questions, please let us know and we'll be happy to help. Thank you! - Sharon@GEA
A:AnswerI just purchased this microwave 3 weeks ago. It will fit in the same space as your prior. However, you will need to use the new bracket it comes with, as we tried to use the wall bracket from our old one we we’re replacing and could not. So make sure you are prepared to do the new bracket install. The vent is on the top
A:AnswerI purchased for $199 the Geek protection for 1 year. I paid only $49.99 for the install. Then the nightmare begins. Although I paid for the installation, I have never been given an appointment time. It has been 8 days and no appointment time. I was told upon paying the installation fee, I would be contacted within 24 hours to schedule the installation. Yes, I was contacted and put on hold for 55 minutes. Only to try again and reached an employee in Panama who also put me on hold for 52 minutes. I hung up in both cases before the employee returned. Finally, days later a phone message instructed me to call. I called and "Sorry, the computer will not let me schedule you" The next day, I got the same automated call and I followed through again. Same story "Sorry, the computer will not let me schedule you." I drove 35 miles to the nearest store where I purchased the microwave only to sit for 1 hour while the Geek agent was placed on hold. I walked out with NO appointment time! Today is 3 days since I went in person. Unbelievably I have NOT been contacted to resolve this issue.
So disappointed in what I thought BEST BUY stood for.
A:AnswerHello,
Thanks for asking! We appreciate the interest and we'd be happy to help. We found that
JVM3160DF2BB is the same as your current model, and the replacement should fit appropriately in it's space. If you have any further questions let us know. Take care!
-Sylvia@GEA
A:AnswerInside dimensions are x 9"h x 20"w with turntable in place. Removing the turntable will give u another 3/4" in height. This is shorter than the microwave I replaced, but am not finding I even notice in my normal use.
A:AnswerHi Carla, we're happy to help answer your question. Yes, model JVM3160RFSS will replace your current unit. You'll be pleased to know that all 30" over-the-range microwaves are approximately the same width and are designed to fit into a 30" wide cabinet opening. Therefore, any of our 30" over-the-range models will work as a replacement for an existing 30" over-the-range model. We hope this helps and we're wishing you the best! - Guy@GEA
A:AnswerHi Fred - Thanks for reaching out to us! We truly appreciate your interest in this over-the-range microwave and are happy to answer this for you. This microwave will include with the mounting hardware (mounting bracket, screws, exhaust adapter) needed for the installation. Please feel free to reach back out to us if you have any additional questions about this installation or using the microwave in the future. We are always happy to help! -Eliza@GEA