Questions & Answers

Q: QuestionIs this switch energy efficient?

• A:Answer Yes, this switch is designed to optimize power use and lower operating costs.

Q: QuestionWhy is this switch silent?

• A:Answer This NETGEAR switch has a fanless design, which makes it silent and ideal for noise-sensitive environments.

Q: QuestionHow many ethernet ports does this switch have?

• A:Answer This NETGEAR switch has 8 gigabit ethernet ports.

Q: QuestionWhat mounting options are available for this ethernet switch?

• A:Answer This ethernet switch supports both desktop and wall-mount placement.

Q: QuestionWhat is the weight of this ethernet switch?

• A:Answer This ethernet switch weighs 1.04 pounds.

Q: QuestionMy question is this Netgear 8 - port device connecting to Router or Modem ?

Asked 5 years ago by zidom.

• A:Answer Do not connect this directly to a cable modem that does not have a built-in router! If you connect this to a stand-alone cable modem (with only one port), any additional devices or computers connected to it will be directly exposed to the internet with no firewall protection. In addition, some devices may not function depending on how many IP addresses your ISP will issue.

  Answered 5 years ago by Curious

  Helpful (18)Unhelpful (0)ReportAnswer this questionShow more answers (5)

Q: QuestionI have one of these downstairs. I need one upstairs. Can i connect two of these together to add more landline connections upstairs? If so, what ports do i use -- port 8 on the old and port 8 on the new?

Asked 3 years ago by SpongeBOB.

• A:Answer Yes you can connect two of these literally you can plug it into any port, this Netgear switch model is a plug and play switch layer 2, so there is no specific Uplink, but of course if you want to be organize, use port 1 to port 1 or port 8 and port 8 for your Uplink.

  Answered 3 years ago by BlackBeltITVerified Purchase

  Helpful (4)Unhelpful (0)ReportAnswer this questionShow more answers (5)

Q: QuestionNetgear 8 port 10/100/1000 Gigabit Ethernet Unmanaged Switch - Blue: Does the switch act like an extender?

Asked 4 years ago by Jason.

• A:Answer Yes, except that with an extender, your internet speeds are reduced by approximately 50%. A switch allows you to send your internet to more devices, without a drop in speed.

  Answered 4 years ago by VorstevVerified Purchase

  Helpful (6)Unhelpful (0)ReportAnswer this questionShow more answers (5)

Q: QuestionDoes it require a flipped cable to go from router to the switch or does it automatically detect and flip it internally?

Asked 5 years ago by Curt.

• A:Answer Automatic connectivity

  Answered 5 years ago by Nickie

  Helpful (9)Unhelpful (1)ReportAnswer this questionShow more answers (5)

Q: Questionwhat version of the 108 is this? please be specific or provide extract model number, thanks! there's grey boxes, blue, etc. I have seen up to version 3 of the 108 and another that said 108E Thanks

Asked 4 years ago by matt.

• A:Answer The model number is listed as GS108-400NAS and the blue one that I bought was made in Vietnam.

  Answered 4 years ago by Frank

  Helpful (5)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionCan I connect a Smart Television if the TV has the LAN connector jack?

Asked 5 years ago by WestCo.

• A:Answer Yes, works very well. with a smart TV. Use it extensively for You Tube and other web services.

  Answered 4 years ago by RiseVerified Purchase

  Helpful (3)Unhelpful (0)ReportAnswer this questionShow more answers (5)

Q: Questionhow many users/devices can use this?

Asked 5 years ago by tay123.

• A:Answer This is an 8-port switch, so by itself you can connect 7 devices (assuming the 8th port is connecting to your network) OR 8 connections by itself. It can also be used with other switches, but as it is un-managed and only layer 2, it will be limited to use in one subnet.

  Answered 5 years ago by ComisshaVerified Purchase

  Helpful (3)Unhelpful (0)ReportAnswer this questionShow more answers (5)

Q: QuestionWhere is it made?

Asked 4 years ago by StephenM.

• A:Answer Viet Nam

  Answered 2 years ago by JoeH

  Helpful (2)Unhelpful (0)ReportAnswer this questionShow more answers (4)

Q: QuestionI have a 5 port plug-n-play switch that bottlenecks my 200 mbs signal to 100 mbs. Will this switch have a 200 mbs throuhput?

Asked 4 years ago by diddysan.

• A:Answer Sounds like you have a 10/100 switch currently. This switch is 10/100/1000 so I would think it would free up your bottleneck just fine.

  Answered 4 years ago by thebad1Verified Purchase

  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (5)

Q: QuestionI'm going to use this with my new xfi modem from xfinity since the new modem doesn't have the needed ports my old xfinity modem had but will give me more speed. Can I use an old cat5 cable to go from the modem to the Netgear switch or do I need Cat7 ?

Asked 5 years ago by matto.

• A:Answer A bit overdue but a Cat5E or better is recommended since this switch supports gigabit speeds to get the maximum performance.

  Answered 5 years ago by DocHollywood11

  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (5)

Q: QuestionWhich version is this switch (GS108v4, GS108v3, or GS108v2)? Also, if I connect two switches together with Ethernet cabling, do I need to use a crossover cable? Thanks

Asked 10 months ago by Swith4ME.

Q: QuestionI need a replacement power supply adapter 12W, 12V DC, 1A for this switch. Does Best Buy sell one for this switch and if so what product can I get that works with it?

Asked 1 year ago by Brazoo.

Q: QuestionWhich port do you connect the incoming signal from the internet router?

Asked 1 year ago by Mikey.

Q: QuestionDoes each port supply 1 gig

Asked 2 years ago by Anonymous.

• A:Answer As far as I understand it, yes.

  Answered 2 years ago by AOG1112Verified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (4)