A:AnswerThis unit needs to be wired. Check to see if others have a remote thermostat that can wifi to the receiver attached to the furnace. At this time I do not know of one.
A:Answercompatible both apps I use both app because one may say unavailable to connect to server check your wifi connection but I know it is not because I which it to Honeywell total comfort app. One of the other works Its the server problem not my wifi Yes thats why I use bought apps, overall Its ease just check on my phone don't have to climb upstairs.
A:AnswerYou must install a separate humidity controller, such as the Honeywell H46C. If wired in parallel as recommended, this should override the thermostat when humidity rises above the setpoint on the H46C, regardless of temperature. This should allow you to keep the temperature a bit higher. Wiring from the H46C does not connect to the thermostat, but directly to your AC unit controls.
A:Answeryou pretty much just pull it off the wall--I think there is an indent on the back top that allows your finger to easily fit in.
It does not have a battery--but it runs off furnace "c" wire so if you turn off the furnace, the thermostat will turn off.
A:AnswerNo, you need the power wire, mine had the additional wires wrapped around the connected wires and made easy connection to the main unit and the new thermostat
A:AnswerYou can program it however you want right from your cell phone. I have it in my wife's Day Spa. If it is a holiday and no one is working I can turn the temperature down from home. Plus on cold days I can monitor the temperatur in the salon to make sure the heat is working properly.
A:AnswerYes, I would suggest looking at the configuration of the wiring to make sure there is a match prior to purchasing. Depending on a persons budget, they may want to use the Nest products which are also very good.
A:AnswerYes to All of your questions. It has 4 programmable settings for each day,
WAKE, LEAVE, RETURN,SLEEP and you set the time and temperature for each. Also this is a 7 Day programmable
Thermostat which means each day can be set with a different schedule unlike some thermostats that can only be programmed for Weekday and Weekend.
A:AnswerThe RTH6580WFWI-FI THERMOSTAT will not work with only two wires, it needs a 24 volt power source to operate.
That is normally supplied from the furnace with a common wire this means you will need at least 3 wires from the furnace to the thermostat to operate a heat only system.
